From: Robert Richter <rrichter@marvell.com>
To: Borislav Petkov <bp@alien8.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Tony Luck <tony.luck@intel.com>
Cc: James Morse <james.morse@arm.com>,
Aristeu Rozanski <aris@redhat.com>,
Robert Richter <rrichter@marvell.com>,
<linux-edac@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 07/11] EDAC/ghes: Have a separate code path for creating the fake MC
Date: Fri, 6 Mar 2020 16:13:14 +0100 [thread overview]
Message-ID: <20200306151318.17422-8-rrichter@marvell.com> (raw)
In-Reply-To: <20200306151318.17422-1-rrichter@marvell.com>
The code in ghes_edac_register() switches back and forth between
standard and fake controller creation. Do one thing only and separate
the code path that creates the fake MC.
Note: For better review the code is not yet carved out in separate
functions.
Signed-off-by: Robert Richter <rrichter@marvell.com>
---
drivers/edac/ghes_edac.c | 65 ++++++++++++++++++++++++----------------
1 file changed, 40 insertions(+), 25 deletions(-)
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 5a4c9694bbff..7ead5667ed73 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -535,7 +535,6 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
struct ghes_dimm_fill dimm_fill;
int rc = 0, num_dimm = 0;
struct mem_ctl_info *mci;
- bool fake = false;
int idx;
if (IS_ENABLED(CONFIG_X86)) {
@@ -559,23 +558,42 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
/* Get the number of DIMMs */
dmi_walk(ghes_edac_count_dimms, &num_dimm);
- /* Check if we've got a bogus BIOS */
- if (num_dimm == 0) {
- fake = true;
- num_dimm = 1;
- }
+ if (!num_dimm) {
+ /*
+ * Bogus BIOS: Ignore DMI topology and use a single MC
+ * with only one DIMM for the whole address range to
+ * catch all errros.
+ */
+ struct dimm_info *dimm;
- mci = ghes_mc_create(dev, 0, num_dimm);
- if (!mci) {
- rc = -ENOMEM;
- goto unlock;
- }
+ mci = ghes_mc_create(dev, 0, 1);
+ if (!mci) {
+ rc = -ENOMEM;
+ goto unlock;
+ }
+
+ dimm = edac_get_dimm_by_index(mci, 0);
+
+ dimm->nr_pages = 1;
+ dimm->grain = 128;
+ dimm->mtype = MEM_UNKNOWN;
+ dimm->dtype = DEV_UNKNOWN;
+ dimm->edac_mode = EDAC_SECDED;
+
+ snprintf(dimm->label, sizeof(dimm->label), "unknown memory");
+
+ rc = ghes_mc_add_or_free(mci);
+ if (rc)
+ goto unlock;
- if (fake) {
pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
pr_info("work on such system. Use this driver with caution\n");
- } else if (idx < 0) {
+
+ goto out;
+ }
+
+ if (idx < 0) {
pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
@@ -584,24 +602,21 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
pr_info("This system has %d DIMM sockets.\n", num_dimm);
}
- if (!fake) {
- dimm_fill.index = 0;
- dimm_fill.mci = mci;
- dmi_walk(ghes_edac_dmidecode, &dimm_fill);
- } else {
- struct dimm_info *dimm = edac_get_dimm(mci, 0, 0, 0);
-
- dimm->nr_pages = 1;
- dimm->grain = 128;
- dimm->mtype = MEM_UNKNOWN;
- dimm->dtype = DEV_UNKNOWN;
- dimm->edac_mode = EDAC_SECDED;
+ mci = ghes_mc_create(dev, 0, num_dimm);
+ if (!mci) {
+ rc = -ENOMEM;
+ goto unlock;
}
+ dimm_fill.index = 0;
+ dimm_fill.mci = mci;
+ dmi_walk(ghes_edac_dmidecode, &dimm_fill);
+
rc = ghes_mc_add_or_free(mci);
if (rc)
goto unlock;
+out:
/* only set on success */
refcount_set(&ghes_refcount, 1);
--
2.20.1
next prev parent reply other threads:[~2020-03-06 15:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 15:13 [PATCH 00/11] EDAC/ghes: Cleanup, rework and improvement of memory reporting Robert Richter
2020-03-06 15:13 ` [PATCH 01/11] EDAC/mc: Use int type for parameters of edac_mc_alloc() Robert Richter
2020-04-06 11:38 ` Matthias Brugger
2020-03-06 15:13 ` [PATCH 02/11] EDAC/ghes: Setup DIMM label from DMI and use it in error reports Robert Richter
2020-03-06 15:13 ` [PATCH 03/11] EDAC/ghes: Remove local variable rdr_mask in ghes_edac_dmidecode() Robert Richter
2020-04-06 11:51 ` Matthias Brugger
2020-03-06 15:13 ` [PATCH 04/11] EDAC/ghes: Remove unused members of struct ghes_edac_pvt, rename it to ghes_mci Robert Richter
2020-03-06 15:13 ` [PATCH 05/11] EDAC/ghes: Cleanup struct ghes_edac_dimm_fill, rename it to ghes_dimm_fill Robert Richter
2020-03-16 9:29 ` Borislav Petkov
2020-03-06 15:13 ` [PATCH 06/11] EDAC/ghes: Carve out MC device handling into separate functions Robert Richter
2020-03-16 9:31 ` Borislav Petkov
2020-03-16 12:12 ` Robert Richter
2020-03-06 15:13 ` Robert Richter [this message]
2020-03-06 15:13 ` [PATCH 08/11] EDAC/ghes: Carve out code into ghes_edac_register_{one,fake}() Robert Richter
2020-03-06 15:13 ` [PATCH 09/11] EDAC/ghes: Implement DIMM mapping table for SMBIOS handles Robert Richter
2020-03-16 9:40 ` Borislav Petkov
2020-03-06 15:13 ` [PATCH 10/11] EDAC/ghes: Create an own device for each mci Robert Richter
2020-03-16 9:45 ` Borislav Petkov
2020-03-06 15:13 ` [PATCH 11/11] EDAC/ghes: Create one memory controller per physical memory array Robert Richter
2020-03-16 9:51 ` Borislav Petkov
2020-03-17 16:34 ` John Garry
2020-03-17 22:14 ` Kani, Toshi
2020-03-17 22:50 ` Borislav Petkov
2020-03-17 22:53 ` Kani, Toshi
2020-03-18 0:10 ` Robert Richter
2020-03-24 11:32 ` Xiaofei Tan
2020-03-10 20:18 ` [PATCH 00/11] EDAC/ghes: Cleanup, rework and improvement of memory reporting Aristeu Rozanski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306151318.17422-8-rrichter@marvell.com \
--to=rrichter@marvell.com \
--cc=aris@redhat.com \
--cc=bp@alien8.de \
--cc=james.morse@arm.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).