From: Howard Chung <howardchung@google.com>
To: linux-bluetooth@vger.kernel.org, marcel@holtmann.org
Cc: chromeos-bluetooth-upstreaming@chromium.org,
Howard Chung <howardchung@google.com>,
"David S. Miller" <davem@davemloft.net>,
Johan Hedberg <johan.hedberg@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>
Subject: [Bluez PATCH v2] Bluetooth: L2CAP: handle l2cap config request during open state
Date: Thu, 12 Mar 2020 12:35:27 +0800 [thread overview]
Message-ID: <20200312123453.Bluez.v2.1.I50b301a0464eb68e3d62721bf59e11ed2617c415@changeid> (raw)
According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.
The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.
=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #22
L2CAP: Connection Request (0x02) ident 2 len 4
PSM: 1 (0x0001)
Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16 #23
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #24
L2CAP: Configure Request (0x04) ident 2 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #25
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #26
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #27
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #28
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5 #29
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #30
L2CAP: Configure Response (0x05) ident 2 len 6
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20 #31
L2CAP: Configure Request (0x04) ident 3 len 12
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 91 02 11 11 ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14 #32
L2CAP: Command Reject (0x01) ident 3 len 6
Reason: Invalid CID in request (0x0002)
Destination CID: 64
Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5 #33
Num handles: 1
Handle: 256
Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12 #22
L2CAP: Connection Request (0x02) ident 2 len 4
PSM: 1 (0x0001)
Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16 #23
L2CAP: Connection Response (0x03) ident 2 len 8
Destination CID: 64
Source CID: 65
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #24
L2CAP: Configure Request (0x04) ident 2 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #25
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #26
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16 #27
L2CAP: Configure Request (0x04) ident 3 len 8
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #28
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5 #29
Num handles: 1
Handle: 256
Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14 #30
L2CAP: Configure Response (0x05) ident 2 len 6
Source CID: 64
Flags: 0x0000
Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20 #31
L2CAP: Configure Request (0x04) ident 3 len 12
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [hint]
01 00 91 02 11 11 .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18 #32
L2CAP: Configure Response (0x05) ident 3 len 10
Source CID: 65
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12 #33
L2CAP: Configure Request (0x04) ident 3 len 4
Destination CID: 65
Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5 #34
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5 #35
Num handles: 1
Handle: 256
Count: 1
...
Signed-off-by: Howard Chung <howardchung@google.com>
---
Changes in v2:
- Updated commit messages
net/bluetooth/l2cap_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 697c0f7f2c1a..5e6e35ab44dd 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4300,7 +4300,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
return 0;
}
- if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) {
+ if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2 &&
+ chan->state != BT_CONNECTED) {
cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
chan->dcid);
goto unlock;
--
2.25.1.481.gfbce0eb801-goog
next reply other threads:[~2020-03-12 4:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 4:35 Howard Chung [this message]
2020-03-12 7:23 ` [Bluez PATCH v2] Bluetooth: L2CAP: handle l2cap config request during open state Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312123453.Bluez.v2.1.I50b301a0464eb68e3d62721bf59e11ed2617c415@changeid \
--to=howardchung@google.com \
--cc=chromeos-bluetooth-upstreaming@chromium.org \
--cc=davem@davemloft.net \
--cc=johan.hedberg@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).