From: peng.fan@nxp.com
To: shawnguo@kernel.org, s.hauer@pengutronix.de,
leonard.crestez@nxp.com, sboyd@kernel.org, abel.vesa@nxp.com
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Anson.Huang@nxp.com,
daniel.baluta@nxp.com, aford173@gmail.com, ping.bai@nxp.com,
jun.li@nxp.com, l.stach@pengutronix.de, andrew.smirnov@gmail.com,
agx@sigxcpu.org, angus@akkea.ca, heiko@sntech.de,
fugang.duan@nxp.com, linux-clk@vger.kernel.org,
Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 03/10] clk: imx: imx8mp: fix pll mux bit
Date: Thu, 12 Mar 2020 17:01:25 +0800 [thread overview]
Message-ID: <1584003692-25523-4-git-send-email-peng.fan@nxp.com> (raw)
In-Reply-To: <1584003692-25523-1-git-send-email-peng.fan@nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Same to i.MX8MN/i.MX8MM, pll BYPASS bit should be kept inside pll
driver for glitchless freq setting following spec. If exposing the
bit, that means pll driver and clk driver has two paths to touch
this bit, which is wrong.
So use EXT_BYPASS bit here.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/clk/imx/clk-imx8mp.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index e05ec56df285..e9ed8a188031 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -486,16 +486,16 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
hws[IMX8MP_SYS_PLL2] = imx_clk_hw_pll14xx("sys_pll2", "sys_pll2_ref_sel", anatop_base + 0x104, &imx_1416x_pll);
hws[IMX8MP_SYS_PLL3] = imx_clk_hw_pll14xx("sys_pll3", "sys_pll3_ref_sel", anatop_base + 0x114, &imx_1416x_pll);
- hws[IMX8MP_AUDIO_PLL1_BYPASS] = imx_clk_hw_mux_flags("audio_pll1_bypass", anatop_base, 4, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_AUDIO_PLL2_BYPASS] = imx_clk_hw_mux_flags("audio_pll2_bypass", anatop_base + 0x14, 4, 1, audio_pll2_bypass_sels, ARRAY_SIZE(audio_pll2_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_VIDEO_PLL1_BYPASS] = imx_clk_hw_mux_flags("video_pll1_bypass", anatop_base + 0x28, 4, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_DRAM_PLL_BYPASS] = imx_clk_hw_mux_flags("dram_pll_bypass", anatop_base + 0x50, 4, 1, dram_pll_bypass_sels, ARRAY_SIZE(dram_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_GPU_PLL_BYPASS] = imx_clk_hw_mux_flags("gpu_pll_bypass", anatop_base + 0x64, 4, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_VPU_PLL_BYPASS] = imx_clk_hw_mux_flags("vpu_pll_bypass", anatop_base + 0x74, 4, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_ARM_PLL_BYPASS] = imx_clk_hw_mux_flags("arm_pll_bypass", anatop_base + 0x84, 4, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL1_BYPASS] = imx_clk_hw_mux_flags("sys_pll1_bypass", anatop_base + 0x94, 4, 1, sys_pll1_bypass_sels, ARRAY_SIZE(sys_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL2_BYPASS] = imx_clk_hw_mux_flags("sys_pll2_bypass", anatop_base + 0x104, 4, 1, sys_pll2_bypass_sels, ARRAY_SIZE(sys_pll2_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL3_BYPASS] = imx_clk_hw_mux_flags("sys_pll3_bypass", anatop_base + 0x114, 4, 1, sys_pll3_bypass_sels, ARRAY_SIZE(sys_pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_AUDIO_PLL1_BYPASS] = imx_clk_hw_mux_flags("audio_pll1_bypass", anatop_base, 16, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_AUDIO_PLL2_BYPASS] = imx_clk_hw_mux_flags("audio_pll2_bypass", anatop_base + 0x14, 16, 1, audio_pll2_bypass_sels, ARRAY_SIZE(audio_pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_VIDEO_PLL1_BYPASS] = imx_clk_hw_mux_flags("video_pll1_bypass", anatop_base + 0x28, 16, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_DRAM_PLL_BYPASS] = imx_clk_hw_mux_flags("dram_pll_bypass", anatop_base + 0x50, 16, 1, dram_pll_bypass_sels, ARRAY_SIZE(dram_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_GPU_PLL_BYPASS] = imx_clk_hw_mux_flags("gpu_pll_bypass", anatop_base + 0x64, 28, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_VPU_PLL_BYPASS] = imx_clk_hw_mux_flags("vpu_pll_bypass", anatop_base + 0x74, 28, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_ARM_PLL_BYPASS] = imx_clk_hw_mux_flags("arm_pll_bypass", anatop_base + 0x84, 28, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL1_BYPASS] = imx_clk_hw_mux_flags("sys_pll1_bypass", anatop_base + 0x94, 28, 1, sys_pll1_bypass_sels, ARRAY_SIZE(sys_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL2_BYPASS] = imx_clk_hw_mux_flags("sys_pll2_bypass", anatop_base + 0x104, 28, 1, sys_pll2_bypass_sels, ARRAY_SIZE(sys_pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL3_BYPASS] = imx_clk_hw_mux_flags("sys_pll3_bypass", anatop_base + 0x114, 28, 1, sys_pll3_bypass_sels, ARRAY_SIZE(sys_pll3_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MP_AUDIO_PLL1_OUT] = imx_clk_hw_gate("audio_pll1_out", "audio_pll1_bypass", anatop_base, 13);
hws[IMX8MP_AUDIO_PLL2_OUT] = imx_clk_hw_gate("audio_pll2_out", "audio_pll2_bypass", anatop_base + 0x14, 13);
--
2.16.4
next prev parent reply other threads:[~2020-03-12 9:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 9:01 [PATCH 00/10] clk: imx: fixes and improve for i.MX8M peng.fan
2020-03-12 9:01 ` [PATCH 01/10] arm64: dts: imx8m: assign clocks for A53 peng.fan
2020-03-12 9:01 ` [PATCH 02/10] clk: imx8m: drop clk_hw_set_parent " peng.fan
2020-03-12 9:01 ` peng.fan [this message]
2020-03-12 9:01 ` [PATCH 04/10] clk: imx8mp: Define gates for pll1/2 fixed dividers peng.fan
2020-03-12 9:01 ` [PATCH 05/10] clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code peng.fan
2020-03-12 9:01 ` [PATCH 06/10] clk: imx8m: migrate A53 clk root to use composite core peng.fan
2020-03-12 9:01 ` [PATCH 07/10] clk: imx: add mux ops for i.MX8M composite clk peng.fan
2020-03-12 9:01 ` [PATCH 08/10] clk: imx: add imx8m_clk_hw_composite_bus peng.fan
2020-03-12 9:01 ` [PATCH 09/10] clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice peng.fan
2020-03-12 9:01 ` [PATCH 10/10] clk: imx8mp: mark memrepair clock as critical peng.fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1584003692-25523-4-git-send-email-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=aford173@gmail.com \
--cc=agx@sigxcpu.org \
--cc=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=daniel.baluta@nxp.com \
--cc=festevam@gmail.com \
--cc=fugang.duan@nxp.com \
--cc=heiko@sntech.de \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ping.bai@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).