From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, Lokesh Vutla <lokeshvutla@ti.com>,
Tony Lindgren <tony@atomide.com>
Subject: [PATCH 06/21] clocksource/drivers/timer-ti-dm: Do not update counter on updating the period
Date: Wed, 18 Mar 2020 18:41:16 +0100 [thread overview]
Message-ID: <20200318174131.20582-6-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20200318174131.20582-1-daniel.lezcano@linaro.org>
From: Lokesh Vutla <lokeshvutla@ti.com>
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value
in Load register(OMAP_TIMER_LOAD_REG) into Counter register
(OMAP_TIMER_COUNTER_REG).
omap_dm_timer_set_load() writes into trigger register every time load
register is updated. When timer is configured in pwm mode, this causes
disruption in current pwm cycle, which is not expected especially when
pwm is used as PPS signal for synchronized PTP clocks. So do not write
into trigger register on updating the period.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200224050753.17784-3-lokeshvutla@ti.com
---
drivers/clocksource/timer-ti-dm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 269a994d6a99..acc93600d351 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -577,7 +577,6 @@ static int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
- omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
/* Save the context */
timer->context.tclr = l;
timer->context.tldr = load;
--
2.17.1
next prev parent reply other threads:[~2020-03-18 17:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 17:38 [GIT PULL] timer drivers for v5.7 Daniel Lezcano
2020-03-18 17:41 ` [PATCH 01/21] clocksource/drivers/fttmr010: Parametrise shutdown Daniel Lezcano
2020-03-18 17:41 ` [PATCH 02/21] clocksource/drivers/fttmr010: Set interrupt and shutdown Daniel Lezcano
2020-03-18 17:41 ` [PATCH 03/21] dt-bindings: fttmr010: Add ast2600 compatible Daniel Lezcano
2020-03-18 17:41 ` [PATCH 04/21] clocksource: Add driver for the Ingenic JZ47xx OST Daniel Lezcano
2020-03-18 17:41 ` [PATCH 05/21] clocksource/drivers/owl: Improve owl_timer_init fail messages Daniel Lezcano
2020-03-18 17:41 ` Daniel Lezcano [this message]
2020-03-18 17:41 ` [PATCH 07/21] clocksource/drivers/timer-ti-dm: Drop bogus omap_dm_timer_of_set_source() Daniel Lezcano
2020-03-18 17:41 ` [PATCH 08/21] dt-bindings: timer: Add X1000 bindings Daniel Lezcano
2020-03-18 17:41 ` [PATCH 09/21] clocksource/drivers/ingenic: Add support for TCU of X1000 Daniel Lezcano
2020-03-18 17:41 ` [PATCH 10/21] clocksource: Replace setup_irq() by request_irq() Daniel Lezcano
2020-03-27 10:24 ` Linus Walleij
2020-03-18 17:41 ` [PATCH 11/21] clocksource/drivers/timer-cs5535: Request irq with non-NULL dev_id Daniel Lezcano
2020-03-18 17:41 ` [PATCH 12/21] clocksource/drivers/timer-microchip-pit64b: Fix rate for gck Daniel Lezcano
2020-03-18 17:41 ` [PATCH 13/21] clocksource/drivers/timer-ti-dm: Convert to SPDX identifier Daniel Lezcano
2020-03-18 17:41 ` [PATCH 14/21] clocksource/drivers/timer-ti-dm: Prepare for using cpuidle Daniel Lezcano
2020-03-18 17:41 ` [PATCH 15/21] clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore Daniel Lezcano
2020-03-18 17:41 ` [PATCH 16/21] clocksource/drivers/timer-ti-dm: Do not update counter on updating the period Daniel Lezcano
2020-03-18 17:41 ` [PATCH 17/21] clocksource/drivers/timer-ti-dm: Add support to get pwm current status Daniel Lezcano
2020-03-18 17:41 ` [PATCH 18/21] clocksource/drivers/timer-ti-dm: Enable autoreload in set_pwm Daniel Lezcano
2020-03-18 17:41 ` [PATCH 19/21] clocksource/drivers/imx-tpm: Remove unused includes Daniel Lezcano
2020-03-18 17:41 ` [PATCH 20/21] clocksource/drivers/imx-sysctr: " Daniel Lezcano
2020-03-18 17:41 ` [PATCH 21/21] clocksource/drivers/timer-probe: Avoid creating dead devices Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318174131.20582-6-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).