[16/21] clocksource/drivers/timer-ti-dm: Do not update counter on updating the period
diff mbox series

Message ID 20200318174131.20582-16-daniel.lezcano@linaro.org
State Accepted
Commit aff7665dc64b60c1f93d6e52fde297ae6b8999ae
Headers show
Series
  • [01/21] clocksource/drivers/fttmr010: Parametrise shutdown
Related show

Commit Message

Daniel Lezcano March 18, 2020, 5:41 p.m. UTC 
From: Lokesh Vutla <lokeshvutla@ti.com>

Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value
in Load register(OMAP_TIMER_LOAD_REG) into Counter register
(OMAP_TIMER_COUNTER_REG).

omap_dm_timer_set_load() writes into trigger register every time load
register is updated. When timer is configured in pwm mode, this causes
disruption in current pwm cycle, which is not expected especially when
pwm is used as PPS signal for synchronized PTP clocks. So do not write
into trigger register on updating the period.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-5-lokeshvutla@ti.com
---
 drivers/clocksource/timer-ti-dm.c | 1 -
 1 file changed, 1 deletion(-)

Patch
diff mbox series 

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
index 1d1bea79cbf1..b565b8456e5c 100644
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -579,7 +579,6 @@  static int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 	omap_dm_timer_disable(timer);
 	return 0;
 }