From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Ben Gardon <bgardon@google.com>,
Junaid Shahid <junaids@google.com>,
Liran Alon <liran.alon@oracle.com>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
John Haxby <john.haxby@oracle.com>,
Miaohe Lin <linmiaohe@huawei.com>,
Tom Lendacky <thomas.lendacky@amd.com>
Subject: [PATCH v3 22/37] KVM: x86: Rename ->tlb_flush() to ->tlb_flush_all()
Date: Fri, 20 Mar 2020 14:28:18 -0700 [thread overview]
Message-ID: <20200320212833.3507-23-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200320212833.3507-1-sean.j.christopherson@intel.com>
Rename ->tlb_flush() to ->tlb_flush_all() in preparation for adding a
new hook to flush only the current ASID/context.
Opportunstically replace the comment in vmx_flush_tlb() that explains
why it flushes all EPTP/VPID contexts with a comment explaining why it
unconditionally uses INVEPT when EPT is enabled. I.e. rely on the "all"
part of the name to clarify why it does global INVEPT/INVVPID.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kvm/mmu/mmu.c | 2 +-
arch/x86/kvm/svm.c | 2 +-
arch/x86/kvm/vmx/vmx.c | 16 +++++++---------
arch/x86/kvm/x86.c | 6 +++---
5 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index a5dfab4642d6..0392a9db110d 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1105,7 +1105,7 @@ struct kvm_x86_ops {
unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
- void (*tlb_flush)(struct kvm_vcpu *vcpu);
+ void (*tlb_flush_all)(struct kvm_vcpu *vcpu);
int (*tlb_remote_flush)(struct kvm *kvm);
int (*tlb_remote_flush_with_range)(struct kvm *kvm,
struct kvm_tlb_range *range);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index a87b8f9f3b1f..c357cc79f0f3 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -5177,7 +5177,7 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
if (r)
goto out;
kvm_mmu_load_pgd(vcpu);
- kvm_x86_ops->tlb_flush(vcpu);
+ kvm_x86_ops->tlb_flush_all(vcpu);
out:
return r;
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8c3700b44eb4..10e5b8c4b515 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -7405,7 +7405,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
.get_rflags = svm_get_rflags,
.set_rflags = svm_set_rflags,
- .tlb_flush = svm_flush_tlb,
+ .tlb_flush_all = svm_flush_tlb,
.tlb_flush_gva = svm_flush_tlb_gva,
.tlb_flush_guest = svm_flush_tlb,
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 2d0a8c7654d7..d6cf625b4011 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2849,18 +2849,16 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
#endif
-static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
+static void vmx_flush_tlb_all(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
/*
- * Flush all EPTP/VPID contexts, as the TLB flush _may_ have been
- * invoked via kvm_flush_remote_tlbs(). Flushing remote TLBs requires
- * all contexts to be flushed, not just the active context.
- *
- * Note, this also ensures a deferred TLB flush with VPID enabled and
- * EPT disabled invalidates the "correct" VPID, by nuking both L1 and
- * L2's VPIDs.
+ * INVEPT must be issued when EPT is enabled, irrespective of VPID, as
+ * the CPU is not required to invalidate guest-physical mappings on
+ * VM-Entry, even if VPID is disabled. Guest-physical mappings are
+ * associated with the root EPT structure and not any particular VPID
+ * (INVVPID also isn't required to invalidate guest-physical mappings).
*/
if (enable_ept) {
ept_sync_global();
@@ -7922,7 +7920,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
.get_rflags = vmx_get_rflags,
.set_rflags = vmx_set_rflags,
- .tlb_flush = vmx_flush_tlb,
+ .tlb_flush_all = vmx_flush_tlb_all,
.tlb_flush_gva = vmx_flush_tlb_gva,
.tlb_flush_guest = vmx_flush_tlb_guest,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 84cbd7ca1e18..333968e5ef3c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2696,10 +2696,10 @@ static void kvmclock_reset(struct kvm_vcpu *vcpu)
vcpu->arch.time = 0;
}
-static void kvm_vcpu_flush_tlb(struct kvm_vcpu *vcpu)
+static void kvm_vcpu_flush_tlb_all(struct kvm_vcpu *vcpu)
{
++vcpu->stat.tlb_flush;
- kvm_x86_ops->tlb_flush(vcpu);
+ kvm_x86_ops->tlb_flush_all(vcpu);
}
static void record_steal_time(struct kvm_vcpu *vcpu)
@@ -8223,7 +8223,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
if (kvm_check_request(KVM_REQ_LOAD_MMU_PGD, vcpu))
kvm_mmu_load_pgd(vcpu);
if (kvm_check_request(KVM_REQ_TLB_FLUSH, vcpu))
- kvm_vcpu_flush_tlb(vcpu);
+ kvm_vcpu_flush_tlb_all(vcpu);
if (kvm_check_request(KVM_REQ_REPORT_TPR_ACCESS, vcpu)) {
vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
r = 0;
--
2.24.1
next prev parent reply other threads:[~2020-03-20 21:30 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 21:27 [PATCH v3 00/37] KVM: x86: TLB flushing fixes and enhancements Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 01/37] KVM: VMX: Flush all EPTP/VPID contexts on remote TLB flush Sean Christopherson
2021-08-03 1:45 ` Lai Jiangshan
2021-08-03 15:39 ` Sean Christopherson
2021-08-04 3:11 ` Lai Jiangshan
2021-08-04 15:33 ` Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 02/37] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT) Sean Christopherson
2020-03-23 14:51 ` Vitaly Kuznetsov
2020-03-23 15:45 ` Sean Christopherson
2020-03-23 23:46 ` Paolo Bonzini
2020-03-20 21:27 ` [PATCH v3 03/37] KVM: nVMX: Invalidate all EPTP contexts when emulating INVEPT for L1 Sean Christopherson
2020-03-23 15:24 ` Vitaly Kuznetsov
2020-03-23 15:53 ` Sean Christopherson
2020-03-23 16:24 ` Jim Mattson
2020-03-23 16:28 ` Sean Christopherson
2020-03-23 16:36 ` Jim Mattson
2020-03-23 16:44 ` Sean Christopherson
2020-03-23 23:50 ` Paolo Bonzini
2020-03-24 0:12 ` Jim Mattson
2020-03-30 18:38 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 04/37] KVM: nVMX: Invalidate all roots when emulating INVVPID without EPT Sean Christopherson
2020-03-23 15:34 ` Vitaly Kuznetsov
2020-03-23 16:04 ` Sean Christopherson
2020-03-23 16:33 ` Vitaly Kuznetsov
2020-03-23 16:50 ` Sean Christopherson
2020-03-23 16:57 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 05/37] KVM: x86: Export kvm_propagate_fault() (as kvm_inject_emulated_page_fault) Sean Christopherson
2020-03-23 15:47 ` Vitaly Kuznetsov
2020-03-23 16:24 ` Sean Christopherson
2020-03-23 23:56 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 06/37] KVM: x86: Consolidate logic for injecting page faults to L1 Sean Christopherson
2020-03-24 0:47 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 07/37] KVM: x86: Sync SPTEs when injecting page/EPT fault into L1 Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 08/37] KVM: VMX: Skip global INVVPID fallback if vpid==0 in vpid_sync_context() Sean Christopherson
2020-03-25 9:33 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 09/37] KVM: VMX: Use vpid_sync_context() directly when possible Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 10/37] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 11/37] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 12/37] KVM: VMX: Drop redundant capability checks in low level INVVPID helpers Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 13/37] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 14/37] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
2020-03-25 10:23 ` Vitaly Kuznetsov
2020-03-25 15:41 ` Paolo Bonzini
2020-03-25 16:08 ` Vitaly Kuznetsov
2020-03-25 15:48 ` Sean Christopherson
2020-03-25 16:11 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 15/37] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 16/37] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-03-25 11:23 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 17/37] KVM: SVM: Wire up ->tlb_flush_guest() directly to svm_flush_tlb() Sean Christopherson
2020-03-25 11:23 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 18/37] KVM: VMX: Move vmx_flush_tlb() to vmx.c Sean Christopherson
2020-03-25 11:25 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 19/37] KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h Sean Christopherson
2020-03-25 11:25 ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 20/37] KVM: VMX: Introduce vmx_flush_tlb_current() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 21/37] KVM: SVM: Document the ASID logic in svm_flush_tlb() Sean Christopherson
2020-03-20 21:28 ` Sean Christopherson [this message]
2020-03-20 21:28 ` [PATCH v3 23/37] KVM: nVMX: Add helper to handle TLB flushes on nested VM-Enter/VM-Exit Sean Christopherson
2021-10-28 13:11 ` Lai Jiangshan
2021-10-28 15:22 ` Sean Christopherson
2021-10-29 0:44 ` Lai Jiangshan
2021-10-29 17:10 ` Sean Christopherson
2021-10-30 1:34 ` Lai Jiangshan
2021-11-04 17:47 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 24/37] KVM: x86: Introduce KVM_REQ_TLB_FLUSH_CURRENT to flush current ASID Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 25/37] KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 26/37] KVM: nVMX: Selectively use TLB_FLUSH_CURRENT for nested VM-Enter/VM-Exit Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 27/37] KVM: nVMX: Reload APIC access page on nested VM-Exit only if necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 28/37] KVM: VMX: Retrieve APIC access page HPA only when necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 29/37] KVM: VMX: Don't reload APIC access page if its control is disabled Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 30/37] KVM: x86/mmu: Move fast_cr3_switch() side effects to __kvm_mmu_new_cr3() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 31/37] KVM: x86/mmu: Add separate override for MMU sync during fast CR3 switch Sean Christopherson
2020-03-24 11:07 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 32/37] KVM: x86/mmu: Add module param to force TLB flush on root reuse Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 33/37] KVM: nVMX: Skip MMU sync on nested VMX transition when possible Sean Christopherson
2020-03-24 11:19 ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 34/37] KVM: nVMX: Don't flush TLB on nested VMX transition Sean Christopherson
2020-03-24 11:20 ` Paolo Bonzini
2020-03-24 18:10 ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 35/37] KVM: nVMX: Free only the affected contexts when emulating INVEPT Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 36/37] KVM: x86: Replace "cr3" with "pgd" in "new cr3/pgd" related code Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 37/37] KVM: VMX: Clean cr3/pgd handling in vmx_load_mmu_pgd() Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320212833.3507-23-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=bgardon@google.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jmattson@google.com \
--cc=john.haxby@oracle.com \
--cc=joro@8bytes.org \
--cc=junaids@google.com \
--cc=kvm@vger.kernel.org \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=pbonzini@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).