From: Ezequiel Garcia <ezequiel@collabora.com>
To: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Tomasz Figa <tfiga@chromium.org>,
Nicolas Dufresne <nicolas@ndufresne.ca>,
kernel@collabora.com, Hans Verkuil <hverkuil@xs4all.nl>,
Sean Young <sean@mess.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Michael Ira Krufky <mkrufky@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Ezequiel Garcia <ezequiel@collabora.com>
Subject: [PATCH] media: Refactor configuration options
Date: Sat, 21 Mar 2020 03:41:27 -0300 [thread overview]
Message-ID: <20200321064127.5846-1-ezequiel@collabora.com> (raw)
The Media subsystem has a set of configuration options
that control the visibility of other options, the
latter group associated to device driver enablement.
In other words, it currently has two levels:
"support" options and "driver enablement" options.
The "support" configuration options currently are:
* Analog TV support
* Digital TV support
* Camera and grabbers support
* AM/FM radio support
* HDMI CEC support
* SDR support
The "device driver enablement" options are:
* USB devices
* PCI devices
* Platform-specific devices
* Memory-to-memory devices
* DVB devices
* CEC devices
* SDR devices
* ...
In order to simplify the above, refactor the media configuration,
mostly by dropping the "support" options, which don't seem to
be really required.
In other words, the following are removed: MEDIA_ANALOG_TV_SUPPORT,
MEDIA_DIGITAL_TV_SUPPORT, MEDIA_CAMERA_SUPPORT, MEDIA_RADIO_SUPPORT,
MEDIA_CEC_SUPPORT and MEDIA_SDR_SUPPORT.
As a result, the configuration is now simplified. Users
will find USB capture devices under "Media USB Adapters",
or CEC adapters under "CEC platform devices", without
the need to enable any other "support" options.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
drivers/media/Kconfig | 61 ----------------------------
drivers/media/dvb-frontends/Kconfig | 2 +-
drivers/media/i2c/Kconfig | 14 +------
drivers/media/i2c/m5mols/Kconfig | 1 -
drivers/media/i2c/smiapp/Kconfig | 1 -
drivers/media/mc/Kconfig | 1 -
drivers/media/pci/Kconfig | 18 ++------
drivers/media/pci/bt8xx/Kconfig | 1 -
drivers/media/platform/Kconfig | 7 ----
drivers/media/radio/Kconfig | 1 -
drivers/media/tuners/Kconfig | 8 ++--
drivers/media/usb/Kconfig | 29 ++++---------
drivers/media/usb/dvb-usb-v2/Kconfig | 2 +-
drivers/media/usb/em28xx/Kconfig | 4 +-
drivers/media/usb/go7007/Kconfig | 2 +-
sound/pci/Kconfig | 2 -
16 files changed, 20 insertions(+), 134 deletions(-)
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 9dfea5c4b6ab..fcbf265a92cd 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -30,63 +30,6 @@ comment "Multimedia core support"
#
# Multimedia support - automatically enable V4L2 and DVB core
#
-config MEDIA_CAMERA_SUPPORT
- bool "Cameras/video grabbers support"
- help
- Enable support for webcams and video grabbers.
-
- Say Y when you have a webcam or a video capture grabber board.
-
-config MEDIA_ANALOG_TV_SUPPORT
- bool "Analog TV support"
- help
- Enable analog TV support.
-
- Say Y when you have a TV board with analog support or with a
- hybrid analog/digital TV chipset.
-
- Note: There are several DVB cards that are based on chips that
- support both analog and digital TV. Disabling this option
- will disable support for them.
-
-config MEDIA_DIGITAL_TV_SUPPORT
- bool "Digital TV support"
- help
- Enable digital TV support.
-
- Say Y when you have a board with digital support or a board with
- hybrid digital TV and analog TV.
-
-config MEDIA_RADIO_SUPPORT
- bool "AM/FM radio receivers/transmitters support"
- help
- Enable AM/FM radio support.
-
- Additional info and docs are available on the web at
- <https://linuxtv.org>
-
- Say Y when you have a board with radio support.
-
- Note: There are several TV cards that are based on chips that
- support radio reception. Disabling this option will
- disable support for them.
-
-config MEDIA_SDR_SUPPORT
- bool "Software defined radio support"
- help
- Enable software defined radio support.
-
- Say Y when you have a software defined radio device.
-
-config MEDIA_CEC_SUPPORT
- bool "HDMI CEC support"
- help
- Enable support for HDMI CEC (Consumer Electronics Control),
- which is an optional HDMI feature.
-
- Say Y when you have an HDMI receiver, transmitter or a USB CEC
- adapter that supports HDMI CEC.
-
source "drivers/media/cec/Kconfig"
source "drivers/media/mc/Kconfig"
@@ -99,7 +42,6 @@ source "drivers/media/mc/Kconfig"
config VIDEO_DEV
tristate
depends on MEDIA_SUPPORT
- depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
default y
config VIDEO_V4L2_SUBDEV_API
@@ -121,7 +63,6 @@ source "drivers/media/v4l2-core/Kconfig"
config DVB_CORE
tristate
depends on MEDIA_SUPPORT
- depends on MEDIA_DIGITAL_TV_SUPPORT
depends on (I2C || I2C=n)
default y
select CRC32
@@ -186,7 +127,6 @@ comment "Media ancillary drivers (tuners, sensors, i2c, spi, frontends)"
config MEDIA_SUBDRV_AUTOSELECT
bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT || MEDIA_SDR_SUPPORT
depends on HAS_IOMEM
select I2C
select I2C_MUX
@@ -214,7 +154,6 @@ config MEDIA_HIDE_ANCILLARY_SUBDRV
config MEDIA_ATTACH
bool
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
depends on MODULES
default MODULES
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index a29e9ddf9c82..832f66b91459 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -518,7 +518,7 @@ config DVB_RTL2832
config DVB_RTL2832_SDR
tristate "Realtek RTL2832 SDR"
- depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && MEDIA_SDR_SUPPORT && USB
+ depends on DVB_CORE && I2C && I2C_MUX && VIDEO_V4L2 && USB
select DVB_RTL2832
select VIDEOBUF2_VMALLOC
default m if !MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 125d596c13dd..92e51c288321 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -568,8 +568,6 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
-if MEDIA_CAMERA_SUPPORT
-
config VIDEO_HI556
tristate "Hynix Hi-556 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
@@ -1007,12 +1005,9 @@ config VIDEO_S5C73M3
help
This is a V4L2 sensor driver for Samsung S5C73M3
8 Mpixel camera.
-endif
comment "Lens drivers"
-if MEDIA_CAMERA_SUPPORT
-
config VIDEO_AD5820
tristate "AD5820 lens voice coil support"
depends on GPIOLIB && I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
@@ -1050,12 +1045,8 @@ config VIDEO_DW9807_VCM
capability. This is designed for linear control of
voice coil motors, controlled via I2C serial interface.
-endif
-
comment "Flash devices"
-if MEDIA_CAMERA_SUPPORT
-
config VIDEO_ADP1653
tristate "ADP1653 flash support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
@@ -1079,8 +1070,6 @@ config VIDEO_LM3646
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
-endif
-
comment "Video improvement chips"
config VIDEO_UPD64031A
@@ -1123,7 +1112,7 @@ comment "SDR tuner chips"
config SDR_MAX2175
tristate "Maxim 2175 RF to Bits tuner"
- depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
+ depends on VIDEO_V4L2 && I2C
select REGMAP_I2C
help
Support for Maxim 2175 tuner. It is an advanced analog/digital
@@ -1169,7 +1158,6 @@ config VIDEO_I2C
config VIDEO_ST_MIPID02
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
select V4L2_FWNODE
help
Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
index e573482f269f..91c0dafc7668 100644
--- a/drivers/media/i2c/m5mols/Kconfig
+++ b/drivers/media/i2c/m5mols/Kconfig
@@ -2,6 +2,5 @@
config VIDEO_M5MOLS
tristate "Fujitsu M-5MOLS 8MP sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
help
This driver supports Fujitsu M-5MOLS camera sensor with ISP
diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig
index fcaa7f9494a8..a2f5775dfcac 100644
--- a/drivers/media/i2c/smiapp/Kconfig
+++ b/drivers/media/i2c/smiapp/Kconfig
@@ -2,7 +2,6 @@
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
- depends on MEDIA_CAMERA_SUPPORT
select VIDEO_SMIAPP_PLL
select V4L2_FWNODE
help
diff --git a/drivers/media/mc/Kconfig b/drivers/media/mc/Kconfig
index 3b9795cfcb36..9382e35211ca 100644
--- a/drivers/media/mc/Kconfig
+++ b/drivers/media/mc/Kconfig
@@ -5,7 +5,6 @@
config MEDIA_CONTROLLER
bool "Media Controller API"
- depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
help
Enable the media controller API used to query media devices internal
topology and configure it dynamically.
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index dcb3719f440e..3d2cc135acd6 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -9,25 +9,20 @@ menuconfig MEDIA_PCI_SUPPORT
if MEDIA_PCI_SUPPORT
-if MEDIA_CAMERA_SUPPORT
- comment "Media capture support"
+comment "Media capture support"
source "drivers/media/pci/meye/Kconfig"
source "drivers/media/pci/solo6x10/Kconfig"
source "drivers/media/pci/sta2x11/Kconfig"
source "drivers/media/pci/tw5864/Kconfig"
source "drivers/media/pci/tw68/Kconfig"
source "drivers/media/pci/tw686x/Kconfig"
-endif
-if MEDIA_ANALOG_TV_SUPPORT
- comment "Media capture/analog TV support"
+comment "Media capture/analog TV support"
source "drivers/media/pci/ivtv/Kconfig"
source "drivers/media/pci/saa7146/Kconfig"
source "drivers/media/pci/dt3155/Kconfig"
-endif
-if MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
- comment "Media capture/analog/hybrid TV support"
+comment "Media capture/analog/hybrid TV support"
source "drivers/media/pci/cx18/Kconfig"
source "drivers/media/pci/cx23885/Kconfig"
source "drivers/media/pci/cx25821/Kconfig"
@@ -37,10 +32,7 @@ source "drivers/media/pci/saa7134/Kconfig"
source "drivers/media/pci/saa7164/Kconfig"
source "drivers/media/pci/cobalt/Kconfig"
-endif
-
-if MEDIA_DIGITAL_TV_SUPPORT
- comment "Media digital TV PCI Adapters"
+comment "Media digital TV PCI Adapters"
source "drivers/media/pci/ttpci/Kconfig"
source "drivers/media/pci/b2c2/Kconfig"
source "drivers/media/pci/pluto2/Kconfig"
@@ -52,8 +44,6 @@ source "drivers/media/pci/ngene/Kconfig"
source "drivers/media/pci/ddbridge/Kconfig"
source "drivers/media/pci/smipcie/Kconfig"
source "drivers/media/pci/netup_unidvb/Kconfig"
-endif
-
source "drivers/media/pci/intel/ipu3/Kconfig"
endif #MEDIA_PCI_SUPPORT
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
index 75d172a6f54c..a4522c35d606 100644
--- a/drivers/media/pci/bt8xx/Kconfig
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -5,7 +5,6 @@ config VIDEO_BT848
select I2C_ALGOBIT
select VIDEOBUF_DMA_SG
depends on RC_CORE
- depends on MEDIA_RADIO_SUPPORT
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index e01bbb9dd1c1..6d48338e8100 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -5,7 +5,6 @@
menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
- depends on MEDIA_CAMERA_SUPPORT
help
Say Y here to enable support for platform-specific V4L drivers.
@@ -43,7 +42,6 @@ config VIDEO_ASPEED
config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
- depends on MEDIA_CAMERA_SUPPORT
depends on VIDEO_DEV && I2C
depends on ARCH_SHMOBILE || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
@@ -165,7 +163,6 @@ endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
@@ -534,7 +531,6 @@ config VIDEO_TI_CSC
menuconfig V4L_TEST_DRIVERS
bool "Media test drivers"
- depends on MEDIA_CAMERA_SUPPORT
if V4L_TEST_DRIVERS
@@ -557,7 +553,6 @@ endif #V4L_TEST_DRIVERS
menuconfig DVB_PLATFORM_DRIVERS
bool "DVB platform devices"
- depends on MEDIA_DIGITAL_TV_SUPPORT
help
Say Y here to enable support for platform-specific Digital TV drivers.
@@ -567,7 +562,6 @@ endif #DVB_PLATFORM_DRIVERS
menuconfig CEC_PLATFORM_DRIVERS
bool "CEC platform devices"
- depends on MEDIA_CEC_SUPPORT
if CEC_PLATFORM_DRIVERS
@@ -692,7 +686,6 @@ endif #CEC_PLATFORM_DRIVERS
menuconfig SDR_PLATFORM_DRIVERS
bool "SDR platform devices"
- depends on MEDIA_SDR_SUPPORT
help
Say Y here to enable support for platform-specific SDR Drivers.
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index eb79d99787bd..e19ba6ab6e48 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -6,7 +6,6 @@
menuconfig RADIO_ADAPTERS
bool "Radio Adapters"
depends on VIDEO_V4L2
- depends on MEDIA_RADIO_SUPPORT
default y
help
Say Y here to enable selecting AM/FM radio adapters.
diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
index e104bb7766e1..7af7ff174eea 100644
--- a/drivers/media/tuners/Kconfig
+++ b/drivers/media/tuners/Kconfig
@@ -2,26 +2,24 @@
# Analog TV tuners, auto-loaded via tuner.ko
config MEDIA_TUNER
tristate
- depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT) && I2C
+ depends on I2C
default y
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
- select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
+ select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT
comment "Tuner drivers hidden by 'Autoselect ancillary drivers'"
depends on MEDIA_HIDE_ANCILLARY_SUBDRV
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
menu "Customize TV tuners"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
config MEDIA_TUNER_SIMPLE
tristate "Simple tuner support"
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index e678d3d11467..72c88b1add55 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -9,8 +9,7 @@ menuconfig MEDIA_USB_SUPPORT
if MEDIA_USB_SUPPORT
-if MEDIA_CAMERA_SUPPORT
- comment "Webcam devices"
+comment "Webcam devices"
source "drivers/media/usb/uvc/Kconfig"
source "drivers/media/usb/gspca/Kconfig"
source "drivers/media/usb/pwc/Kconfig"
@@ -19,26 +18,19 @@ source "drivers/media/usb/zr364xx/Kconfig"
source "drivers/media/usb/stkwebcam/Kconfig"
source "drivers/media/usb/s2255/Kconfig"
source "drivers/media/usb/usbtv/Kconfig"
-endif
-if MEDIA_ANALOG_TV_SUPPORT
- comment "Analog TV USB devices"
+comment "Analog TV USB devices"
source "drivers/media/usb/pvrusb2/Kconfig"
source "drivers/media/usb/hdpvr/Kconfig"
source "drivers/media/usb/stk1160/Kconfig"
source "drivers/media/usb/go7007/Kconfig"
-endif
-if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
- comment "Analog/digital TV USB devices"
+comment "Analog/digital TV USB devices"
source "drivers/media/usb/au0828/Kconfig"
source "drivers/media/usb/cx231xx/Kconfig"
source "drivers/media/usb/tm6000/Kconfig"
-endif
-
-if I2C && MEDIA_DIGITAL_TV_SUPPORT
- comment "Digital TV USB devices"
+comment "Digital TV USB devices"
source "drivers/media/usb/dvb-usb/Kconfig"
source "drivers/media/usb/dvb-usb-v2/Kconfig"
source "drivers/media/usb/ttusb-budget/Kconfig"
@@ -46,25 +38,18 @@ source "drivers/media/usb/ttusb-dec/Kconfig"
source "drivers/media/usb/siano/Kconfig"
source "drivers/media/usb/b2c2/Kconfig"
source "drivers/media/usb/as102/Kconfig"
-endif
-if (MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
- comment "Webcam, TV (analog/digital) USB devices"
+comment "Webcam, TV (analog/digital) USB devices"
source "drivers/media/usb/em28xx/Kconfig"
-endif
-if MEDIA_SDR_SUPPORT
- comment "Software defined radio USB devices"
+comment "Software defined radio USB devices"
source "drivers/media/usb/airspy/Kconfig"
source "drivers/media/usb/hackrf/Kconfig"
source "drivers/media/usb/msi2500/Kconfig"
-endif
-if MEDIA_CEC_SUPPORT
- comment "USB HDMI CEC adapters"
+comment "USB HDMI CEC adapters"
source "drivers/media/usb/pulse8-cec/Kconfig"
source "drivers/media/usb/rainshadow-cec/Kconfig"
-endif
endif #MEDIA_USB_SUPPORT
endif #USB
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index b21a4d413872..8ebda4361b65 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -137,7 +137,7 @@ config DVB_USB_RTL28XXU
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
select DVB_RTL2830
select DVB_RTL2832
- select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
+ select DVB_RTL2832_SDR if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_FC0012 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index f2031a933e54..7031d6e80304 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -12,8 +12,8 @@ config VIDEO_EM28XX_V4L2
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
- select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
+ select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT
+ select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT
help
This is a video4linux driver for Empia 28xx based TV cards.
diff --git a/drivers/media/usb/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig
index 4ff79940ad8d..533e95375082 100644
--- a/drivers/media/usb/go7007/Kconfig
+++ b/drivers/media/usb/go7007/Kconfig
@@ -12,7 +12,7 @@ config VIDEO_GO7007
select VIDEO_TW2804 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TW9903 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
- select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT
+ select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
help
This is a video4linux driver for the WIS GO7007 MPEG
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 93bc9bef7641..e68af4112505 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -557,7 +557,6 @@ config SND_ES1968_INPUT
config SND_ES1968_RADIO
bool "Enable TEA5757 radio tuner support for es1968"
depends on SND_ES1968
- depends on MEDIA_RADIO_SUPPORT
depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_ES1968
select RADIO_ADAPTERS
select RADIO_TEA575X
@@ -581,7 +580,6 @@ config SND_FM801
config SND_FM801_TEA575X_BOOL
bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- depends on MEDIA_RADIO_SUPPORT
depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
select RADIO_ADAPTERS
select RADIO_TEA575X
--
2.26.0.rc2
next reply other threads:[~2020-03-21 6:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 6:41 Ezequiel Garcia [this message]
2020-03-21 10:35 ` [PATCH] media: Refactor configuration options Mauro Carvalho Chehab
2020-03-21 12:39 ` Ezequiel Garcia
2020-03-21 13:51 ` Mauro Carvalho Chehab
2020-03-23 13:52 ` Helen Koike
2020-03-23 14:13 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200321064127.5846-1-ezequiel@collabora.com \
--to=ezequiel@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=kernel@collabora.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mkrufky@gmail.com \
--cc=nicolas@ndufresne.ca \
--cc=p.zabel@pengutronix.de \
--cc=sakari.ailus@iki.fi \
--cc=sean@mess.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).