From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Mackerras <paulus@ozlabs.org>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Janosch Frank <frankja@linux.ibm.com>,
David Hildenbrand <david@redhat.com>,
Cornelia Huck <cohuck@redhat.com>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
Marc Zyngier <maz@kernel.org>, James Morse <james.morse@arm.com>,
Julien Thierry <julien.thierry.kdev@gmail.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
linux-mips@vger.kernel.org, kvm@vger.kernel.org,
kvm-ppc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/9] KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
Date: Sat, 21 Mar 2020 13:25:57 -0700 [thread overview]
Message-ID: <20200321202603.19355-4-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200321202603.19355-1-sean.j.christopherson@intel.com>
Move VMX's hardware_setup() below its vmx_x86_ops definition so that a
future patch can refactor hardware_setup() to modify vmx_x86_ops
directly instead of indirectly modifying the ops via the global
kvm_x86_ops.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/kvm/vmx/vmx.c | 346 ++++++++++++++++++++---------------------
1 file changed, 173 insertions(+), 173 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index ffcdcc86f5b7..82dab775d520 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7652,179 +7652,6 @@ static bool vmx_apic_init_signal_blocked(struct kvm_vcpu *vcpu)
return to_vmx(vcpu)->nested.vmxon;
}
-static __init int hardware_setup(void)
-{
- unsigned long host_bndcfgs;
- struct desc_ptr dt;
- int r, i, ept_lpage_level;
-
- store_idt(&dt);
- host_idt_base = dt.address;
-
- for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i)
- kvm_define_shared_msr(i, vmx_msr_index[i]);
-
- if (setup_vmcs_config(&vmcs_config, &vmx_capability) < 0)
- return -EIO;
-
- if (boot_cpu_has(X86_FEATURE_NX))
- kvm_enable_efer_bits(EFER_NX);
-
- if (boot_cpu_has(X86_FEATURE_MPX)) {
- rdmsrl(MSR_IA32_BNDCFGS, host_bndcfgs);
- WARN_ONCE(host_bndcfgs, "KVM: BNDCFGS in host will be lost");
- }
-
- if (!cpu_has_vmx_mpx())
- supported_xcr0 &= ~(XFEATURE_MASK_BNDREGS |
- XFEATURE_MASK_BNDCSR);
-
- if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
- !(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
- enable_vpid = 0;
-
- if (!cpu_has_vmx_ept() ||
- !cpu_has_vmx_ept_4levels() ||
- !cpu_has_vmx_ept_mt_wb() ||
- !cpu_has_vmx_invept_global())
- enable_ept = 0;
-
- if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
- enable_ept_ad_bits = 0;
-
- if (!cpu_has_vmx_unrestricted_guest() || !enable_ept)
- enable_unrestricted_guest = 0;
-
- if (!cpu_has_vmx_flexpriority())
- flexpriority_enabled = 0;
-
- if (!cpu_has_virtual_nmis())
- enable_vnmi = 0;
-
- /*
- * set_apic_access_page_addr() is used to reload apic access
- * page upon invalidation. No need to do anything if not
- * using the APIC_ACCESS_ADDR VMCS field.
- */
- if (!flexpriority_enabled)
- kvm_x86_ops->set_apic_access_page_addr = NULL;
-
- if (!cpu_has_vmx_tpr_shadow())
- kvm_x86_ops->update_cr8_intercept = NULL;
-
-#if IS_ENABLED(CONFIG_HYPERV)
- if (ms_hyperv.nested_features & HV_X64_NESTED_GUEST_MAPPING_FLUSH
- && enable_ept) {
- kvm_x86_ops->tlb_remote_flush = hv_remote_flush_tlb;
- kvm_x86_ops->tlb_remote_flush_with_range =
- hv_remote_flush_tlb_with_range;
- }
-#endif
-
- if (!cpu_has_vmx_ple()) {
- ple_gap = 0;
- ple_window = 0;
- ple_window_grow = 0;
- ple_window_max = 0;
- ple_window_shrink = 0;
- }
-
- if (!cpu_has_vmx_apicv()) {
- enable_apicv = 0;
- kvm_x86_ops->sync_pir_to_irr = NULL;
- }
-
- if (cpu_has_vmx_tsc_scaling()) {
- kvm_has_tsc_control = true;
- kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX;
- kvm_tsc_scaling_ratio_frac_bits = 48;
- }
-
- set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
-
- if (enable_ept)
- vmx_enable_tdp();
-
- if (!enable_ept)
- ept_lpage_level = 0;
- else if (cpu_has_vmx_ept_1g_page())
- ept_lpage_level = PT_PDPE_LEVEL;
- else if (cpu_has_vmx_ept_2m_page())
- ept_lpage_level = PT_DIRECTORY_LEVEL;
- else
- ept_lpage_level = PT_PAGE_TABLE_LEVEL;
- kvm_configure_mmu(enable_ept, ept_lpage_level);
-
- /*
- * Only enable PML when hardware supports PML feature, and both EPT
- * and EPT A/D bit features are enabled -- PML depends on them to work.
- */
- if (!enable_ept || !enable_ept_ad_bits || !cpu_has_vmx_pml())
- enable_pml = 0;
-
- if (!enable_pml) {
- kvm_x86_ops->slot_enable_log_dirty = NULL;
- kvm_x86_ops->slot_disable_log_dirty = NULL;
- kvm_x86_ops->flush_log_dirty = NULL;
- kvm_x86_ops->enable_log_dirty_pt_masked = NULL;
- }
-
- if (!cpu_has_vmx_preemption_timer())
- enable_preemption_timer = false;
-
- if (enable_preemption_timer) {
- u64 use_timer_freq = 5000ULL * 1000 * 1000;
- u64 vmx_msr;
-
- rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
- cpu_preemption_timer_multi =
- vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
-
- if (tsc_khz)
- use_timer_freq = (u64)tsc_khz * 1000;
- use_timer_freq >>= cpu_preemption_timer_multi;
-
- /*
- * KVM "disables" the preemption timer by setting it to its max
- * value. Don't use the timer if it might cause spurious exits
- * at a rate faster than 0.1 Hz (of uninterrupted guest time).
- */
- if (use_timer_freq > 0xffffffffu / 10)
- enable_preemption_timer = false;
- }
-
- if (!enable_preemption_timer) {
- kvm_x86_ops->set_hv_timer = NULL;
- kvm_x86_ops->cancel_hv_timer = NULL;
- kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit;
- }
-
- kvm_set_posted_intr_wakeup_handler(wakeup_handler);
-
- kvm_mce_cap_supported |= MCG_LMCE_P;
-
- if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST)
- return -EINVAL;
- if (!enable_ept || !cpu_has_vmx_intel_pt())
- pt_mode = PT_MODE_SYSTEM;
-
- if (nested) {
- nested_vmx_setup_ctls_msrs(&vmcs_config.nested,
- vmx_capability.ept);
-
- r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers);
- if (r)
- return r;
- }
-
- vmx_set_cpu_caps();
-
- r = alloc_kvm_area();
- if (r)
- nested_vmx_hardware_unsetup();
- return r;
-}
-
static __exit void hardware_unsetup(void)
{
if (nested)
@@ -7978,6 +7805,179 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
.apic_init_signal_blocked = vmx_apic_init_signal_blocked,
};
+static __init int hardware_setup(void)
+{
+ unsigned long host_bndcfgs;
+ struct desc_ptr dt;
+ int r, i, ept_lpage_level;
+
+ store_idt(&dt);
+ host_idt_base = dt.address;
+
+ for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i)
+ kvm_define_shared_msr(i, vmx_msr_index[i]);
+
+ if (setup_vmcs_config(&vmcs_config, &vmx_capability) < 0)
+ return -EIO;
+
+ if (boot_cpu_has(X86_FEATURE_NX))
+ kvm_enable_efer_bits(EFER_NX);
+
+ if (boot_cpu_has(X86_FEATURE_MPX)) {
+ rdmsrl(MSR_IA32_BNDCFGS, host_bndcfgs);
+ WARN_ONCE(host_bndcfgs, "KVM: BNDCFGS in host will be lost");
+ }
+
+ if (!cpu_has_vmx_mpx())
+ supported_xcr0 &= ~(XFEATURE_MASK_BNDREGS |
+ XFEATURE_MASK_BNDCSR);
+
+ if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
+ !(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
+ enable_vpid = 0;
+
+ if (!cpu_has_vmx_ept() ||
+ !cpu_has_vmx_ept_4levels() ||
+ !cpu_has_vmx_ept_mt_wb() ||
+ !cpu_has_vmx_invept_global())
+ enable_ept = 0;
+
+ if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
+ enable_ept_ad_bits = 0;
+
+ if (!cpu_has_vmx_unrestricted_guest() || !enable_ept)
+ enable_unrestricted_guest = 0;
+
+ if (!cpu_has_vmx_flexpriority())
+ flexpriority_enabled = 0;
+
+ if (!cpu_has_virtual_nmis())
+ enable_vnmi = 0;
+
+ /*
+ * set_apic_access_page_addr() is used to reload apic access
+ * page upon invalidation. No need to do anything if not
+ * using the APIC_ACCESS_ADDR VMCS field.
+ */
+ if (!flexpriority_enabled)
+ kvm_x86_ops->set_apic_access_page_addr = NULL;
+
+ if (!cpu_has_vmx_tpr_shadow())
+ kvm_x86_ops->update_cr8_intercept = NULL;
+
+#if IS_ENABLED(CONFIG_HYPERV)
+ if (ms_hyperv.nested_features & HV_X64_NESTED_GUEST_MAPPING_FLUSH
+ && enable_ept) {
+ kvm_x86_ops->tlb_remote_flush = hv_remote_flush_tlb;
+ kvm_x86_ops->tlb_remote_flush_with_range =
+ hv_remote_flush_tlb_with_range;
+ }
+#endif
+
+ if (!cpu_has_vmx_ple()) {
+ ple_gap = 0;
+ ple_window = 0;
+ ple_window_grow = 0;
+ ple_window_max = 0;
+ ple_window_shrink = 0;
+ }
+
+ if (!cpu_has_vmx_apicv()) {
+ enable_apicv = 0;
+ kvm_x86_ops->sync_pir_to_irr = NULL;
+ }
+
+ if (cpu_has_vmx_tsc_scaling()) {
+ kvm_has_tsc_control = true;
+ kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX;
+ kvm_tsc_scaling_ratio_frac_bits = 48;
+ }
+
+ set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
+
+ if (enable_ept)
+ vmx_enable_tdp();
+
+ if (!enable_ept)
+ ept_lpage_level = 0;
+ else if (cpu_has_vmx_ept_1g_page())
+ ept_lpage_level = PT_PDPE_LEVEL;
+ else if (cpu_has_vmx_ept_2m_page())
+ ept_lpage_level = PT_DIRECTORY_LEVEL;
+ else
+ ept_lpage_level = PT_PAGE_TABLE_LEVEL;
+ kvm_configure_mmu(enable_ept, ept_lpage_level);
+
+ /*
+ * Only enable PML when hardware supports PML feature, and both EPT
+ * and EPT A/D bit features are enabled -- PML depends on them to work.
+ */
+ if (!enable_ept || !enable_ept_ad_bits || !cpu_has_vmx_pml())
+ enable_pml = 0;
+
+ if (!enable_pml) {
+ kvm_x86_ops->slot_enable_log_dirty = NULL;
+ kvm_x86_ops->slot_disable_log_dirty = NULL;
+ kvm_x86_ops->flush_log_dirty = NULL;
+ kvm_x86_ops->enable_log_dirty_pt_masked = NULL;
+ }
+
+ if (!cpu_has_vmx_preemption_timer())
+ enable_preemption_timer = false;
+
+ if (enable_preemption_timer) {
+ u64 use_timer_freq = 5000ULL * 1000 * 1000;
+ u64 vmx_msr;
+
+ rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
+ cpu_preemption_timer_multi =
+ vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
+
+ if (tsc_khz)
+ use_timer_freq = (u64)tsc_khz * 1000;
+ use_timer_freq >>= cpu_preemption_timer_multi;
+
+ /*
+ * KVM "disables" the preemption timer by setting it to its max
+ * value. Don't use the timer if it might cause spurious exits
+ * at a rate faster than 0.1 Hz (of uninterrupted guest time).
+ */
+ if (use_timer_freq > 0xffffffffu / 10)
+ enable_preemption_timer = false;
+ }
+
+ if (!enable_preemption_timer) {
+ kvm_x86_ops->set_hv_timer = NULL;
+ kvm_x86_ops->cancel_hv_timer = NULL;
+ kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit;
+ }
+
+ kvm_set_posted_intr_wakeup_handler(wakeup_handler);
+
+ kvm_mce_cap_supported |= MCG_LMCE_P;
+
+ if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST)
+ return -EINVAL;
+ if (!enable_ept || !cpu_has_vmx_intel_pt())
+ pt_mode = PT_MODE_SYSTEM;
+
+ if (nested) {
+ nested_vmx_setup_ctls_msrs(&vmcs_config.nested,
+ vmx_capability.ept);
+
+ r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers);
+ if (r)
+ return r;
+ }
+
+ vmx_set_cpu_caps();
+
+ r = alloc_kvm_area();
+ if (r)
+ nested_vmx_hardware_unsetup();
+ return r;
+}
+
static struct kvm_x86_init_ops vmx_init_ops __initdata = {
.cpu_has_kvm_support = cpu_has_kvm_support,
.disabled_by_bios = vmx_disabled_by_bios,
--
2.24.1
next prev parent reply other threads:[~2020-03-21 20:26 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 20:25 [PATCH v3 0/9] KVM: Move x86 init ops to separate struct Sean Christopherson
2020-03-21 20:25 ` [PATCH v3 1/9] KVM: Pass kvm_init()'s opaque param to additional arch funcs Sean Christopherson
2020-03-24 1:18 ` Paul Mackerras
2020-03-21 20:25 ` [PATCH v3 2/9] KVM: x86: Move init-only kvm_x86_ops to separate struct Sean Christopherson
2020-03-23 12:10 ` Vitaly Kuznetsov
2020-03-23 15:29 ` Sean Christopherson
2020-03-23 16:24 ` Vitaly Kuznetsov
2020-03-23 16:31 ` Sean Christopherson
2020-03-23 19:47 ` Paolo Bonzini
2020-03-21 20:25 ` Sean Christopherson [this message]
2020-03-23 12:12 ` [PATCH v3 3/9] KVM: VMX: Move hardware_setup() definition below vmx_x86_ops Vitaly Kuznetsov
2020-03-21 20:25 ` [PATCH v3 4/9] KVM: VMX: Configure runtime hooks using vmx_x86_ops Sean Christopherson
2020-03-23 12:27 ` Vitaly Kuznetsov
2020-03-23 16:23 ` Sean Christopherson
2020-03-23 20:00 ` Paolo Bonzini
2020-03-21 20:25 ` [PATCH v3 5/9] KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes Sean Christopherson
2020-03-21 20:26 ` [PATCH v3 6/9] KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Sean Christopherson
2020-03-23 12:44 ` Vitaly Kuznetsov
2020-03-23 15:38 ` Sean Christopherson
2020-03-21 20:26 ` [PATCH v3 7/9] KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() Sean Christopherson
2020-03-23 12:46 ` Vitaly Kuznetsov
2020-03-21 20:26 ` [PATCH v3 8/9] KVM: VMX: Annotate vmx_x86_ops as __initdata Sean Christopherson
2020-03-23 12:48 ` Vitaly Kuznetsov
2020-03-21 20:26 ` [PATCH v3 9/9] KVM: SVM: Annotate svm_x86_ops " Sean Christopherson
2020-03-23 12:48 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200321202603.19355-4-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=james.morse@arm.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=julien.thierry.kdev@gmail.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=maz@kernel.org \
--cc=paulus@ozlabs.org \
--cc=pbonzini@redhat.com \
--cc=suzuki.poulose@arm.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).