From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Mikko Mutanen" <mikko.mutanen@fi.rohmeurope.com>,
"Markus Laine" <markus.laine@fi.rohmeurope.com>,
"Andrew Morton" <akpm@linux-foundation.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Andy Shevchenko" <andy.shevchenko@gmail.com>,
"Ard Biesheuvel" <ardb@kernel.org>,
"Borislav Petkov" <bp@suse.de>,
"Brendan Higgins" <brendanhiggins@google.com>,
"Changbin Du" <changbin.du@intel.com>,
"Dan Williams" <dan.j.williams@intel.com>,
"David Gow" <davidgow@google.com>,
"David S. Miller" <davem@davemloft.net>,
devicetree@vger.kernel.org, "Gary Hook" <Gary.Hook@amd.com>,
"Herbert Xu" <herbert@gondor.apana.org.au>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
"Mark Rutland" <mark.rutland@arm.com>,
"Masahiro Yamada" <yamada.masahiro@socionext.com>,
"Masami Hiramatsu" <mhiramat@kernel.org>,
"Matti Vaittinen" <matti.vaittinen@fi.rohmeurope.com>,
"Mikhail Zaslonko" <zaslonko@linux.ibm.com>,
"Randy Dunlap" <rdunlap@infradead.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Sebastian Reichel" <sre@kernel.org>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Tal Gilboa" <talgi@mellanox.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Uwe Kleine-König" <uwe@kleine-koenig.org>,
"Vincenzo Frascino" <vincenzo.frascino@arm.com>,
"Vladimir Oltean" <olteanv@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>
Subject: [PATCH v6 02/10] dt_bindings: ROHM BD99954 Charger
Date: Tue, 24 Mar 2020 10:28:12 +0200 [thread overview]
Message-ID: <7a977e37124324a33b202ac6ffaa128b40044076.1584977512.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1584977512.git.matti.vaittinen@fi.rohmeurope.com>
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
secondary battery. Intended to be used in space-constraint equipment such
as Low profile Notebook PC, Tablets and other applications. BD99954
provides a Dual-source Battery Charger, two port BC1.2 detection and a
Battery Monitor.
Document the DT bindings for BD99954
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/power/supply/rohm,bd99954.yaml | 155 ++++++++++++++++++
1 file changed, 155 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 000000000000..7e0f73a898c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ - Markus Laine <markus.laine@fi.rohmeurope.com>
+ - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+ The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+ secondary battery intended to be used in space-constraint equipment such
+ as Low profile Notebook PC, Tablets and other applications. BD99954
+ provides a Dual-source Battery Charger, two port BC1.2 detection and a
+ Battery Monitor.
+
+
+properties:
+ compatible:
+ const: rohm,bd99954
+#
+# The battery charging profile of BD99954.
+#
+# Curve (1) represents charging current.
+# Curve (2) represents battery voltage.
+#
+# The BD99954 data sheet divides charging to three phases.
+# a) Trickle-charge with constant current (8).
+# b) pre-charge with constant current (6)
+# c) fast-charge with:
+# First a constant current (5) phase (CC)
+# Then constant voltage (CV) phase (after the battery voltage has reached
+# target level - until charging current has dropped to termination
+# level (7)
+#
+# V ^ ^ I
+# . .
+# . .
+# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++.
+# . / .
+# . ++++++/++ - - - - - - - - - - - - -.- - (5)
+# . + / + .
+# . + - -- .
+# . + - + .
+# . +.- -: .
+# . .+ +` .
+# . .- + | `/ .
+# . .." + .: .
+# . -" + -- .
+# . (2) ..." + | :- .
+# . ..."" + -: .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+# . + `:. .
+# . + | -: .
+# . + -: .
+# . + .. .
+# . (1) + | "+++- - - -.- - (7)
+# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+# . + -
+# -------------------------------------------------+++++++++-->
+# | | | CC | CV |
+# | --trickle-- | -pre- | ---------fast----------- |
+#
+# The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+# Current used at trickle-charge phase (8 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - precharge-current-microamp:
+# Current used at pre-charge phase (6 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-current-max-microamp
+# Current used at fast charge constant current phase (5 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+# The constant voltage used in fast charging phase (4 in above chart)
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - precharge-upper-limit-microvolt
+# charging mode is changed from trickle charging to pre-charging
+# when battery voltage exceeds this limit voltage (3 in above chart)
+# minimum: 2048000
+# maximum: 19200000
+# multipleOf: 64000
+# - re-charge-voltage-microvolt
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# re-charging is automatically started when battry has been discharging
+# to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+# battery is expected to be faulty if battery voltage exceeds this limit.
+# Charger will then enter to a "battery faulty" -state
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - charge-term-current-microamp
+# minimum: 0
+# maximum: 1024000
+# multipleOf: 64000
+# a charge cycle terminates when the battery voltage is above recharge
+# threshold, and the current is below this setting (7 in above chart)
+# See also Documentation/devicetree/bindings/power/supply/battery.txt
+
+ monitored-battery:
+ description:
+ phandle of battery characteristics devicetree node
+
+ rohm,vsys-regulation-microvolt:
+ description: system specific lower limit for system voltage.
+ minimum: 2560000
+ maximum: 19200000
+ multipleOf: 64000
+
+ rohm,vbus-input-current-limit-microamp:
+ description: system specific VBUS input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+ rohm,vcc-input-current-limit-microamp:
+ description: system specific VCC/VACP input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+required:
+ - compatible
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ charger@9 {
+ compatible = "rohm,bd99954";
+ monitored-battery = <&battery>;
+ reg = <0x9>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 8>;
+ rohm,vsys-regulation-microvolt = <8960000>;
+ rohm,vbus-input-current-limit-microamp = <1472000>;
+ rohm,vcc-input-current-limit-microamp = <1472000>;
+ };
+ };
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
next prev parent reply other threads:[~2020-03-24 8:28 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1584977512.git.matti.vaittinen@fi.rohmeurope.com>
2020-03-24 8:27 ` [PATCH v6 01/10] dt-bindings: battery: add new battery parameters Matti Vaittinen
2020-03-24 8:28 ` Matti Vaittinen [this message]
2020-03-24 8:29 ` [PATCH v6 04/10] lib/test_linear_ranges: add a test for the 'linear_ranges' Matti Vaittinen
2020-03-24 9:14 ` Andy Shevchenko
2020-03-24 9:51 ` Vaittinen, Matti
2020-03-24 8:30 ` [PATCH v6 05/10] power: supply: bd70528: rename linear_range to avoid collision Matti Vaittinen
2020-03-24 8:31 ` [PATCH v6 07/10] power: supply: bd70528: use linear ranges Matti Vaittinen
2020-03-24 8:31 ` [PATCH v6 08/10] power: supply: add battery parameters Matti Vaittinen
2020-03-24 8:32 ` [PATCH v6 09/10] power: supply: Support ROHM bd99954 charger Matti Vaittinen
2020-03-24 9:50 ` Andy Shevchenko
2020-03-24 9:51 ` Andy Shevchenko
2020-03-24 10:30 ` Vaittinen, Matti
2020-03-24 10:35 ` Andy Shevchenko
2020-03-25 11:36 ` Vaittinen, Matti
2020-03-25 12:09 ` andriy.shevchenko
2020-03-25 13:00 ` Vaittinen, Matti
2020-03-25 13:20 ` andriy.shevchenko
2020-03-25 13:21 ` andriy.shevchenko
2020-03-25 13:47 ` Vaittinen, Matti
2020-03-24 10:53 ` Vaittinen, Matti
2020-03-24 11:56 ` andriy.shevchenko
2020-03-25 10:14 ` Vaittinen, Matti
2020-03-25 12:05 ` andriy.shevchenko
2020-03-25 9:47 ` Vaittinen, Matti
2020-03-24 8:32 ` [PATCH v6 10/10] power: supply: Fix Kconfig help text indentiation Matti Vaittinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a977e37124324a33b202ac6ffaa128b40044076.1584977512.git.matti.vaittinen@fi.rohmeurope.com \
--to=matti.vaittinen@fi.rohmeurope.com \
--cc=Gary.Hook@amd.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=ardb@kernel.org \
--cc=bp@suse.de \
--cc=brendanhiggins@google.com \
--cc=broonie@kernel.org \
--cc=changbin.du@intel.com \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=davidgow@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=herbert@gondor.apana.org.au \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=markus.laine@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
--cc=mhiramat@kernel.org \
--cc=mikko.mutanen@fi.rohmeurope.com \
--cc=olteanv@gmail.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=sre@kernel.org \
--cc=talgi@mellanox.com \
--cc=tglx@linutronix.de \
--cc=uwe@kleine-koenig.org \
--cc=vincenzo.frascino@arm.com \
--cc=yamada.masahiro@socionext.com \
--cc=zaslonko@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).