From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kbuild@vger.kernel.org
Cc: clang-built-linux@googlegroups.com,
Geert Uytterhoeven <geert@linux-m68k.org>,
Masahiro Yamada <masahiroy@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v2 1/4] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
Date: Thu, 26 Mar 2020 14:57:15 +0900 [thread overview]
Message-ID: <20200326055719.16755-1-masahiroy@kernel.org> (raw)
As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.
wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.
I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.
Instead, the kernel.org m68k GCC [1] successfully built it.
Allowing a user to pass in CROSS_COMPILE_M68K= is handier.
[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v2:
- New patch
drivers/net/wan/Kconfig | 2 +-
drivers/net/wan/Makefile | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 4530840e15ef..dbc0e3f7a3e2 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -200,7 +200,7 @@ config WANXL_BUILD_FIRMWARE
depends on WANXL && !PREVENT_FIRMWARE_BUILD
help
Allows you to rebuild firmware run by the QUICC processor.
- It requires as68k, ld68k and hexdump programs.
+ It requires m68k toolchains and hexdump programs.
You should never need this option, say N.
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 701f5d2fe3b6..995277c657a1 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,17 +40,17 @@ $(obj)/wanxl.o: $(obj)/wanxlfw.inc
ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
ifeq ($(ARCH),m68k)
- AS68K = $(AS)
- LD68K = $(LD)
+ M68KAS = $(AS)
+ M68KLD = $(LD)
else
- AS68K = as68k
- LD68K = ld68k
+ M68KAS = $(CROSS_COMPILE_M68K)as
+ M68KLD = $(CROSS_COMPILE_M68K)ld
endif
quiet_cmd_build_wanxlfw = BLD FW $@
cmd_build_wanxlfw = \
- $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
- $(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+ $(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+ $(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
--
2.17.1
next reply other threads:[~2020-03-26 5:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 5:57 Masahiro Yamada [this message]
2020-03-26 5:57 ` [PATCH v2 2/4] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 3/4] net: wan: wanxl: refactor the firmware rebuild rule Masahiro Yamada
2020-03-26 5:57 ` [PATCH v2 4/4] kbuild: remove AS variable Masahiro Yamada
2020-03-28 5:51 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200326055719.16755-1-masahiroy@kernel.org \
--to=masahiroy@kernel.org \
--cc=clang-built-linux@googlegroups.com \
--cc=davem@davemloft.net \
--cc=geert@linux-m68k.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).