ARM: bcm2835_defconfig: Enable fixed-regulator
diff mbox series

Message ID 20200326134458.13992-1-nsaenzjulienne@suse.de
State Accepted
Commit 35cdc3fa00ee3aebf1a25f55db8a114cbb612092
Headers show
Series
  • ARM: bcm2835_defconfig: Enable fixed-regulator
Related show

Commit Message

Nicolas Saenz Julienne March 26, 2020, 1:44 p.m. UTC
This regulator is now used to control the SD card's power supply on the
Raspberry Pi 4.

Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm/configs/bcm2835_defconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Nicolas Saenz Julienne March 27, 2020, 11:50 a.m. UTC | #1
On Thu, 2020-03-26 at 14:44 +0100, Nicolas Saenz Julienne wrote:
> This regulator is now used to control the SD card's power supply on the
> Raspberry Pi 4.
> 
> Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Applied for-next.

Regards,
Nicolas

Patch
diff mbox series

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 8e7a3ed2a4df..44ff9cd88d81 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -103,6 +103,7 @@  CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y