From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, Andy Gross <agross@kernel.org>
Cc: devicetree@vger.kernel.org
Subject: [PATCH 2/3] arm64: dts: qcom: msm8996: remove unit name for thermal trip points
Date: Mon, 30 Mar 2020 15:36:27 +0530 [thread overview]
Message-ID: <2c0aa5357c96c3caff8554f9ef3ab9c5a2b8d2f8.1585562459.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1585562459.git.amit.kucheria@linaro.org>
The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
m4m-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
l3-or-venus-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster0-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: thermal-zones:
modemtx-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 28 +++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 7ae082ea14ea8..76a2ef2e01933 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2165,7 +2165,7 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu0_alert0: trip-point@0 {
+ cpu0_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -2186,7 +2186,7 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu1_alert0: trip-point@0 {
+ cpu1_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -2207,7 +2207,7 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu2_alert0: trip-point@0 {
+ cpu2_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -2228,7 +2228,7 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu3_alert0: trip-point@0 {
+ cpu3_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
@@ -2249,7 +2249,7 @@
thermal-sensors = <&tsens1 6>;
trips {
- gpu1_alert0: trip-point@0 {
+ gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2264,7 +2264,7 @@
thermal-sensors = <&tsens1 7>;
trips {
- gpu2_alert0: trip-point@0 {
+ gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2279,7 +2279,7 @@
thermal-sensors = <&tsens0 1>;
trips {
- m4m_alert0: trip-point@0 {
+ m4m_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2294,7 +2294,7 @@
thermal-sensors = <&tsens0 2>;
trips {
- l3_or_venus_alert0: trip-point@0 {
+ l3_or_venus_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2309,7 +2309,7 @@
thermal-sensors = <&tsens0 7>;
trips {
- cluster0_l2_alert0: trip-point@0 {
+ cluster0_l2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2324,7 +2324,7 @@
thermal-sensors = <&tsens0 12>;
trips {
- cluster1_l2_alert0: trip-point@0 {
+ cluster1_l2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2339,7 +2339,7 @@
thermal-sensors = <&tsens1 1>;
trips {
- camera_alert0: trip-point@0 {
+ camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2354,7 +2354,7 @@
thermal-sensors = <&tsens1 2>;
trips {
- q6_dsp_alert0: trip-point@0 {
+ q6_dsp_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2369,7 +2369,7 @@
thermal-sensors = <&tsens1 3>;
trips {
- mem_alert0: trip-point@0 {
+ mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
@@ -2384,7 +2384,7 @@
thermal-sensors = <&tsens1 4>;
trips {
- modemtx_alert0: trip-point@0 {
+ modemtx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
--
2.20.1
next prev parent reply other threads:[~2020-03-30 10:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 10:06 [PATCH 0/3] make dtbs_check cleanups for qcom thermal Amit Kucheria
2020-03-30 10:06 ` [PATCH 1/3] arm64: dts: qcom: msm8916: remove unit name for thermal trip points Amit Kucheria
2020-03-30 10:06 ` Amit Kucheria [this message]
2020-03-30 10:06 ` [PATCH 3/3] arm64: dts: qcom: msm8998: " Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c0aa5357c96c3caff8554f9ef3ab9c5a2b8d2f8.1585562459.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).