linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] rtc: sun6i: let the core handle rtc range
Date: Mon, 30 Mar 2020 22:12:25 +0200	[thread overview]
Message-ID: <20200330201226.860967-1-alexandre.belloni@bootlin.com> (raw)

Let the rtc core check the date/time against the RTC range.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-sun6i.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index 415a20a936e4..446ce38c1592 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -108,7 +108,6 @@
  * driver, even though it is somewhat limited.
  */
 #define SUN6I_YEAR_MIN				1970
-#define SUN6I_YEAR_MAX				2033
 #define SUN6I_YEAR_OFF				(SUN6I_YEAR_MIN - 1900)
 
 /*
@@ -569,14 +568,6 @@ static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
 	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
 	u32 date = 0;
 	u32 time = 0;
-	int year;
-
-	year = rtc_tm->tm_year + 1900;
-	if (year < SUN6I_YEAR_MIN || year > SUN6I_YEAR_MAX) {
-		dev_err(dev, "rtc only supports year in range %d - %d\n",
-			SUN6I_YEAR_MIN, SUN6I_YEAR_MAX);
-		return -EINVAL;
-	}
 
 	rtc_tm->tm_year -= SUN6I_YEAR_OFF;
 	rtc_tm->tm_mon += 1;
@@ -585,7 +576,7 @@ static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
 		SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
 		SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
 
-	if (is_leap_year(year))
+	if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
 		date |= SUN6I_LEAP_SET_VALUE(1);
 
 	time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
@@ -726,12 +717,16 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
-					     &sun6i_rtc_ops, THIS_MODULE);
-	if (IS_ERR(chip->rtc)) {
-		dev_err(&pdev->dev, "unable to register device\n");
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
 		return PTR_ERR(chip->rtc);
-	}
+
+	chip->rtc->ops = &sun6i_rtc_ops;
+	chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */
+
+	ret = rtc_register_device(chip->rtc);
+	if (ret)
+		return ret;
 
 	dev_info(&pdev->dev, "RTC enabled\n");
 
-- 
2.25.1


             reply	other threads:[~2020-03-30 20:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-30 20:12 Alexandre Belloni [this message]
2020-03-30 20:12 ` [PATCH 2/2] rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64 Alexandre Belloni
2020-04-02 13:57 ` [PATCH 1/2] rtc: sun6i: let the core handle rtc range Paul Kocialkowski
2020-03-30 20:15 [PATCH] rtc: remove rtc_time_to_tm and rtc_tm_to_time Alexandre Belloni
2020-03-30 20:15 ` [PATCH 1/2] rtc: sun6i: let the core handle rtc range Alexandre Belloni
2020-03-30 20:19   ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200330201226.860967-1-alexandre.belloni@bootlin.com \
    --to=alexandre.belloni@bootlin.com \
    --cc=a.zummo@towertech.it \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).