linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Kevin Tian <kevin.tian@intel.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	Sean Christopherson <sean.j.christopherson@intel.com>,
	Christophe de Dinechin <dinechin@redhat.com>,
	Yan Zhao <yan.y.zhao@intel.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com
Subject: [PATCH v8 06/14] KVM: Make dirty ring exclusive to dirty bitmap log
Date: Tue, 31 Mar 2020 14:59:52 -0400	[thread overview]
Message-ID: <20200331190000.659614-7-peterx@redhat.com> (raw)
In-Reply-To: <20200331190000.659614-1-peterx@redhat.com>

There's no good reason to use both the dirty bitmap logging and the
new dirty ring buffer to track dirty bits.  We should be able to even
support both of them at the same time, but it could complicate things
which could actually help little.  Let's simply make it the rule
before we enable dirty ring on any arch, that we don't allow these two
interfaces to be used together.

The big world switch would be KVM_CAP_DIRTY_LOG_RING capability
enablement.  That's where we'll switch from the default dirty logging
way to the dirty ring way.  As long as kvm->dirty_ring_size is setup
correctly, we'll once and for all switch to the dirty ring buffer mode
for the current virtual machine.

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 Documentation/virt/kvm/api.rst |  7 +++++++
 virt/kvm/kvm_main.c            | 12 ++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index aa54a34077b7..d56f86ba05a0 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -6225,3 +6225,10 @@ make sure all the existing dirty gfns are flushed to the dirty rings.
 
 The dirty ring can gets full.  When it happens, the KVM_RUN of the
 vcpu will return with exit reason KVM_EXIT_DIRTY_LOG_FULL.
+
+NOTE: the capability KVM_CAP_DIRTY_LOG_RING and the corresponding
+ioctl KVM_RESET_DIRTY_RINGS are mutual exclusive to the existing ioctl
+KVM_GET_DIRTY_LOG.  After enabling KVM_CAP_DIRTY_LOG_RING with an
+acceptable dirty ring size, the virtual machine will switch to the
+dirty ring tracking mode.  Further ioctls to either KVM_GET_DIRTY_LOG
+or KVM_CLEAR_DIRTY_LOG will fail.
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index eacdedf8d122..1a4cc20c5a3c 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1355,6 +1355,10 @@ int kvm_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log,
 	unsigned long n;
 	unsigned long any = 0;
 
+	/* Dirty ring tracking is exclusive to dirty log tracking */
+	if (kvm->dirty_ring_size)
+		return -EINVAL;
+
 	*memslot = NULL;
 	*is_dirty = 0;
 
@@ -1416,6 +1420,10 @@ static int kvm_get_dirty_log_protect(struct kvm *kvm, struct kvm_dirty_log *log)
 	unsigned long *dirty_bitmap_buffer;
 	bool flush;
 
+	/* Dirty ring tracking is exclusive to dirty log tracking */
+	if (kvm->dirty_ring_size)
+		return -EINVAL;
+
 	as_id = log->slot >> 16;
 	id = (u16)log->slot;
 	if (as_id >= KVM_ADDRESS_SPACE_NUM || id >= KVM_USER_MEM_SLOTS)
@@ -1524,6 +1532,10 @@ static int kvm_clear_dirty_log_protect(struct kvm *kvm,
 	unsigned long *dirty_bitmap_buffer;
 	bool flush;
 
+	/* Dirty ring tracking is exclusive to dirty log tracking */
+	if (kvm->dirty_ring_size)
+		return -EINVAL;
+
 	as_id = log->slot >> 16;
 	id = (u16)log->slot;
 	if (as_id >= KVM_ADDRESS_SPACE_NUM || id >= KVM_USER_MEM_SLOTS)
-- 
2.24.1


  parent reply	other threads:[~2020-03-31 19:00 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-31 18:59 [PATCH v8 00/14] KVM: Dirty ring interface Peter Xu
2020-03-31 18:59 ` [PATCH v8 01/14] KVM: X86: Change parameter for fast_page_fault tracepoint Peter Xu
2020-03-31 18:59 ` [PATCH v8 02/14] KVM: Cache as_id in kvm_memory_slot Peter Xu
2020-03-31 18:59 ` [PATCH v8 03/14] KVM: X86: Don't track dirty for KVM_SET_[TSS_ADDR|IDENTITY_MAP_ADDR] Peter Xu
2020-04-23 20:39   ` Sean Christopherson
2020-04-24 15:21     ` Peter Xu
2020-04-27 18:10       ` Sean Christopherson
2020-04-28 20:22         ` Peter Xu
2020-03-31 18:59 ` [PATCH v8 04/14] KVM: Pass in kvm pointer into mark_page_dirty_in_slot() Peter Xu
2020-03-31 18:59 ` [PATCH v8 05/14] KVM: X86: Implement ring-based dirty memory tracking Peter Xu
2020-03-31 18:59 ` Peter Xu [this message]
2020-03-31 18:59 ` [PATCH v8 07/14] KVM: Don't allocate dirty bitmap if dirty ring is enabled Peter Xu
2020-03-31 18:59 ` [PATCH v8 08/14] KVM: selftests: Always clear dirty bitmap after iteration Peter Xu
2020-04-01  7:04   ` Andrew Jones
2020-03-31 18:59 ` [PATCH v8 09/14] KVM: selftests: Sync uapi/linux/kvm.h to tools/ Peter Xu
2020-03-31 18:59 ` [PATCH v8 10/14] KVM: selftests: Use a single binary for dirty/clear log test Peter Xu
2020-03-31 18:59 ` [PATCH v8 11/14] KVM: selftests: Introduce after_vcpu_run hook for dirty " Peter Xu
2020-04-01  7:03   ` Andrew Jones
2020-04-01 23:24     ` Peter Xu
2020-03-31 18:59 ` [PATCH v8 12/14] KVM: selftests: Add dirty ring buffer test Peter Xu
2020-03-31 18:59 ` [PATCH v8 13/14] KVM: selftests: Let dirty_log_test async for dirty ring test Peter Xu
2020-04-01  7:48   ` Andrew Jones
2020-03-31 19:00 ` [PATCH v8 14/14] KVM: selftests: Add "-c" parameter to dirty log test Peter Xu
2020-04-22 18:51 ` [PATCH v8 00/14] KVM: Dirty ring interface Peter Xu
2020-04-23  6:28   ` Tian, Kevin
2020-04-23 15:22     ` Peter Xu
2020-04-24  6:01       ` Tian, Kevin
2020-04-24 14:19         ` Peter Xu
2020-04-26 10:29           ` Tian, Kevin
2020-04-27 14:27             ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200331190000.659614-7-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=dinechin@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=vkuznets@redhat.com \
    --cc=yan.y.zhao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).