linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Support Opensource <support.opensource@diasemi.com>
Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/3] watchdog: da9062: Initialize timeout during probe
Date: Fri, 3 Apr 2020 15:07:26 +0200	[thread overview]
Message-ID: <20200403130728.39260-1-s.riedmueller@phytec.de> (raw)

During probe try to set the timeout from device tree and fall back to
either the pre-configured timeout set by e.g. the bootloader in case the
watchdog is already running or the default value.

If the watchdog is already running make sure to update the timeout and
tell the framework about the running state to make sure the watchdog is
handled correctly until user space takes over. Updating the timeout also
removes the need for an additional manual ping so we can remove that as
well.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
Changes in v2:
 - Reworked the patch to use the pre-configured timeout instead of the default
   value as a fallback in case no DT value is present.
 - To achieve the previous point watchdog_init_timeout was added to get the
   DT value if present.
 - Added a timeout update if the watchdog is running to set the desired
   timeout and in this instance removed the manual ping at the end.
 - Removed info message.
---
 drivers/watchdog/da9062_wdt.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index 0ad15d55071c..10b37dd65bed 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -35,6 +35,15 @@ struct da9062_watchdog {
 	bool use_sw_pm;
 };
 
+static unsigned int da9062_wdt_read_timeout(struct da9062_watchdog *wdt)
+{
+	unsigned int val;
+
+	regmap_read(wdt->hw->regmap, DA9062AA_CONTROL_D, &val);
+
+	return wdt_timeout[val & DA9062AA_TWDSCALE_MASK];
+}
+
 static unsigned int da9062_wdt_timeout_to_sel(unsigned int secs)
 {
 	unsigned int i;
@@ -183,7 +192,7 @@ MODULE_DEVICE_TABLE(of, da9062_compatible_id_table);
 static int da9062_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	int ret;
+	unsigned int timeout;
 	struct da9062 *chip;
 	struct da9062_watchdog *wdt;
 
@@ -213,11 +222,19 @@ static int da9062_wdt_probe(struct platform_device *pdev)
 	watchdog_set_drvdata(&wdt->wdtdev, wdt);
 	dev_set_drvdata(dev, &wdt->wdtdev);
 
-	ret = devm_watchdog_register_device(dev, &wdt->wdtdev);
-	if (ret < 0)
-		return ret;
+	timeout = da9062_wdt_read_timeout(wdt);
+	if (timeout)
+		wdt->wdtdev.timeout = timeout;
+
+	/* Set timeout from DT value if available */
+	watchdog_init_timeout(&wdt->wdtdev, 0, dev);
+
+	if (timeout) {
+		da9062_wdt_set_timeout(&wdt->wdtdev, wdt->wdtdev.timeout);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdtdev.status);
+	}
 
-	return da9062_wdt_ping(&wdt->wdtdev);
+	return devm_watchdog_register_device(dev, &wdt->wdtdev);
 }
 
 static int __maybe_unused da9062_wdt_suspend(struct device *dev)
-- 
2.23.0


             reply	other threads:[~2020-04-03 13:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-03 13:07 Stefan Riedmueller [this message]
2020-04-03 13:07 ` [PATCH v2 2/3] watchdog: da9063: Make use of pre-configured timeout during probe Stefan Riedmueller
2020-04-08  9:21   ` Adam Thomson
2020-04-25 17:50   ` Guenter Roeck
2020-04-03 13:07 ` [PATCH v2 3/3] watchdog: da9062: No need to ping manually before setting timeout Stefan Riedmueller
2020-04-08  8:54 ` [PATCH v2 1/3] watchdog: da9062: Initialize timeout during probe Adam Thomson
2020-04-25 17:49 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200403130728.39260-1-s.riedmueller@phytec.de \
    --to=s.riedmueller@phytec.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=support.opensource@diasemi.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).