linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffrey Hugo <jhugo@codeaurora.org>
To: manivannan.sadhasivam@linaro.org, hemantk@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jeffrey Hugo <jhugo@codeaurora.org>
Subject: [PATCH 1/3] bus: mhi: core: Handle syserr during power_up
Date: Mon,  6 Apr 2020 15:04:35 -0600	[thread overview]
Message-ID: <1586207077-22361-2-git-send-email-jhugo@codeaurora.org> (raw)
In-Reply-To: <1586207077-22361-1-git-send-email-jhugo@codeaurora.org>

The MHI device may be in the syserr state when we attempt to init it in
power_up().  Since we have no local state, the handling is simple -
reset the device and wait for it to transition out of the reset state.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
 drivers/bus/mhi/core/pm.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 52690cb..cd6ba23 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -9,6 +9,7 @@
 #include <linux/dma-direction.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/list.h>
 #include <linux/mhi.h>
 #include <linux/module.h>
@@ -760,6 +761,7 @@ static void mhi_deassert_dev_wake(struct mhi_controller *mhi_cntrl,
 
 int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 {
+	enum mhi_state state;
 	enum mhi_ee_type current_ee;
 	enum dev_st_transition next_state;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -829,6 +831,24 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 		goto error_bhi_offset;
 	}
 
+	state = mhi_get_mhi_state(mhi_cntrl);
+	if (state == MHI_STATE_SYS_ERR) {
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
+		ret = readl_poll_timeout(mhi_cntrl->regs + MHICTRL, val,
+					 !(val & MHICTRL_RESET_MASK), 1000,
+					 mhi_cntrl->timeout_ms * 1000);
+		if (ret) {
+			dev_info(dev, "Failed to reset syserr\n");
+			goto error_bhi_offset;
+		}
+
+		/*
+		 * device cleares INTVEC as part of RESET processing,
+		 * re-program it
+		 */
+		mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
+	}
+
 	/* Transition to next state */
 	next_state = MHI_IN_PBL(current_ee) ?
 		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
-- 
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

  reply	other threads:[~2020-04-06 21:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-06 21:04 [PATCH 0/3] Misc MHI fixes Jeffrey Hugo
2020-04-06 21:04 ` Jeffrey Hugo [this message]
2020-04-07  6:26   ` [PATCH 1/3] bus: mhi: core: Handle syserr during power_up Manivannan Sadhasivam
2020-04-07 15:11     ` Jeffrey Hugo
2020-04-07 15:32       ` Manivannan Sadhasivam
2020-04-06 21:04 ` [PATCH 2/3] bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails Jeffrey Hugo
2020-04-07  6:14   ` Manivannan Sadhasivam
2020-04-07 15:04     ` Jeffrey Hugo
2020-04-06 21:04 ` [PATCH 3/3] bus: mhi: core: Remove link_status() callback Jeffrey Hugo
2020-04-07  5:58   ` Manivannan Sadhasivam
2020-04-07 15:03     ` Jeffrey Hugo
2020-04-07 15:17       ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586207077-22361-2-git-send-email-jhugo@codeaurora.org \
    --to=jhugo@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).