linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
To: Nathan Lynch <nathanl@linux.ibm.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
	Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>,
	"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>,
	Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	"Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Subject: [PATCH v5 4/5] powerpc/sysfs: Show idle_purr and idle_spurr for every CPU
Date: Tue,  7 Apr 2020 14:17:42 +0530	[thread overview]
Message-ID: <1586249263-14048-5-git-send-email-ego@linux.vnet.ibm.com> (raw)
In-Reply-To: <1586249263-14048-1-git-send-email-ego@linux.vnet.ibm.com>

From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>

On Pseries LPARs, to calculate utilization, we need to know the
[S]PURR ticks when the CPUs were busy or idle.

The total PURR and SPURR ticks are already exposed via the per-cpu
sysfs files "purr" and "spurr". This patch adds support for exposing
the idle PURR and SPURR ticks via new per-cpu sysfs files named
"idle_purr" and "idle_spurr".

This patch also adds helper functions to accurately read the values of
idle_purr and idle_spurr especially from an interrupt context between
when the interrupt has occurred between the pseries_idle_prolog() and
pseries_idle_epilog(). This will ensure that the idle purr/spurr
values corresponding to the latest idle period is accounted for before
these values are read.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/idle.h | 32 ++++++++++++++++
 arch/powerpc/kernel/sysfs.c     | 82 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 111 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/idle.h b/arch/powerpc/include/asm/idle.h
index 0efb250..accd1f5 100644
--- a/arch/powerpc/include/asm/idle.h
+++ b/arch/powerpc/include/asm/idle.h
@@ -57,5 +57,37 @@ static inline void pseries_idle_epilog(void)
 	ppc64_runlatch_on();
 }
 
+static inline u64 read_this_idle_purr(void)
+{
+	/*
+	 * If we are reading from an idle context, update the
+	 * idle-purr cycles corresponding to the last idle period.
+	 * Since the idle context is not yet over, take a fresh
+	 * snapshot of the idle-purr.
+	 */
+	if (unlikely(get_lppaca()->idle == 1)) {
+		update_idle_purr_accounting();
+		snapshot_purr_idle_entry();
+	}
+
+	return be64_to_cpu(get_lppaca()->wait_state_cycles);
+}
+
+static inline u64 read_this_idle_spurr(void)
+{
+	/*
+	 * If we are reading from an idle context, update the
+	 * idle-spurr cycles corresponding to the last idle period.
+	 * Since the idle context is not yet over, take a fresh
+	 * snapshot of the idle-spurr.
+	 */
+	if (get_lppaca()->idle == 1) {
+		update_idle_spurr_accounting();
+		snapshot_spurr_idle_entry();
+	}
+
+	return *this_cpu_ptr(&idle_spurr_cycles);
+}
+
 #endif /* CONFIG_PPC_PSERIES */
 #endif
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 479c706..571b325 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -19,6 +19,7 @@
 #include <asm/smp.h>
 #include <asm/pmc.h>
 #include <asm/firmware.h>
+#include <asm/idle.h>
 #include <asm/svm.h>
 
 #include "cacheinfo.h"
@@ -760,6 +761,74 @@ static void create_svm_file(void)
 }
 #endif /* CONFIG_PPC_SVM */
 
+#ifdef CONFIG_PPC_PSERIES
+static void read_idle_purr(void *val)
+{
+	u64 *ret = val;
+
+	*ret = read_this_idle_purr();
+}
+
+static ssize_t idle_purr_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
+	u64 val;
+
+	smp_call_function_single(cpu->dev.id, read_idle_purr, &val, 1);
+	return sprintf(buf, "%llx\n", val);
+}
+static DEVICE_ATTR(idle_purr, 0400, idle_purr_show, NULL);
+
+static void create_idle_purr_file(struct device *s)
+{
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		device_create_file(s, &dev_attr_idle_purr);
+}
+
+static void remove_idle_purr_file(struct device *s)
+{
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		device_remove_file(s, &dev_attr_idle_purr);
+}
+
+static void read_idle_spurr(void *val)
+{
+	u64 *ret = val;
+
+	*ret = read_this_idle_spurr();
+}
+
+static ssize_t idle_spurr_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
+	u64 val;
+
+	smp_call_function_single(cpu->dev.id, read_idle_spurr, &val, 1);
+	return sprintf(buf, "%llx\n", val);
+}
+static DEVICE_ATTR(idle_spurr, 0400, idle_spurr_show, NULL);
+
+static void create_idle_spurr_file(struct device *s)
+{
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		device_create_file(s, &dev_attr_idle_spurr);
+}
+
+static void remove_idle_spurr_file(struct device *s)
+{
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		device_remove_file(s, &dev_attr_idle_spurr);
+}
+
+#else /* CONFIG_PPC_PSERIES */
+#define create_idle_purr_file(s)
+#define remove_idle_purr_file(s)
+#define create_idle_spurr_file(s)
+#define remove_idle_spurr_file(s)
+#endif /* CONFIG_PPC_PSERIES */
+
 static int register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -823,10 +892,13 @@ static int register_cpu_online(unsigned int cpu)
 		if (!firmware_has_feature(FW_FEATURE_LPAR))
 			add_write_permission_dev_attr(&dev_attr_purr);
 		device_create_file(s, &dev_attr_purr);
+		create_idle_purr_file(s);
 	}
 
-	if (cpu_has_feature(CPU_FTR_SPURR))
+	if (cpu_has_feature(CPU_FTR_SPURR)) {
 		device_create_file(s, &dev_attr_spurr);
+		create_idle_spurr_file(s);
+	}
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		device_create_file(s, &dev_attr_dscr);
@@ -910,11 +982,15 @@ static int unregister_cpu_online(unsigned int cpu)
 		device_remove_file(s, &dev_attr_mmcra);
 #endif /* CONFIG_PMU_SYSFS */
 
-	if (cpu_has_feature(CPU_FTR_PURR))
+	if (cpu_has_feature(CPU_FTR_PURR)) {
 		device_remove_file(s, &dev_attr_purr);
+		remove_idle_purr_file(s);
+	}
 
-	if (cpu_has_feature(CPU_FTR_SPURR))
+	if (cpu_has_feature(CPU_FTR_SPURR)) {
 		device_remove_file(s, &dev_attr_spurr);
+		remove_idle_spurr_file(s);
+	}
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		device_remove_file(s, &dev_attr_dscr);
-- 
1.9.4


  parent reply	other threads:[~2020-04-07  8:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-07  8:47 [PATCH v5 0/5] Track and expose idle PURR and SPURR ticks Gautham R. Shenoy
2020-04-07  8:47 ` [PATCH v5 1/5] powerpc: Move idle_loop_prolog()/epilog() functions to header file Gautham R. Shenoy
2020-05-06  2:51   ` Michael Ellerman
2020-04-07  8:47 ` [PATCH v5 2/5] powerpc/idle: Store PURR snapshot in a per-cpu global variable Gautham R. Shenoy
2020-04-07  8:47 ` [PATCH v5 3/5] powerpc/pseries: Account for SPURR ticks on idle CPUs Gautham R. Shenoy
2020-04-07  8:47 ` Gautham R. Shenoy [this message]
2020-04-07  8:47 ` [PATCH v5 5/5] Documentation: Document sysfs interfaces purr, spurr, idle_purr, idle_spurr Gautham R. Shenoy
2020-04-07  9:05 ` [PATCH v5 0/5] Track and expose idle PURR and SPURR ticks Naveen N. Rao
2020-04-07 11:24 ` Kamalesh Babulal
2020-04-20 22:46 ` Tyrel Datwyler
2020-04-23 10:02   ` Gautham R Shenoy
2020-04-30  2:34     ` Michael Ellerman
2020-04-30  4:16       ` Gautham R Shenoy
2020-05-01  5:50         ` Gautham R Shenoy
2020-04-21 13:30 ` Nathan Lynch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586249263-14048-5-git-send-email-ego@linux.vnet.ibm.com \
    --to=ego@linux.vnet.ibm.com \
    --cc=kamalesh@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=nathanl@linux.ibm.com \
    --cc=naveen.n.rao@linux.vnet.ibm.com \
    --cc=svaidy@linux.vnet.ibm.com \
    --cc=tyreld@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).