From: Aurabindo Pillai <mail@aurabindo.in>
To: christian.koenig@amd.com, alexander.deucher@amd.com, David1.Zhou@amd.com
Cc: airlied@linux.ie, daniel@ffwll.ch, Felix.Kuehling@amd.com,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] drm/amd/amdgpu: remove hardcoded module name in prints
Date: Wed, 8 Apr 2020 21:28:15 -0400 [thread overview]
Message-ID: <20200409012815.22309-4-mail@aurabindo.in> (raw)
In-Reply-To: <20200409012815.22309-1-mail@aurabindo.in>
Let format prefixes take care of printing the module name
through pr_fmt and dev_fmt definitions.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 6 +++---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++--
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 2 +-
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 2 +-
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c | 2 +-
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 2 +-
6 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index fa8ac9d19..4afd4ef54 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -325,13 +325,13 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate,
¶m);
if (ret) {
- pr_err("amdgpu: failed to validate PT BOs\n");
+ pr_err("failed to validate PT BOs\n");
return ret;
}
ret = amdgpu_amdkfd_validate(¶m, pd);
if (ret) {
- pr_err("amdgpu: failed to validate PD\n");
+ pr_err("failed to validate PD\n");
return ret;
}
@@ -340,7 +340,7 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
if (vm->use_cpu_for_update) {
ret = amdgpu_bo_kmap(pd, NULL);
if (ret) {
- pr_err("amdgpu: failed to kmap PD, ret=%d\n", ret);
+ pr_err("failed to kmap PD, ret=%d\n", ret);
return ret;
}
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index b8975857d..0a8c4a266 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1092,7 +1092,7 @@ static void amdgpu_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
return;
if (state == VGA_SWITCHEROO_ON) {
- pr_info("amdgpu: switched on\n");
+ pr_info("switched on\n");
/* don't suspend or resume card normally */
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
@@ -1106,7 +1106,7 @@ static void amdgpu_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
dev->switch_power_state = DRM_SWITCH_POWER_ON;
drm_kms_helper_poll_enable(dev);
} else {
- pr_info("amdgpu: switched off\n");
+ pr_info("switched off\n");
drm_kms_helper_poll_disable(dev);
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
amdgpu_device_suspend(dev, true);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 5ed4227f3..0cc4c67f9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -260,7 +260,7 @@ int amdgpu_irq_init(struct amdgpu_device *adev)
nvec = pci_alloc_irq_vectors(adev->pdev, 1, 1, flags);
if (nvec > 0) {
adev->irq.msi_enabled = true;
- dev_dbg(adev->dev, "amdgpu: using MSI/MSI-X.\n");
+ dev_dbg(adev->dev, "using MSI/MSI-X.\n");
}
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
index b20503935..c1a530dbe 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c
@@ -858,7 +858,7 @@ static int gmc_v6_0_sw_init(void *handle)
r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(44));
if (r) {
- dev_warn(adev->dev, "amdgpu: No suitable DMA available.\n");
+ dev_warn(adev->dev, "No suitable DMA available.\n");
return r;
}
adev->need_swiotlb = drm_need_swiotlb(44);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
index 9da9596a3..e8529e244 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
@@ -1019,7 +1019,7 @@ static int gmc_v7_0_sw_init(void *handle)
r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(40));
if (r) {
- pr_warn("amdgpu: No suitable DMA available\n");
+ pr_warn("No suitable DMA available\n");
return r;
}
adev->need_swiotlb = drm_need_swiotlb(40);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 27d83204f..0aa5b8280 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -1144,7 +1144,7 @@ static int gmc_v8_0_sw_init(void *handle)
r = dma_set_mask_and_coherent(adev->dev, DMA_BIT_MASK(40));
if (r) {
- pr_warn("amdgpu: No suitable DMA available\n");
+ pr_warn("No suitable DMA available\n");
return r;
}
adev->need_swiotlb = drm_need_swiotlb(40);
--
2.26.0
next prev parent reply other threads:[~2020-04-09 1:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-09 1:28 [PATCH v2 0/3] drm/amd/amdgpu: Add print format prefix Aurabindo Pillai
2020-04-09 1:28 ` [PATCH v2 1/3] drm/amd/amdgpu: add prefix for pr_* prints Aurabindo Pillai
2020-04-09 1:28 ` [PATCH v2 2/3] drm/amd/amdgpu: add print prefix for dev_* variants Aurabindo Pillai
2020-04-09 1:28 ` Aurabindo Pillai [this message]
2020-04-13 15:12 ` [PATCH v2 0/3] drm/amd/amdgpu: Add print format prefix Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200409012815.22309-4-mail@aurabindo.in \
--to=mail@aurabindo.in \
--cc=David1.Zhou@amd.com \
--cc=Felix.Kuehling@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).