From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: jbrunet@baylibre.com, linux-amlogic@lists.infradead.org,
linux-clk@vger.kernel.org
Cc: narmstrong@baylibre.com, mturquette@baylibre.com,
sboyd@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v2 2/4] clk: meson: meson8b: Fix the polarity of the RESET_N lines
Date: Fri, 17 Apr 2020 20:41:25 +0200 [thread overview]
Message-ID: <20200417184127.1319871-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20200417184127.1319871-1-martin.blumenstingl@googlemail.com>
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST and
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE are active low. This means:
- asserting them requires setting the register value to 0
- de-asserting them requires setting the register value to 1
Set the register value accordingly for these two reset lines by setting
the inverted the register value compared to all other reset lines.
Fixes: 189621726bc2f6 ("clk: meson: meson8b: register the built-in reset controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/meson8b.c | 79 ++++++++++++++++++++++++++-----------
1 file changed, 56 insertions(+), 23 deletions(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 90d284ffc780..1dec8d5404a1 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3506,54 +3506,87 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
static const struct meson8b_clk_reset_line {
u32 reg;
u8 bit_idx;
+ bool active_low;
} meson8b_clk_reset_bits[] = {
[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 30,
+ .active_low = false,
},
[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 29,
+ .active_low = false,
},
[CLKC_RESET_SCU_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 28,
+ .active_low = false,
},
[CLKC_RESET_CPU3_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 27,
+ .active_low = false,
},
[CLKC_RESET_CPU2_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 26,
+ .active_low = false,
},
[CLKC_RESET_CPU1_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 25,
+ .active_low = false,
},
[CLKC_RESET_CPU0_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 24,
+ .active_low = false,
},
[CLKC_RESET_A5_GLOBAL_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 18,
+ .active_low = false,
},
[CLKC_RESET_A5_AXI_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 17,
+ .active_low = false,
},
[CLKC_RESET_A5_ABP_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+ .reg = HHI_SYS_CPU_CLK_CNTL0,
+ .bit_idx = 16,
+ .active_low = false,
},
[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
- .reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+ .reg = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 30,
+ .active_low = false,
},
[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
- .reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+ .reg = HHI_VID_CLK_CNTL,
+ .bit_idx = 15,
+ .active_low = false,
},
[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
- .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+ .reg = HHI_VID_DIVIDER_CNTL,
+ .bit_idx = 7,
+ .active_low = false,
},
[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
- .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+ .reg = HHI_VID_DIVIDER_CNTL,
+ .bit_idx = 3,
+ .active_low = false,
},
[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
- .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+ .reg = HHI_VID_DIVIDER_CNTL,
+ .bit_idx = 1,
+ .active_low = true,
},
[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
- .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+ .reg = HHI_VID_DIVIDER_CNTL,
+ .bit_idx = 0,
+ .active_low = true,
},
};
@@ -3562,22 +3595,22 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
{
struct meson8b_clk_reset *meson8b_clk_reset =
container_of(rcdev, struct meson8b_clk_reset, reset);
- unsigned long flags;
const struct meson8b_clk_reset_line *reset;
+ unsigned int value = 0;
+ unsigned long flags;
if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
return -EINVAL;
reset = &meson8b_clk_reset_bits[id];
+ if (assert != reset->active_low)
+ value = BIT(reset->bit_idx);
+
spin_lock_irqsave(&meson_clk_lock, flags);
- if (assert)
- regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
- BIT(reset->bit_idx), BIT(reset->bit_idx));
- else
- regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
- BIT(reset->bit_idx), 0);
+ regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
+ BIT(reset->bit_idx), value);
spin_unlock_irqrestore(&meson_clk_lock, flags);
--
2.26.1
next prev parent reply other threads:[~2020-04-17 18:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-17 18:41 [PATCH v2 0/4] clk: meson8b: updates for video clocks / resets Martin Blumenstingl
2020-04-17 18:41 ` [PATCH v2 1/4] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel Martin Blumenstingl
2020-04-17 18:41 ` Martin Blumenstingl [this message]
2020-04-17 18:41 ` [PATCH v2 3/4] clk: meson: meson8b: Fix the vclk_div{1,2,4,6,12}_en gate bits Martin Blumenstingl
2020-04-17 18:41 ` [PATCH v2 4/4] clk: meson: meson8b: Make the CCF use the glitch-free VPU mux Martin Blumenstingl
2020-04-29 11:44 ` [PATCH v2 0/4] clk: meson8b: updates for video clocks / resets Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200417184127.1319871-3-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).