From: Lubomir Rintel <lkundrak@v3.sk>
To: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 07/10] clk: mmp2: Add the I2C clocks
Date: Sun, 19 Apr 2020 19:27:39 +0200 [thread overview]
Message-ID: <20200419172742.674717-8-lkundrak@v3.sk> (raw)
In-Reply-To: <20200419172742.674717-1-lkundrak@v3.sk>
A pair of fractional clock sources for PLLs and gates.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/clk/mmp/clk-of-mmp2.c | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index ac88ea99b7c68..dcdff06a698ac 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -67,6 +67,9 @@
#define MPMU_POSR 0x10
#define MPMU_UART_PLL 0x14
#define MPMU_PLL2_CR 0x34
+#define MPMU_I2S0_PLL 0x40
+#define MPMU_I2S1_PLL 0x44
+#define MPMU_ACGR 0x1024
/* MMP3 specific below */
#define MPMU_PLL3_CR 0x50
#define MPMU_PLL3_CTRL1 0x58
@@ -91,6 +94,7 @@ static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
{MMP2_CLK_CLK32, "clk32", NULL, 0, 32768},
{MMP2_CLK_VCTCXO, "vctcxo", NULL, 0, 26000000},
{MMP2_CLK_USB_PLL, "usb_pll", NULL, 0, 480000000},
+ {0, "i2s_pll", NULL, 0, 99666667},
};
static struct mmp_param_pll_clk pll_clks[] = {
@@ -139,6 +143,34 @@ static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
{.num = 3521, .den = 689}, /*19.23MHZ */
};
+static struct mmp_clk_factor_masks i2s_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x7fff,
+ .den_mask = 0x1fff,
+ .num_shift = 0,
+ .den_shift = 15,
+ .enable_mask = 0xd0000000,
+};
+
+static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
+ {.num = 24868, .den = 511}, /* 2.0480 MHz */
+ {.num = 28003, .den = 793}, /* 2.8224 MHz */
+ {.num = 24941, .den = 1025}, /* 4.0960 MHz */
+ {.num = 28003, .den = 1586}, /* 5.6448 MHz */
+ {.num = 31158, .den = 2561}, /* 8.1920 MHz */
+ {.num = 16288, .den = 1845}, /* 11.2896 MHz */
+ {.num = 20772, .den = 2561}, /* 12.2880 MHz */
+ {.num = 8144, .den = 1845}, /* 22.5792 MHz */
+ {.num = 10386, .den = 2561}, /* 24.5760 MHz */
+};
+
+static DEFINE_SPINLOCK(acgr_lock);
+
+static struct mmp_param_gate_clk mpmu_gate_clks[] = {
+ {MMP2_CLK_I2S0, "i2s0_clk", "i2s0_pll", CLK_SET_RATE_PARENT, MPMU_ACGR, 0x200000, 0x200000, 0x0, 0, &acgr_lock},
+ {MMP2_CLK_I2S1, "i2s1_clk", "i2s1_pll", CLK_SET_RATE_PARENT, MPMU_ACGR, 0x100000, 0x100000, 0x0, 0, &acgr_lock},
+};
+
static void mmp2_main_clk_init(struct mmp2_clk_unit *pxa_unit)
{
struct clk *clk;
@@ -166,6 +198,20 @@ static void mmp2_main_clk_init(struct mmp2_clk_unit *pxa_unit)
&uart_factor_masks, uart_factor_tbl,
ARRAY_SIZE(uart_factor_tbl), NULL);
mmp_clk_add(unit, MMP2_CLK_UART_PLL, clk);
+
+ mmp_clk_register_factor("i2s0_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_I2S0_PLL,
+ &i2s_factor_masks, i2s_factor_tbl,
+ ARRAY_SIZE(i2s_factor_tbl), NULL);
+ mmp_clk_register_factor("i2s1_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_I2S1_PLL,
+ &i2s_factor_masks, i2s_factor_tbl,
+ ARRAY_SIZE(i2s_factor_tbl), NULL);
+
+ mmp_register_gate_clks(unit, mpmu_gate_clks, pxa_unit->mpmu_base,
+ ARRAY_SIZE(mpmu_gate_clks));
}
static DEFINE_SPINLOCK(uart0_lock);
--
2.26.0
next prev parent reply other threads:[~2020-04-19 17:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-19 17:27 [PATCH 00/10] clk: mmp2: Enable Audio and GPU on MMP2 and MMP3 Lubomir Rintel
2020-04-19 17:27 ` [PATCH 01/10] clk: mmp: frac: Do not lose last 4 digits of precision Lubomir Rintel
2020-04-19 17:27 ` [PATCH 02/10] clk: mmp: frac: Allow setting bits other than the numerator/denominator Lubomir Rintel
2020-04-19 17:27 ` [PATCH 03/10] dt-bindings: marvell,mmp2: Add clock id for the I2S clocks Lubomir Rintel
2020-04-30 14:12 ` Rob Herring
2020-04-19 17:27 ` [PATCH 04/10] dt-bindings: marvell,mmp2: Add clock id for the Audio clock Lubomir Rintel
2020-04-30 14:12 ` Rob Herring
2020-04-19 17:27 ` [PATCH 05/10] clk: mmp2: Move thermal register defines up a bit Lubomir Rintel
2020-04-19 17:27 ` [PATCH 06/10] clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() Lubomir Rintel
2020-04-19 17:27 ` Lubomir Rintel [this message]
2020-04-19 17:27 ` [PATCH 08/10] clk: mmp2: Add the audio clock Lubomir Rintel
2020-04-19 17:27 ` [PATCH 09/10] dt-bindings: marvell,mmp2: Add ids for the power domains Lubomir Rintel
2020-04-30 14:13 ` Rob Herring
2020-04-19 17:27 ` [PATCH 10/10] clk: mmp2: Add support for power islands Lubomir Rintel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200419172742.674717-8-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).