From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v2] dt-bindings: spi: Convert UniPhier SPI controller to json-schema
Date: Fri, 24 Apr 2020 18:29:22 +0900 [thread overview]
Message-ID: <1587720562-15293-1-git-send-email-hayashi.kunihiko@socionext.com> (raw)
Convert UniPhier SPI controller binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
Changes since v1:
- Put "#address-cells" and "#size-cells" into the required list
.../bindings/spi/socionext,uniphier-spi.yaml | 57 ++++++++++++++++++++++
.../devicetree/bindings/spi/spi-uniphier.txt | 28 -----------
2 files changed, 57 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt
diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
new file mode 100644
index 0000000..c254092
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SPI controller
+
+description: |
+ UniPhier SoCs have SCSSI which supports SPI single channel.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ const: socionext,uniphier-scssi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ reg = <0x54006000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 39 4>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
deleted file mode 100644
index e120157..0000000
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Socionext UniPhier SPI controller driver
-
-UniPhier SoCs have SCSSI which supports SPI single channel.
-
-Required properties:
- - compatible: should be "socionext,uniphier-scssi"
- - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - interrupts: a single interrupt specifier
- - pinctrl-names: should be "default"
- - pinctrl-0: pin control state for the default mode
- - clocks: a phandle to the clock for the device
- - resets: a phandle to the reset control for the device
-
-Example:
-
-spi0: spi@54006000 {
- compatible = "socionext,uniphier-scssi";
- reg = <0x54006000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 39 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&peri_clk 11>;
- resets = <&peri_rst 11>;
-};
--
2.7.4
next reply other threads:[~2020-04-24 9:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 9:29 Kunihiko Hayashi [this message]
2020-05-11 21:21 ` [PATCH v2] dt-bindings: spi: Convert UniPhier SPI controller to json-schema Rob Herring
2020-05-12 10:28 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587720562-15293-1-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).