[PATCH v4 03/10] input: elants: remove unused axes

From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: David Heidelberg <david@ixit.cz>,
	Dmitry Osipenko <digetx@gmail.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Henrik Rydberg <rydberg@bitmath.org>,
	James Chen <james.chen@emc.com.tw>,
	Johnny Chuang <johnny.chuang@emc.com.tw>,
	Rob Herring <robh+dt@kernel.org>,
	Scott Liu <scott.liu@emc.com.tw>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 03/10] input: elants: remove unused axes
Date: Sun, 26 Apr 2020 18:11:12 +0200	[thread overview]
Message-ID: <b6cb0f810eec2d5c6245d6128502eebd342ca02a.1587916846.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1587916846.git.mirq-linux@rere.qmqm.pl>

Driver only ever reports MT events and input_mt_init_slots() sets up
emulated axes already.  Clear the capabilities not generated directly
and move MT axes setup, so they are visible by input_mt_init_slots().

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
---
v4: reword commitmsg; reorder axis setup
---
 drivers/input/touchscreen/elants_i2c.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index ddebd3741145..58aa9b7dbcbf 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1312,25 +1312,7 @@ static int elants_i2c_probe(struct i2c_client *client,
 	ts->input->name = "Elan Touchscreen";
 	ts->input->id.bustype = BUS_I2C;
 
-	__set_bit(BTN_TOUCH, ts->input->keybit);
-	__set_bit(EV_ABS, ts->input->evbit);
-	__set_bit(EV_KEY, ts->input->evbit);
-
-	/* Single touch input params setup */
-	input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
-	input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
-	input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
-	input_abs_set_res(ts->input, ABS_X, ts->x_res);
-	input_abs_set_res(ts->input, ABS_Y, ts->y_res);
-
 	/* Multitouch input params setup */
-	error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
-				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-	if (error) {
-		dev_err(&client->dev,
-			"failed to initialize MT slots: %d\n", error);
-		return error;
-	}
 
 	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
 	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
@@ -1340,6 +1322,14 @@ static int elants_i2c_probe(struct i2c_client *client,
 	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
 	input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
 
+	error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to initialize MT slots: %d\n", error);
+		return error;
+	}
+
 	error = input_register_device(ts->input);
 	if (error) {
 		dev_err(&client->dev,
-- 
2.20.1

