From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: David Heidelberg <david@ixit.cz>,
Dmitry Osipenko <digetx@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Henrik Rydberg <rydberg@bitmath.org>,
James Chen <james.chen@emc.com.tw>,
Johnny Chuang <johnny.chuang@emc.com.tw>,
Rob Herring <robh+dt@kernel.org>,
Scott Liu <scott.liu@emc.com.tw>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 10/10] dt-bindings: input: touchscreen: elants_i2c: convert to YAML
Date: Sun, 26 Apr 2020 19:47:55 +0200 [thread overview]
Message-ID: <e8becd365c8c083e31a502568ebabb1019d4ee2d.1587923061.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1587923061.git.mirq-linux@rere.qmqm.pl>
From: David Heidelberg <david@ixit.cz>
Convert elants_i2c.txt DT binding to YAML and put into correct directory.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
.../devicetree/bindings/input/elants_i2c.txt | 38 ----------
.../input/touchscreen/elan,elants_i2c.yaml | 69 +++++++++++++++++++
2 files changed, 69 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt
deleted file mode 100644
index 1bc60303f0ea..000000000000
--- a/Documentation/devicetree/bindings/input/elants_i2c.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Elantech I2C Touchscreen
-
-Required properties:
-- compatible: must be "elan,ekth3500" or "elan,ektf3624".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
- binding[0]).
-
-Optional properties:
-- wakeup-source: touchscreen can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
- pinctrl binding [1]).
-- reset-gpios: reset gpio the chip is connected to.
-- vcc33-supply: a phandle for the regulator supplying 3.3V power.
-- vccio-supply: a phandle for the regulator supplying IO power.
-- see [2] for additional properties
-
-For additional optional properties see: touchscreen.txt
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
- &i2c1 {
- /* ... */
-
- touchscreen@10 {
- compatible = "elan,ekth3500";
- reg = <0x10>;
- interrupt-parent = <&gpio4>;
- interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
- wakeup-source;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
new file mode 100644
index 000000000000..a792d6377b1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Elantech I2C Touchscreen
+
+maintainers:
+ - David Heidelberg <david@ixit.cz>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - elan,ektf3624
+ - elan,ekth3500
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: touchscreen can be used as a wakeup source.
+
+ reset-gpios:
+ description: reset gpio the chip is connected to.
+
+ vcc33-supply:
+ description: a phandle for the regulator supplying 3.3V power.
+
+ vccio-supply:
+ description: a phandle for the regulator supplying IO power.
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
--
2.20.1
next prev parent reply other threads:[~2020-04-26 17:48 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-26 17:47 [PATCH v5 00/10] input: elants: Support Asus TF300T touchscreen Michał Mirosław
2020-04-26 17:47 ` [PATCH v5 02/10] input: elants: support old touch report format Michał Mirosław
2020-04-26 17:47 ` [PATCH v5 01/10] input: elants: document some registers and values Michał Mirosław
2020-05-18 4:07 ` Dmitry Torokhov
2020-05-18 9:18 ` Dmitry Osipenko
2020-04-26 17:47 ` [PATCH v5 03/10] input: elants: remove unused axes Michał Mirosław
2020-04-26 18:34 ` Dmitry Osipenko
2020-05-18 3:39 ` Dmitry Torokhov
2020-04-26 17:47 ` [PATCH v5 04/10] input: elants: override touchscreen info with DT properties Michał Mirosław
2020-05-18 4:02 ` Dmitry Torokhov
2020-04-26 17:47 ` [PATCH v5 05/10] input: elants: refactor elants_i2c_execute_command() Michał Mirosław
2020-05-14 19:43 ` Dmitry Osipenko
2020-05-18 4:03 ` Dmitry Torokhov
2020-04-26 17:47 ` [PATCH v5 06/10] input: elants: read touchscreen size for EKTF3624 Michał Mirosław
2020-04-26 17:47 ` [PATCH v5 07/10] input: elants: support 0x66 reply opcode for reporting touches Michał Mirosław
2020-05-18 4:05 ` Dmitry Torokhov
2020-05-18 9:10 ` Dmitry Osipenko
2020-04-26 17:47 ` [PATCH v5 08/10] dt-bindings: input: elants-i2c: Document common touchscreen properties Michał Mirosław
2020-04-26 17:47 ` [PATCH v5 09/10] dt-bindings: input: elants-i2c: Document eKTF3624 Michał Mirosław
2020-04-26 17:47 ` Michał Mirosław [this message]
2020-05-14 19:45 ` [PATCH v5 00/10] input: elants: Support Asus TF300T touchscreen Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e8becd365c8c083e31a502568ebabb1019d4ee2d.1587923061.git.mirq-linux@rere.qmqm.pl \
--to=mirq-linux@rere.qmqm.pl \
--cc=david@ixit.cz \
--cc=digetx@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=james.chen@emc.com.tw \
--cc=johnny.chuang@emc.com.tw \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rydberg@bitmath.org \
--cc=scott.liu@emc.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).