linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abhishek Goel <huntbag@linux.vnet.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Cc: npiggin@gmail.com, ego@linux.vnet.ibm.com, svaidy@linux.ibm.com,
	mpe@ellerman.id.au, oohall@gmail.com, mikey@neuling.org,
	psampat@linux.ibm.com, Abhishek Goel <huntbag@linux.vnet.ibm.com>
Subject: [RFC 3/3] powernv/cpuidle : Introduce capability for firmware-enabled-stop
Date: Sun, 26 Apr 2020 21:10:27 -0500	[thread overview]
Message-ID: <20200427021027.114582-3-huntbag@linux.vnet.ibm.com> (raw)
In-Reply-To: <20200427021027.114582-1-huntbag@linux.vnet.ibm.com>

This patch introduces the capability for firmware to handle the stop
states instead. A bit is set based on the discovery of the feature
and correspondingly also the responsibility to handle the stop states.

If Kernel does not know about stop version, it can fallback to opal for
idle stop support if firmware-stop-supported property is present.

Earlier this patch was posted as part of this series :
https://lkml.org/lkml/2020/3/4/589

Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
---

 v1->v2: This patch is newly added in this series.

 arch/powerpc/include/asm/processor.h  |  1 +
 arch/powerpc/kernel/dt_cpu_ftrs.c     |  8 ++++++++
 arch/powerpc/platforms/powernv/idle.c | 27 ++++++++++++++++-----------
 3 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 66fa20476d0e..d5c6532b11ef 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -430,6 +430,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 #define STOP_ENABLE		0x00000001
+#define FIRMWARE_STOP_ENABLE	0x00000010
 
 #define STOP_VERSION_P9       0x1
 
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index db1a525e090d..ff4a87b79702 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -298,6 +298,13 @@ static int __init feat_enable_idle_stop(struct dt_cpu_feature *f)
 	return 1;
 }
 
+static int __init feat_enable_firmware_stop(struct dt_cpu_feature *f)
+{
+	stop_dep.cpuidle_prop |= FIRMWARE_STOP_ENABLE;
+
+	return 1;
+}
+
 static int __init feat_enable_mmu_hash(struct dt_cpu_feature *f)
 {
 	u64 lpcr;
@@ -592,6 +599,7 @@ static struct dt_cpu_feature_match __initdata
 	{"idle-nap", feat_enable_idle_nap, 0},
 	{"alignment-interrupt-dsisr", feat_enable_align_dsisr, 0},
 	{"idle-stop", feat_enable_idle_stop, 0},
+	{"firmware-stop-supported", feat_enable_firmware_stop, 0},
 	{"machine-check-power8", feat_enable_mce_power8, 0},
 	{"performance-monitor-power8", feat_enable_pmu_power8, 0},
 	{"data-stream-control-register", feat_enable_dscr, CPU_FTR_DSCR},
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 538f0842ac3f..0de5de81902e 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -633,16 +633,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 	unsigned long mmcr0 = 0;
 	struct p9_sprs sprs = {}; /* avoid false used-uninitialised */
 	bool sprs_saved = false;
-	int rc = 0;
-
-	/*
-	 * Kernel takes decision whether to make OPAL call or not. This logic
-	 * will be combined with the logic for BE opal to take decision.
-	 */
-	if (firmware_stop_supported) {
-		rc = opal_cpu_idle(cpu_to_be64(__pa(&srr1)), (uint64_t) psscr);
-		goto out;
-	}
 
 	if (!(psscr & (PSSCR_EC|PSSCR_ESL))) {
 		/* EC=ESL=0 case */
@@ -835,6 +825,19 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
 	return srr1;
 }
 
+static unsigned long power9_firmware_idle_stop(unsigned long psscr, bool mmu_on)
+{
+	unsigned long srr1;
+	int rc;
+
+	rc = opal_cpu_idle(cpu_to_be64(__pa(&srr1)), (uint64_t) psscr);
+
+	if (mmu_on)
+		mtmsr(MSR_KERNEL);
+	return srr1;
+
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static unsigned long power9_offline_stop(unsigned long psscr)
 {
@@ -1394,9 +1397,11 @@ static int __init pnv_init_idle_states(void)
 	    !(stop_dep.cpuidle_prop & STOP_ENABLE))
 		goto out;
 
-	/* Check for supported version in kernel */
+	/* Check for supported version in kernel or fallback to kernel*/
 	if (stop_dep.stop_version & STOP_VERSION_P9) {
 		stop_dep.idle_stop = power9_idle_stop;
+	} else if (stop_dep.cpuidle_prop & FIRMWARE_STOP_ENABLE) {
+		stop_dep.idle_stop = power9_firmware_idle_stop;
 	} else {
 		stop_dep.idle_stop = NULL;
 		goto out;
-- 
2.17.1


  parent reply	other threads:[~2020-04-27  2:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-27  2:10 [RFC 1/3] powernv/cpuidle : Support for pre-entry and post exit of stop state in firmware Abhishek Goel
2020-04-27  2:10 ` [RFC 2/3] powernv/cpuidle : Interface for an idle-stop dependency structure Abhishek Goel
2020-04-27 13:47   ` Gautham R Shenoy
2020-04-27  2:10 ` Abhishek Goel [this message]
2020-04-27 13:48   ` [RFC 3/3] powernv/cpuidle : Introduce capability for firmware-enabled-stop Gautham R Shenoy
2020-04-27 10:26 ` [RFC 1/3] powernv/cpuidle : Support for pre-entry and post exit of stop state in firmware Gautham R Shenoy
2020-04-28  1:08 ` Nicholas Piggin
2020-04-30  5:52   ` Abhishek
2020-05-02 11:40     ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200427021027.114582-3-huntbag@linux.vnet.ibm.com \
    --to=huntbag@linux.vnet.ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=oohall@gmail.com \
    --cc=psampat@linux.ibm.com \
    --cc=svaidy@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).