From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rishabh Bhatnagar <rishabhb@codeaurora.org>,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/2] remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
Date: Mon, 27 Apr 2020 17:01:10 -0700 [thread overview]
Message-ID: <20200428000110.2958704-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20200428000110.2958704-1-bjorn.andersson@linaro.org>
Add audio, compute and sensor DSP compatibles to the Qualcomm PAS
binding and driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 62 ++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 8ecc157f1ed1..5f2266c74448 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -508,6 +508,26 @@ static const struct adsp_data sm8150_adsp_resource = {
.ssctl_id = 0x14,
};
+static const struct adsp_data sm8250_adsp_resource = {
+ .crash_reason_smem = 423,
+ .firmware_name = "adsp.mdt",
+ .pas_id = 1,
+ .has_aggre2_clk = false,
+ .auto_boot = true,
+ .active_pd_names = (char*[]){
+ "load_state",
+ NULL
+ },
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mx",
+ NULL
+ },
+ .ssr_name = "lpass",
+ .sysmon_name = "adsp",
+ .ssctl_id = 0x14,
+};
+
static const struct adsp_data msm8998_adsp_resource = {
.crash_reason_smem = 423,
.firmware_name = "adsp.mdt",
@@ -553,6 +573,25 @@ static const struct adsp_data sm8150_cdsp_resource = {
.ssctl_id = 0x17,
};
+static const struct adsp_data sm8250_cdsp_resource = {
+ .crash_reason_smem = 601,
+ .firmware_name = "cdsp.mdt",
+ .pas_id = 18,
+ .has_aggre2_clk = false,
+ .auto_boot = true,
+ .active_pd_names = (char*[]){
+ "load_state",
+ NULL
+ },
+ .proxy_pd_names = (char*[]){
+ "cx",
+ NULL
+ },
+ .ssr_name = "cdsp",
+ .sysmon_name = "cdsp",
+ .ssctl_id = 0x17,
+};
+
static const struct adsp_data mpss_resource_init = {
.crash_reason_smem = 421,
.firmware_name = "modem.mdt",
@@ -604,6 +643,26 @@ static const struct adsp_data sm8150_slpi_resource = {
.ssctl_id = 0x16,
};
+static const struct adsp_data sm8250_slpi_resource = {
+ .crash_reason_smem = 424,
+ .firmware_name = "slpi.mdt",
+ .pas_id = 12,
+ .has_aggre2_clk = false,
+ .auto_boot = true,
+ .active_pd_names = (char*[]){
+ "load_state",
+ NULL
+ },
+ .proxy_pd_names = (char*[]){
+ "lcx",
+ "lmx",
+ NULL
+ },
+ .ssr_name = "dsps",
+ .sysmon_name = "slpi",
+ .ssctl_id = 0x16,
+};
+
static const struct adsp_data msm8998_slpi_resource = {
.crash_reason_smem = 424,
.firmware_name = "slpi.mdt",
@@ -644,6 +703,9 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
{ .compatible = "qcom,sm8150-mpss-pas", .data = &mpss_resource_init},
{ .compatible = "qcom,sm8150-slpi-pas", .data = &sm8150_slpi_resource},
+ { .compatible = "qcom,sm8250-adsp-pas", .data = &sm8250_adsp_resource},
+ { .compatible = "qcom,sm8250-cdsp-pas", .data = &sm8250_cdsp_resource},
+ { .compatible = "qcom,sm8250-slpi-pas", .data = &sm8250_slpi_resource},
{ },
};
MODULE_DEVICE_TABLE(of, adsp_of_match);
--
2.24.0
next prev parent reply other threads:[~2020-04-28 0:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-28 0:01 [PATCH 1/2] dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs Bjorn Andersson
2020-04-28 0:01 ` Bjorn Andersson [this message]
2020-04-28 10:31 ` [PATCH 2/2] remoteproc: qcom: pas: Add SM8250 PAS remoteprocs Sibi Sankar
2020-04-28 10:25 ` [PATCH 1/2] dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200428000110.2958704-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=ohad@wizery.com \
--cc=rishabhb@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sibis@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).