[v3,20/75] x86/boot/compressed/64: Call set_sev_encryption_mask earlier
diff mbox series

Message ID 20200428151725.31091-21-joro@8bytes.org
State New
Headers show
Series
  • x86: SEV-ES Guest Support
Related show

Commit Message

Joerg Roedel April 28, 2020, 3:16 p.m. UTC
From: Joerg Roedel <jroedel@suse.de>

Call set_sev_encryption_mask() while still on the stage 1 #VC-handler,
because the stage 2 handler needs our own page-tables to be set up, to
which calling set_sev_encryption_mask() is a prerequisite.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/boot/compressed/head_64.S      | 8 +++++++-
 arch/x86/boot/compressed/ident_map_64.c | 3 ---
 2 files changed, 7 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index af571127c9ba..940d44149a29 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -534,9 +534,15 @@  SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 	rep	stosq
 
 /*
- * Load stage2 IDT and switch to our own page-table
+ * If running as an SEV guest, the encryption mask is required in the
+ * page-table setup code below. When the guest also has SEV-ES enabled
+ * set_sev_encryption_mask() will cause #VC exceptions, but the stage2
+ * handler can't map its GHCB because the page-table is not set up yet.
+ * So set up the encryption mask here while still on the stage1 #VC
+ * handler. Then load stage2 IDT and switch to our own page-table.
  */
 	pushq	%rsi
+	call	set_sev_encryption_mask
 	call	load_stage2_idt
 	call	initialize_identity_maps
 	popq	%rsi
diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c
index 83385a551f01..6ee089fdc65a 100644
--- a/arch/x86/boot/compressed/ident_map_64.c
+++ b/arch/x86/boot/compressed/ident_map_64.c
@@ -107,9 +107,6 @@  static void add_identity_map(unsigned long start, unsigned long end)
 /* Locates and clears a region for a new top level page table. */
 void initialize_identity_maps(void)
 {
-	/* If running as an SEV guest, the encryption mask is required. */
-	set_sev_encryption_mask();
-
 	/* Exclude the encryption mask from __PHYSICAL_MASK */
 	physical_mask &= ~sme_me_mask;