From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <jic23@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <mcoquelin.stm32@gmail.com>,
<alexandre.torgue@st.com>, <fabrice.gasnier@st.com>,
<olivier.moysan@st.com>, <linux-iio@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH] iio: adc: stm32-dfsdm: fix device used to request dma
Date: Thu, 30 Apr 2020 11:28:46 +0200 [thread overview]
Message-ID: <1588238926-23964-2-git-send-email-fabrice.gasnier@st.com> (raw)
In-Reply-To: <1588238926-23964-1-git-send-email-fabrice.gasnier@st.com>
DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink
Fix this by using device struct from platform device to request dma chan.
Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 76a60d9..506bf51 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -62,7 +62,7 @@ enum sd_converter_type {
struct stm32_dfsdm_dev_data {
int type;
- int (*init)(struct iio_dev *indio_dev);
+ int (*init)(struct device *dev, struct iio_dev *indio_dev);
unsigned int num_channels;
const struct regmap_config *regmap_cfg;
};
@@ -1365,11 +1365,12 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
}
}
-static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+static int stm32_dfsdm_dma_request(struct device *dev,
+ struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) {
int ret = PTR_ERR(adc->dma_chan);
@@ -1425,7 +1426,7 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
&adc->dfsdm->ch_list[ch->channel]);
}
-static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_audio_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1452,10 +1453,10 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
indio_dev->num_channels = 1;
indio_dev->channels = ch;
- return stm32_dfsdm_dma_request(indio_dev);
+ return stm32_dfsdm_dma_request(dev, indio_dev);
}
-static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1499,17 +1500,17 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
init_completion(&adc->completion);
/* Optionally request DMA */
- ret = stm32_dfsdm_dma_request(indio_dev);
+ ret = stm32_dfsdm_dma_request(dev, indio_dev);
if (ret) {
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
- dev_err(&indio_dev->dev,
+ dev_err(dev,
"DMA channel request failed with %d\n",
ret);
return ret;
}
- dev_dbg(&indio_dev->dev, "No DMA support\n");
+ dev_dbg(dev, "No DMA support\n");
return 0;
}
@@ -1622,7 +1623,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
adc->dev_data = dev_data;
- ret = dev_data->init(iio);
+ ret = dev_data->init(dev, iio);
if (ret < 0)
return ret;
--
2.7.4
next prev parent reply other threads:[~2020-04-30 9:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-30 9:28 [PATCH] iio: adc: stm32-adc: fix device used to request dma Fabrice Gasnier
2020-04-30 9:28 ` Fabrice Gasnier [this message]
2020-05-03 13:17 ` [PATCH] iio: adc: stm32-dfsdm: " Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588238926-23964-2-git-send-email-fabrice.gasnier@st.com \
--to=fabrice.gasnier@st.com \
--cc=alexandre.torgue@st.com \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).