linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: Rob Herring <robh+dt@kernel.org>, Sebastian Reichel <sre@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: [PATCH v2 04/11] power: bq25890: protect view of the chip's state
Date: Sun, 03 May 2020 17:21:11 +0200	[thread overview]
Message-ID: <3291ca81bf8eb1b0401579ae08e7835e71dfc1ff.1588517058.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1588517058.git.mirq-linux@rere.qmqm.pl>

Extend bq->lock over whole updating of the chip's state. Might get
useful later for switching ADC modes correctly.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/power/supply/bq25890_charger.c | 82 ++++++++------------------
 1 file changed, 26 insertions(+), 56 deletions(-)

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index c4a69fd69f34..9339e216651f 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -510,74 +510,50 @@ static int bq25890_get_chip_state(struct bq25890_device *bq,
 	return 0;
 }
 
-static bool bq25890_state_changed(struct bq25890_device *bq,
-				  struct bq25890_state *new_state)
-{
-	struct bq25890_state old_state;
-
-	mutex_lock(&bq->lock);
-	old_state = bq->state;
-	mutex_unlock(&bq->lock);
-
-	return (old_state.chrg_status != new_state->chrg_status ||
-		old_state.chrg_fault != new_state->chrg_fault	||
-		old_state.online != new_state->online		||
-		old_state.bat_fault != new_state->bat_fault	||
-		old_state.boost_fault != new_state->boost_fault ||
-		old_state.vsys_status != new_state->vsys_status);
-}
-
-static void bq25890_handle_state_change(struct bq25890_device *bq,
-					struct bq25890_state *new_state)
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
 {
+	struct bq25890_state new_state;
 	int ret;
-	struct bq25890_state old_state;
 
-	mutex_lock(&bq->lock);
-	old_state = bq->state;
-	mutex_unlock(&bq->lock);
+	ret = bq25890_get_chip_state(bq, &new_state);
+	if (ret < 0)
+		return IRQ_NONE;
 
-	if (!new_state->online) {			     /* power removed */
+	if (!memcmp(&bq->state, &new_state, sizeof(new_state)))
+		return IRQ_NONE;
+
+	if (!new_state.online && bq->state.online) {	    /* power removed */
 		/* disable ADC */
 		ret = bq25890_field_write(bq, F_CONV_START, 0);
 		if (ret < 0)
 			goto error;
-	} else if (!old_state.online) {			    /* power inserted */
+	} else if (new_state.online && !bq->state.online) { /* power inserted */
 		/* enable ADC, to have control of charge current/voltage */
 		ret = bq25890_field_write(bq, F_CONV_START, 1);
 		if (ret < 0)
 			goto error;
 	}
 
-	return;
+	bq->state = new_state;
+	power_supply_changed(bq->charger);
 
+	return IRQ_HANDLED;
 error:
-	dev_err(bq->dev, "Error communicating with the chip.\n");
+	dev_err(bq->dev, "Error communicating with the chip: %pe\n",
+		ERR_PTR(ret));
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
 {
 	struct bq25890_device *bq = private;
-	int ret;
-	struct bq25890_state state;
-
-	ret = bq25890_get_chip_state(bq, &state);
-	if (ret < 0)
-		goto handled;
-
-	if (!bq25890_state_changed(bq, &state))
-		goto handled;
-
-	bq25890_handle_state_change(bq, &state);
+	irqreturn_t ret;
 
 	mutex_lock(&bq->lock);
-	bq->state = state;
+	ret = __bq25890_handle_irq(bq);
 	mutex_unlock(&bq->lock);
 
-	power_supply_changed(bq->charger);
-
-handled:
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static int bq25890_chip_reset(struct bq25890_device *bq)
@@ -607,7 +583,6 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 {
 	int ret;
 	int i;
-	struct bq25890_state state;
 
 	const struct {
 		enum bq25890_fields id;
@@ -655,16 +630,12 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 		return ret;
 	}
 
-	ret = bq25890_get_chip_state(bq, &state);
+	ret = bq25890_get_chip_state(bq, &bq->state);
 	if (ret < 0) {
 		dev_dbg(bq->dev, "Get state failed %d\n", ret);
 		return ret;
 	}
 
-	mutex_lock(&bq->lock);
-	bq->state = state;
-	mutex_unlock(&bq->lock);
-
 	return 0;
 }
 
@@ -1001,19 +972,16 @@ static int bq25890_suspend(struct device *dev)
 static int bq25890_resume(struct device *dev)
 {
 	int ret;
-	struct bq25890_state state;
 	struct bq25890_device *bq = dev_get_drvdata(dev);
 
-	ret = bq25890_get_chip_state(bq, &state);
+	mutex_lock(&bq->lock);
+
+	ret = bq25890_get_chip_state(bq, &bq->state);
 	if (ret < 0)
 		return ret;
 
-	mutex_lock(&bq->lock);
-	bq->state = state;
-	mutex_unlock(&bq->lock);
-
 	/* Re-enable ADC only if charger is plugged in. */
-	if (state.online) {
+	if (bq->state.online) {
 		ret = bq25890_field_write(bq, F_CONV_START, 1);
 		if (ret < 0)
 			return ret;
@@ -1022,6 +990,8 @@ static int bq25890_resume(struct device *dev)
 	/* signal userspace, maybe state changed while suspended */
 	power_supply_changed(bq->charger);
 
+	mutex_unlock(&bq->lock);
+
 	return 0;
 }
 #endif
-- 
2.20.1


  parent reply	other threads:[~2020-05-03 15:21 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-03 15:21 [PATCH v2 00/11] power: supply: bq25890: fix and extend Michał Mirosław
2020-05-03 15:21 ` [PATCH v2 03/11] power: bq25890: make property table const Michał Mirosław
2020-05-03 19:55   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 01/11] power: bq25890: remove redundant I2C bus check Michał Mirosław
2020-05-03 19:56   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 02/11] power: bq25890: simplify chip name property getter Michał Mirosław
2020-05-03 19:55   ` Sebastian Reichel
2020-05-03 15:21 ` Michał Mirosław [this message]
2020-05-03 21:10   ` [PATCH v2 04/11] power: bq25890: protect view of the chip's state Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 05/11] power: bq25890: fix ADC mode configuration Michał Mirosław
2020-05-03 20:01   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 07/11] power: bq25890: implement CHARGE_TYPE property Michał Mirosław
2020-05-03 21:14   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 06/11] power: bq25890: update state on property read Michał Mirosław
2020-05-03 21:14   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 09/11] power: bq25890: implement INPUT_CURRENT_LIMIT property Michał Mirosław
2020-05-03 21:16   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 08/11] power: bq25890: implement PRECHARGE_CURRENT property Michał Mirosław
2020-05-03 21:15   ` Sebastian Reichel
2020-05-03 15:21 ` [PATCH v2 10/11] power: bq25890: support IBAT compensation Michał Mirosław
2020-05-03 15:21 ` [PATCH v2 11/11] power: bq25890: document IBAT compensation DT properties Michał Mirosław

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3291ca81bf8eb1b0401579ae08e7835e71dfc1ff.1588517058.git.mirq-linux@rere.qmqm.pl \
    --to=mirq-linux@rere.qmqm.pl \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).