From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Michael Turquette <mturquette@baylibre.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/3] clk: at91: optimize pmc data allocation
Date: Tue, 05 May 2020 00:37:56 +0200 [thread overview]
Message-ID: <fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1588630999.git.mirq-linux@rere.qmqm.pl>
Alloc whole data structure in one block. This makes the code shorter,
more efficient and easier to extend in following patch.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
v2: rebase and update to clk/clk-at91 branch
v3: use struct_size() and C99 trailing array
as suggested by Stephen Boyd
v4: fixed sign-off
v5: no changes
v6: no changes
v7: pull all pmc_data_free() from second patch (a rebase artifact)
---
drivers/clk/at91/at91rm9200.c | 2 +-
drivers/clk/at91/at91sam9260.c | 2 +-
drivers/clk/at91/at91sam9g45.c | 2 +-
drivers/clk/at91/at91sam9n12.c | 2 +-
drivers/clk/at91/at91sam9rl.c | 2 +-
drivers/clk/at91/at91sam9x5.c | 2 +-
drivers/clk/at91/pmc.c | 34 ++++++++--------------------------
drivers/clk/at91/pmc.h | 3 ++-
drivers/clk/at91/sam9x60.c | 2 +-
drivers/clk/at91/sama5d2.c | 2 +-
drivers/clk/at91/sama5d3.c | 2 +-
drivers/clk/at91/sama5d4.c | 2 +-
12 files changed, 20 insertions(+), 37 deletions(-)
diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
index c44a431b6c97..6f4e1151553d 100644
--- a/drivers/clk/at91/at91rm9200.c
+++ b/drivers/clk/at91/at91rm9200.c
@@ -187,7 +187,7 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(at91rm9200_pmc);
+ kfree(at91rm9200_pmc);
}
/*
* While the TCB can be used as the clocksource, the system timer is most likely
diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index a9d4234758d7..946f03a09858 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -462,7 +462,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
return;
err_free:
- pmc_data_free(at91sam9260_pmc);
+ kfree(at91sam9260_pmc);
}
static void __init at91sam9260_pmc_setup(struct device_node *np)
diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
index 38a7d2d2df0c..53e8252b8a63 100644
--- a/drivers/clk/at91/at91sam9g45.c
+++ b/drivers/clk/at91/at91sam9g45.c
@@ -210,7 +210,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(at91sam9g45_pmc);
+ kfree(at91sam9g45_pmc);
}
/*
* The TCB is used as the clocksource so its clock is needed early. This means
diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
index 8bb39d2ba84b..f3ae1cd3cb8d 100644
--- a/drivers/clk/at91/at91sam9n12.c
+++ b/drivers/clk/at91/at91sam9n12.c
@@ -228,7 +228,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(at91sam9n12_pmc);
+ kfree(at91sam9n12_pmc);
}
/*
* The TCB is used as the clocksource so its clock is needed early. This means
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 77fe83a73bf4..cc739d214ae3 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -166,6 +166,6 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(at91sam9rl_pmc);
+ kfree(at91sam9rl_pmc);
}
CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 086cf0b4955c..aac99d699568 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -278,7 +278,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
return;
err_free:
- pmc_data_free(at91sam9x5_pmc);
+ kfree(at91sam9x5_pmc);
}
static void __init at91sam9g15_pmc_setup(struct device_node *np)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index b71515acdec1..ac46ea1b9fda 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -76,48 +76,30 @@ struct clk_hw *of_clk_hw_pmc_get(struct of_phandle_args *clkspec, void *data)
return ERR_PTR(-EINVAL);
}
-void pmc_data_free(struct pmc_data *pmc_data)
-{
- kfree(pmc_data->chws);
- kfree(pmc_data->shws);
- kfree(pmc_data->phws);
- kfree(pmc_data->ghws);
-}
-
struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
unsigned int nperiph, unsigned int ngck)
{
- struct pmc_data *pmc_data = kzalloc(sizeof(*pmc_data), GFP_KERNEL);
+ unsigned int num_clks = ncore + nsystem + nperiph + ngck;
+ struct pmc_data *pmc_data;
+ pmc_data = kzalloc(struct_size(pmc_data, hwtable, num_clks),
+ GFP_KERNEL);
if (!pmc_data)
return NULL;
pmc_data->ncore = ncore;
- pmc_data->chws = kcalloc(ncore, sizeof(struct clk_hw *), GFP_KERNEL);
- if (!pmc_data->chws)
- goto err;
+ pmc_data->chws = pmc_data->hwtable;
pmc_data->nsystem = nsystem;
- pmc_data->shws = kcalloc(nsystem, sizeof(struct clk_hw *), GFP_KERNEL);
- if (!pmc_data->shws)
- goto err;
+ pmc_data->shws = pmc_data->chws + ncore;
pmc_data->nperiph = nperiph;
- pmc_data->phws = kcalloc(nperiph, sizeof(struct clk_hw *), GFP_KERNEL);
- if (!pmc_data->phws)
- goto err;
+ pmc_data->phws = pmc_data->shws + nsystem;
pmc_data->ngck = ngck;
- pmc_data->ghws = kcalloc(ngck, sizeof(struct clk_hw *), GFP_KERNEL);
- if (!pmc_data->ghws)
- goto err;
+ pmc_data->ghws = pmc_data->phws + nperiph;
return pmc_data;
-
-err:
- pmc_data_free(pmc_data);
-
- return NULL;
}
#ifdef CONFIG_PM
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 9b8db9cdcda5..fc3ef772b9d9 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -24,6 +24,8 @@ struct pmc_data {
struct clk_hw **phws;
unsigned int ngck;
struct clk_hw **ghws;
+
+ struct clk_hw *hwtable[];
};
struct clk_range {
@@ -95,7 +97,6 @@ struct clk_pcr_layout {
#define nck(a) (a[ARRAY_SIZE(a) - 1].id + 1)
struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
unsigned int nperiph, unsigned int ngck);
-void pmc_data_free(struct pmc_data *pmc_data);
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index cc19e8fb83be..a7d4f648db26 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -299,7 +299,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(sam9x60_pmc);
+ kfree(sam9x60_pmc);
}
/* Some clks are used for a clocksource */
CLK_OF_DECLARE(sam9x60_pmc, "microchip,sam9x60-pmc", sam9x60_pmc_setup);
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index ff7e3f727082..b2560670e5af 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -350,6 +350,6 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(sama5d2_pmc);
+ kfree(sama5d2_pmc);
}
CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
index 88506f909c08..914e6f225510 100644
--- a/drivers/clk/at91/sama5d3.c
+++ b/drivers/clk/at91/sama5d3.c
@@ -231,7 +231,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(sama5d3_pmc);
+ kfree(sama5d3_pmc);
}
/*
* The TCB is used as the clocksource so its clock is needed early. This means
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index a6dee4a3b6e4..4ca9a4619500 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -267,6 +267,6 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
return;
err_free:
- pmc_data_free(sama5d4_pmc);
+ kfree(sama5d4_pmc);
}
CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
--
2.20.1
next prev parent reply other threads:[~2020-05-04 22:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-04 22:37 [PATCH v7 0/3] clk: at91: support configuring more clocks via DT Michał Mirosław
2020-05-04 22:37 ` Michał Mirosław [this message]
2020-05-05 15:27 ` [PATCH v7 1/3] clk: at91: optimize pmc data allocation Alexandre Belloni
2020-05-04 22:37 ` [PATCH v7 2/3] clk: at91: allow setting PCKx parent via DT Michał Mirosław
2020-05-05 15:32 ` Alexandre Belloni
2020-05-04 22:37 ` [PATCH v7 3/3] clk: at91: allow setting all PMC clock parents " Michał Mirosław
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl \
--to=mirq-linux@rere.qmqm.pl \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).