[1/3] MIPS: Remove support for LASAT
diff mbox series

Message ID 20200507134747.7403-1-tsbogend@alpha.franken.de
State In Next
Commit 10760dde9be317a1abb426b2db9d6a698086cac9
Headers show
Series
  • [1/3] MIPS: Remove support for LASAT
Related show

Commit Message

Thomas Bogendoerfer May 7, 2020, 1:47 p.m. UTC
All LASAT has probably gone bad, so let's remove Linux support.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 arch/mips/Kbuild.platforms                      |   1 -
 arch/mips/Kconfig                               |  21 --
 arch/mips/Makefile                              |   7 -
 arch/mips/configs/lasat_defconfig               |  55 -----
 arch/mips/include/asm/lasat/ds1603.h            |  19 --
 arch/mips/include/asm/lasat/eeprom.h            |  18 --
 arch/mips/include/asm/lasat/head.h              |  23 --
 arch/mips/include/asm/lasat/lasat.h             | 245 -------------------
 arch/mips/include/asm/lasat/lasatint.h          |  15 --
 arch/mips/include/asm/lasat/picvue.h            |  16 --
 arch/mips/include/asm/lasat/serial.h            |  14 --
 arch/mips/include/asm/mach-lasat/irq.h          |  14 --
 arch/mips/include/asm/mach-lasat/mach-gt64120.h |  28 ---
 arch/mips/include/asm/nile4.h                   | 310 ------------------------
 arch/mips/lasat/Kconfig                         |  16 --
 arch/mips/lasat/Makefile                        |  15 --
 arch/mips/lasat/Platform                        |   7 -
 arch/mips/lasat/at93c.c                         | 148 -----------
 arch/mips/lasat/at93c.h                         |  19 --
 arch/mips/lasat/ds1603.c                        | 190 ---------------
 arch/mips/lasat/ds1603.h                        |  32 ---
 arch/mips/lasat/image/Makefile                  |  53 ----
 arch/mips/lasat/image/head.S                    |  32 ---
 arch/mips/lasat/image/romscript.normal          |  23 --
 arch/mips/lasat/interrupt.c                     | 119 ---------
 arch/mips/lasat/lasat_board.c                   | 268 --------------------
 arch/mips/lasat/lasat_models.h                  |  68 ------
 arch/mips/lasat/picvue.c                        | 242 ------------------
 arch/mips/lasat/picvue.h                        |  45 ----
 arch/mips/lasat/picvue_proc.c                   | 208 ----------------
 arch/mips/lasat/prom.c                          | 126 ----------
 arch/mips/lasat/prom.h                          |   8 -
 arch/mips/lasat/reset.c                         |  48 ----
 arch/mips/lasat/serial.c                        |  80 ------
 arch/mips/lasat/setup.c                         | 141 -----------
 arch/mips/lasat/sysctl.c                        | 268 --------------------
 arch/mips/pci/Makefile                          |   2 -
 arch/mips/pci/ops-nile4.c                       | 136 -----------
 arch/mips/pci/pci-lasat.c                       |  88 -------
 39 files changed, 3168 deletions(-)
 delete mode 100644 arch/mips/configs/lasat_defconfig
 delete mode 100644 arch/mips/include/asm/lasat/ds1603.h
 delete mode 100644 arch/mips/include/asm/lasat/eeprom.h
 delete mode 100644 arch/mips/include/asm/lasat/head.h
 delete mode 100644 arch/mips/include/asm/lasat/lasat.h
 delete mode 100644 arch/mips/include/asm/lasat/lasatint.h
 delete mode 100644 arch/mips/include/asm/lasat/picvue.h
 delete mode 100644 arch/mips/include/asm/lasat/serial.h
 delete mode 100644 arch/mips/include/asm/mach-lasat/irq.h
 delete mode 100644 arch/mips/include/asm/mach-lasat/mach-gt64120.h
 delete mode 100644 arch/mips/include/asm/nile4.h
 delete mode 100644 arch/mips/lasat/Kconfig
 delete mode 100644 arch/mips/lasat/Makefile
 delete mode 100644 arch/mips/lasat/Platform
 delete mode 100644 arch/mips/lasat/at93c.c
 delete mode 100644 arch/mips/lasat/at93c.h
 delete mode 100644 arch/mips/lasat/ds1603.c
 delete mode 100644 arch/mips/lasat/ds1603.h
 delete mode 100644 arch/mips/lasat/image/Makefile
 delete mode 100644 arch/mips/lasat/image/head.S
 delete mode 100644 arch/mips/lasat/image/romscript.normal
 delete mode 100644 arch/mips/lasat/interrupt.c
 delete mode 100644 arch/mips/lasat/lasat_board.c
 delete mode 100644 arch/mips/lasat/lasat_models.h
 delete mode 100644 arch/mips/lasat/picvue.c
 delete mode 100644 arch/mips/lasat/picvue.h
 delete mode 100644 arch/mips/lasat/picvue_proc.c
 delete mode 100644 arch/mips/lasat/prom.c
 delete mode 100644 arch/mips/lasat/prom.h
 delete mode 100644 arch/mips/lasat/reset.c
 delete mode 100644 arch/mips/lasat/serial.c
 delete mode 100644 arch/mips/lasat/setup.c
 delete mode 100644 arch/mips/lasat/sysctl.c
 delete mode 100644 arch/mips/pci/ops-nile4.c
 delete mode 100644 arch/mips/pci/pci-lasat.c

Comments

Thomas Bogendoerfer May 11, 2020, 3:57 p.m. UTC | #1
On Thu, May 07, 2020 at 03:47:41PM +0200, Thomas Bogendoerfer wrote:
> All LASAT has probably gone bad, so let's remove Linux support.
> 
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

applied patches 1-3 to mips-next.

Thomas.

Patch
diff mbox series

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a69b272a3ab0..9f9b4164d4c9 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -16,7 +16,6 @@  platforms += generic
 platforms += jazz
 platforms += jz4740
 platforms += lantiq
-platforms += lasat
 platforms += loongson2ef
 platforms += loongson32
 platforms += loongson64
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9f15539a6342..0aaab09bdea6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -431,23 +431,6 @@  config LANTIQ
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 
-config LASAT
-	bool "LASAT Networks platforms"
-	select CEVT_R4K
-	select CRC32
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select PCI_GT64XXX_PCI0
-	select MIPS_NILE4
-	select R5000_CPU_SCACHE
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config MACH_LOONGSON32
 	bool "Loongson 32-bit family of machines"
 	select SYS_SUPPORTS_ZBOOT
@@ -1091,7 +1074,6 @@  source "arch/mips/generic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
-source "arch/mips/lasat/Kconfig"
 source "arch/mips/pic32/Kconfig"
 source "arch/mips/pistachio/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
@@ -1215,9 +1197,6 @@  config MIPS_BONITO64
 config MIPS_MSC
 	bool
 
-config MIPS_NILE4
-	bool
-
 config SYNC_R4K
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index b6ee29e4565a..ef15caa4d320 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -370,12 +370,6 @@  ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
 bootz-y			+= uzImage.bin
 endif
 
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
-		$(bootvars-y) $@
-endif
-
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -441,7 +435,6 @@  archclean:
 	$(Q)$(MAKE) $(clean)=arch/mips/boot
 	$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
 	$(Q)$(MAKE) $(clean)=arch/mips/boot/tools
-	$(Q)$(MAKE) $(clean)=arch/mips/lasat
 
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
deleted file mode 100644
index 00cf461db971..000000000000
--- a/arch/mips/configs/lasat_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@ 
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_LASAT=y
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
-CONFIG_HZ_1000=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
deleted file mode 100644
index ab833be9637d..000000000000
--- a/arch/mips/include/asm/lasat/ds1603.h
+++ /dev/null
@@ -1,19 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* Lasat 100	*/
-#define DS1603_REG_100		(KSEG1ADDR(0x1c810000))
-#define DS1603_RST_100		(1 << 2)
-#define DS1603_CLK_100		(1 << 0)
-#define DS1603_DATA_SHIFT_100	1
-#define DS1603_DATA_100		(1 << DS1603_DATA_SHIFT_100)
-
-/* Lasat 200	*/
-#define DS1603_REG_200		(KSEG1ADDR(0x11000000))
-#define DS1603_RST_200		(1 << 3)
-#define DS1603_CLK_200		(1 << 4)
-#define DS1603_DATA_200		(1 << 5)
-
-#define DS1603_DATA_REG_200		(DS1603_REG_200 + 0x10000)
-#define DS1603_DATA_READ_SHIFT_200	9
-#define DS1603_DATA_READ_200	(1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
deleted file mode 100644
index 24001a5cbb11..000000000000
--- a/arch/mips/include/asm/lasat/eeprom.h
+++ /dev/null
@@ -1,18 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* lasat 100 */
-#define AT93C_REG_100		    KSEG1ADDR(0x1c810000)
-#define AT93C_RDATA_REG_100	    AT93C_REG_100
-#define AT93C_RDATA_SHIFT_100	    4
-#define AT93C_WDATA_SHIFT_100	    4
-#define AT93C_CS_M_100		    (1 << 5)
-#define AT93C_CLK_M_100		    (1 << 3)
-
-/* lasat 200 */
-#define AT93C_REG_200		KSEG1ADDR(0x11000000)
-#define AT93C_RDATA_REG_200	(AT93C_REG_200+0x10000)
-#define AT93C_RDATA_SHIFT_200	8
-#define AT93C_WDATA_SHIFT_200	2
-#define AT93C_CS_M_200		(1 << 0)
-#define AT93C_CLK_M_200		(1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
deleted file mode 100644
index 20b0ecedd4b5..000000000000
--- a/arch/mips/include/asm/lasat/head.h
+++ /dev/null
@@ -1,23 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Image header stuff
- */
-#ifndef _HEAD_H
-#define _HEAD_H
-
-#define LASAT_K_MAGIC0_VAL	0xfedeabba
-#define LASAT_K_MAGIC1_VAL	0x00bedead
-
-#ifndef _LANGUAGE_ASSEMBLY
-#include <linux/types.h>
-struct bootloader_header {
-	u32 magic[2];
-	u32 version;
-	u32 image_start;
-	u32 image_size;
-	u32 kernel_start;
-	u32 kernel_entry;
-};
-#endif
-
-#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
deleted file mode 100644
index 483be606960d..000000000000
--- a/arch/mips/include/asm/lasat/lasat.h
+++ /dev/null
@@ -1,245 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * lasat.h
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Configuration for LASAT boards, loads the appropriate include files.
- */
-#ifndef _LASAT_H
-#define _LASAT_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-extern struct lasat_misc {
-	volatile u32 *reset_reg;
-	volatile u32 *flash_wp_reg;
-	u32 flash_wp_bit;
-} *lasat_misc;
-
-enum lasat_mtdparts {
-	LASAT_MTD_BOOTLOADER,
-	LASAT_MTD_SERVICE,
-	LASAT_MTD_NORMAL,
-	LASAT_MTD_CONFIG,
-	LASAT_MTD_FS,
-	LASAT_MTD_LAST
-};
-
-/*
- * The format of the data record in the EEPROM.
- * See the LASAT Hardware Configuration field specification for a detailed
- * description of the config field.
- */
-#include <linux/types.h>
-
-#define LASAT_EEPROM_VERSION 7
-struct lasat_eeprom_struct {
-	unsigned int  version;
-	unsigned int  cfg[3];
-	unsigned char hwaddr[6];
-	unsigned char print_partno[12];
-	unsigned char term0;
-	unsigned char print_serial[14];
-	unsigned char term1;
-	unsigned char prod_partno[12];
-	unsigned char term2;
-	unsigned char prod_serial[14];
-	unsigned char term3;
-	unsigned char passwd_hash[16];
-	unsigned char pwdnull;
-	unsigned char vendid;
-	unsigned char ts_ref;
-	unsigned char ts_signoff;
-	unsigned char reserved[11];
-	unsigned char debugaccess;
-	unsigned short prid;
-	unsigned int  serviceflag;
-	unsigned int  ipaddr;
-	unsigned int  netmask;
-	unsigned int  crc32;
-};
-
-struct lasat_eeprom_struct_pre7 {
-	unsigned int  version;
-	unsigned int  flags[3];
-	unsigned char hwaddr0[6];
-	unsigned char hwaddr1[6];
-	unsigned char print_partno[9];
-	unsigned char term0;
-	unsigned char print_serial[14];
-	unsigned char term1;
-	unsigned char prod_partno[9];
-	unsigned char term2;
-	unsigned char prod_serial[14];
-	unsigned char term3;
-	unsigned char passwd_hash[24];
-	unsigned char pwdnull;
-	unsigned char vendor;
-	unsigned char ts_ref;
-	unsigned char ts_signoff;
-	unsigned char reserved[6];
-	unsigned int  writecount;
-	unsigned int  ipaddr;
-	unsigned int  netmask;
-	unsigned int  crc32;
-};
-
-/* Configuration descriptor encoding - see the doc for details */
-
-#define LASAT_W0_DSCTYPE(v)		(((v))	       & 0xf)
-#define LASAT_W0_BMID(v)		(((v) >> 0x04) & 0xf)
-#define LASAT_W0_CPUTYPE(v)		(((v) >> 0x08) & 0xf)
-#define LASAT_W0_BUSSPEED(v)		(((v) >> 0x0c) & 0xf)
-#define LASAT_W0_CPUCLK(v)		(((v) >> 0x10) & 0xf)
-#define LASAT_W0_SDRAMBANKSZ(v)		(((v) >> 0x14) & 0xf)
-#define LASAT_W0_SDRAMBANKS(v)		(((v) >> 0x18) & 0xf)
-#define LASAT_W0_L2CACHE(v)		(((v) >> 0x1c) & 0xf)
-
-#define LASAT_W1_EDHAC(v)		(((v))	       & 0xf)
-#define LASAT_W1_HIFN(v)		(((v) >> 0x04) & 0x1)
-#define LASAT_W1_ISDN(v)		(((v) >> 0x05) & 0x1)
-#define LASAT_W1_IDE(v)			(((v) >> 0x06) & 0x1)
-#define LASAT_W1_HDLC(v)		(((v) >> 0x07) & 0x1)
-#define LASAT_W1_USVERSION(v)		(((v) >> 0x08) & 0x1)
-#define LASAT_W1_4MACS(v)		(((v) >> 0x09) & 0x1)
-#define LASAT_W1_EXTSERIAL(v)		(((v) >> 0x0a) & 0x1)
-#define LASAT_W1_FLASHSIZE(v)		(((v) >> 0x0c) & 0xf)
-#define LASAT_W1_PCISLOTS(v)		(((v) >> 0x10) & 0xf)
-#define LASAT_W1_PCI1OPT(v)		(((v) >> 0x14) & 0xf)
-#define LASAT_W1_PCI2OPT(v)		(((v) >> 0x18) & 0xf)
-#define LASAT_W1_PCI3OPT(v)		(((v) >> 0x1c) & 0xf)
-
-/* Routines specific to LASAT boards */
-
-#define LASAT_BMID_MASQUERADE2		0
-#define LASAT_BMID_MASQUERADEPRO	1
-#define LASAT_BMID_SAFEPIPE25		2
-#define LASAT_BMID_SAFEPIPE50		3
-#define LASAT_BMID_SAFEPIPE100		4
-#define LASAT_BMID_SAFEPIPE5000		5
-#define LASAT_BMID_SAFEPIPE7000		6
-#define LASAT_BMID_SAFEPIPE1000		7
-#if 0
-#define LASAT_BMID_SAFEPIPE30		7
-#define LASAT_BMID_SAFEPIPE5100		8
-#define LASAT_BMID_SAFEPIPE7100		9
-#endif
-#define LASAT_BMID_UNKNOWN		0xf
-#define LASAT_MAX_BMID_NAMES		9   /* no larger than 15! */
-
-#define LASAT_HAS_EDHAC			(1 << 0)
-#define LASAT_EDHAC_FAST		(1 << 1)
-#define LASAT_HAS_EADI			(1 << 2)
-#define LASAT_HAS_HIFN			(1 << 3)
-#define LASAT_HAS_ISDN			(1 << 4)
-#define LASAT_HAS_LEASEDLINE_IF		(1 << 5)
-#define LASAT_HAS_HDC			(1 << 6)
-
-#define LASAT_PRID_MASQUERADE2		0
-#define LASAT_PRID_MASQUERADEPRO	1
-#define LASAT_PRID_SAFEPIPE25		2
-#define LASAT_PRID_SAFEPIPE50		3
-#define LASAT_PRID_SAFEPIPE100		4
-#define LASAT_PRID_SAFEPIPE5000		5
-#define LASAT_PRID_SAFEPIPE7000		6
-#define LASAT_PRID_SAFEPIPE30		7
-#define LASAT_PRID_SAFEPIPE5100		8
-#define LASAT_PRID_SAFEPIPE7100		9
-
-#define LASAT_PRID_SAFEPIPE1110		10
-#define LASAT_PRID_SAFEPIPE3020		11
-#define LASAT_PRID_SAFEPIPE3030		12
-#define LASAT_PRID_SAFEPIPE5020		13
-#define LASAT_PRID_SAFEPIPE5030		14
-#define LASAT_PRID_SAFEPIPE1120		15
-#define LASAT_PRID_SAFEPIPE1130		16
-#define LASAT_PRID_SAFEPIPE6010		17
-#define LASAT_PRID_SAFEPIPE6110		18
-#define LASAT_PRID_SAFEPIPE6210		19
-#define LASAT_PRID_SAFEPIPE1020		20
-#define LASAT_PRID_SAFEPIPE1040		21
-#define LASAT_PRID_SAFEPIPE1060		22
-
-struct lasat_info {
-	unsigned int  li_cpu_hz;
-	unsigned int  li_bus_hz;
-	unsigned int  li_bmid;
-	unsigned int  li_memsize;
-	unsigned int  li_flash_size;
-	unsigned int  li_prid;
-	unsigned char li_bmstr[16];
-	unsigned char li_namestr[32];
-	unsigned char li_typestr[16];
-	/* Info on the Flash layout */
-	unsigned int  li_flash_base;
-	unsigned long li_flashpart_base[LASAT_MTD_LAST];
-	unsigned long li_flashpart_size[LASAT_MTD_LAST];
-	struct lasat_eeprom_struct li_eeprom_info;
-	unsigned int  li_eeprom_upgrade_version;
-	unsigned int  li_debugaccess;
-};
-
-extern struct lasat_info lasat_board_info;
-
-static inline unsigned long lasat_flash_partition_start(int partno)
-{
-	if (partno < 0 || partno >= LASAT_MTD_LAST)
-		return 0;
-
-	return lasat_board_info.li_flashpart_base[partno];
-}
-
-static inline unsigned long lasat_flash_partition_size(int partno)
-{
-	if (partno < 0 || partno >= LASAT_MTD_LAST)
-		return 0;
-
-	return lasat_board_info.li_flashpart_size[partno];
-}
-
-/* Called from setup() to initialize the global board_info struct */
-extern int lasat_init_board_info(void);
-
-/* Write the modified EEPROM info struct */
-extern void lasat_write_eeprom_info(void);
-
-#define N_MACHTYPES		2
-/* for calibration of delays */
-
-/* the lasat_ndelay function is necessary because it is used at an
- * early stage of the boot process where ndelay is not calibrated.
- * It is used for the bit-banging rtc and eeprom drivers */
-
-#include <linux/delay.h>
-#include <linux/smp.h>
-
-/* calculating with the slowest board with 100 MHz clock */
-#define LASAT_100_DIVIDER 20
-/* All 200's run at 250 MHz clock */
-#define LASAT_200_DIVIDER 8
-
-extern unsigned int lasat_ndelay_divider;
-
-static inline void lasat_ndelay(unsigned int ns)
-{
-	__delay(ns / lasat_ndelay_divider);
-}
-
-#define IS_LASAT_200()	   (current_cpu_data.cputype == CPU_R5000)
-
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-
-#define LASAT_SERVICEMODE_MAGIC_1     0xdeadbeef
-#define LASAT_SERVICEMODE_MAGIC_2     0xfedeabba
-
-/* Lasat 100 boards */
-#define LASAT_GT_BASE		(KSEG1ADDR(0x14000000))
-
-/* Lasat 200 boards */
-#define Vrc5074_PHYS_BASE	0x1fa00000
-#define Vrc5074_BASE		(KSEG1ADDR(Vrc5074_PHYS_BASE))
-#define PCI_WINDOW1		0x1a000000
-
-#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
deleted file mode 100644
index b2b346e0ca38..000000000000
--- a/arch/mips/include/asm/lasat/lasatint.h
+++ /dev/null
@@ -1,15 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LASAT_LASATINT_H
-#define __ASM_LASAT_LASATINT_H
-
-/* lasat 100 */
-#define LASAT_INT_STATUS_REG_100	(KSEG1ADDR(0x1c880000))
-#define LASAT_INT_MASK_REG_100		(KSEG1ADDR(0x1c890000))
-#define LASATINT_MASK_SHIFT_100		0
-
-/* lasat 200 */
-#define LASAT_INT_STATUS_REG_200	(KSEG1ADDR(0x1104003c))
-#define LASAT_INT_MASK_REG_200		(KSEG1ADDR(0x1104003c))
-#define LASATINT_MASK_SHIFT_200		16
-
-#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
deleted file mode 100644
index 99987c5a4b83..000000000000
--- a/arch/mips/include/asm/lasat/picvue.h
+++ /dev/null
@@ -1,16 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Lasat 100 */
-#define PVC_REG_100		KSEG1ADDR(0x1c820000)
-#define PVC_DATA_SHIFT_100	0
-#define PVC_DATA_M_100		0xFF
-#define PVC_E_100		(1 << 8)
-#define PVC_RW_100		(1 << 9)
-#define PVC_RS_100		(1 << 10)
-
-/* Lasat 200 */
-#define PVC_REG_200		KSEG1ADDR(0x11000000)
-#define PVC_DATA_SHIFT_200	24
-#define PVC_DATA_M_200		(0xFF << PVC_DATA_SHIFT_200)
-#define PVC_E_200		(1 << 16)
-#define PVC_RW_200		(1 << 17)
-#define PVC_RS_200		(1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
deleted file mode 100644
index 7b43d74089d1..000000000000
--- a/arch/mips/include/asm/lasat/serial.h
+++ /dev/null
@@ -1,14 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/lasat.h>
-
-/* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100		(7372800 / 16)
-#define LASAT_UART_REGS_BASE_100	0x1c8b0000
-#define LASAT_UART_REGS_SHIFT_100	2
-#define LASATINT_UART_100		16
-
-/* * LASAT 200 boards serial configuration */
-#define LASAT_BASE_BAUD_200		(100000000 / 16 / 12)
-#define LASAT_UART_REGS_BASE_200	(Vrc5074_PHYS_BASE + 0x0300)
-#define LASAT_UART_REGS_SHIFT_200	3
-#define LASATINT_UART_200		21
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
deleted file mode 100644
index e8994921779e..000000000000
--- a/arch/mips/include/asm/mach-lasat/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_MACH_LASAT_IRQ_H
-#define _ASM_MACH_LASAT_IRQ_H
-
-#define LASAT_CASCADE_IRQ	(MIPS_CPU_IRQ_BASE + 2)
-
-#define LASAT_IRQ_BASE		8
-#define LASAT_IRQ_END		23
-
-#define NR_IRQS			24
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
deleted file mode 100644
index 6666a8871a23..000000000000
--- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h
+++ /dev/null
@@ -1,28 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  This is a direct copy of the ev96100.h file, with a global
- * search and replace.	The numbers are the same.
- *
- *  The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
-#define _ASM_GT64120_LASAT_GT64120_DEP_H
-
-/*
- *   GT64120 config space base address on Lasat 100
- */
-#define GT64120_BASE	(KSEG1ADDR(0x14000000))
-
-/*
- *   PCI Bus allocation
- *
- *   (Guessing ...)
- */
-#define GT_PCI_MEM_BASE 0x12000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE	0x10000000UL
-#define GT_PCI_IO_SIZE	0x02000000UL
-#define GT_ISA_IO_BASE	PCI_IO_BASE
-
-#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
deleted file mode 100644
index 9d36b7823603..000000000000
--- a/arch/mips/include/asm/nile4.h
+++ /dev/null
@@ -1,310 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@linux-m68k.org>
- *		       Sony Software Development Center Europe (SDCE), Brussels
- *
- *  This file is based on the following documentation:
- *
- *	NEC Vrc 5074 System Controller Data Sheet, June 1998
- */
-
-#ifndef _ASM_NILE4_H
-#define _ASM_NILE4_H
-
-#define NILE4_BASE		0xbfa00000
-#define NILE4_SIZE		0x00200000		/* 2 MB */
-
-
-    /*
-     *	Physical Device Address Registers (PDARs)
-     */
-
-#define NILE4_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
-#define NILE4_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
-#define NILE4_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
-#define NILE4_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
-#define NILE4_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
-#define NILE4_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
-#define NILE4_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
-#define NILE4_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
-#define NILE4_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
-#define NILE4_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
-#define NILE4_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
-#define NILE4_INTCS	0x0070	/* Controller Internal Registers and Devices */
-				/* [R/W] */
-#define NILE4_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
-
-
-    /*
-     *	CPU Interface Registers
-     */
-
-#define NILE4_CPUSTAT	0x0080	/* CPU Status [R/W] */
-#define NILE4_INTCTRL	0x0088	/* Interrupt Control [R/W] */
-#define NILE4_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
-#define NILE4_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
-				/* Enable [R/W] */
-#define NILE4_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
-#define NILE4_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
-
-
-    /*
-     *	Memory-Interface Registers
-     */
-
-#define NILE4_MEMCTRL	0x00C0	/* Memory Control */
-#define NILE4_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
-#define NILE4_CHKERR	0x00D0	/* Memory Check Error Status [R] */
-
-
-    /*
-     *	PCI-Bus Registers
-     */
-
-#define NILE4_PCICTRL	0x00E0	/* PCI Control [R/W] */
-#define NILE4_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
-#define NILE4_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
-#define NILE4_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
-#define NILE4_PCIERR	0x00B8	/* PCI Error [R/W] */
-
-
-    /*
-     *	Local-Bus Registers
-     */
-
-#define NILE4_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
-#define NILE4_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
-#define NILE4_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
-#define NILE4_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
-#define NILE4_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
-#define NILE4_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
-#define NILE4_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
-#define NILE4_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
-#define NILE4_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
-				/* Enables [R/W] */
-#define NILE4_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
-#define NILE4_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
-
-
-    /*
-     *	DMA Registers
-     */
-
-#define NILE4_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
-#define NILE4_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
-#define NILE4_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
-#define NILE4_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
-#define NILE4_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
-#define NILE4_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
-
-
-    /*
-     *	Timer Registers
-     */
-
-#define NILE4_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
-#define NILE4_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
-#define NILE4_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
-#define NILE4_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
-#define NILE4_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
-#define NILE4_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
-#define NILE4_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
-#define NILE4_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
-
-
-    /*
-     *	PCI Configuration Space Registers
-     */
-
-#define NILE4_PCI_BASE	0x0200
-
-#define NILE4_VID	0x0200	/* PCI Vendor ID [R] */
-#define NILE4_DID	0x0202	/* PCI Device ID [R] */
-#define NILE4_PCICMD	0x0204	/* PCI Command [R/W] */
-#define NILE4_PCISTS	0x0206	/* PCI Status [R/W] */
-#define NILE4_REVID	0x0208	/* PCI Revision ID [R] */
-#define NILE4_CLASS	0x0209	/* PCI Class Code [R] */
-#define NILE4_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
-#define NILE4_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
-#define NILE4_HTYPE	0x020E	/* PCI Header Type [R] */
-#define NILE4_BIST	0x020F	/* BIST [R] (unimplemented) */
-#define NILE4_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
-#define NILE4_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
-#define NILE4_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
-#define NILE4_CIS	0x0228	/* PCI Cardbus CIS Pointer [R] */
-				/* (unimplemented) */
-#define NILE4_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
-#define NILE4_SSID	0x022E	/* PCI Sub-System ID [R/W] */
-#define NILE4_ROM	0x0230	/* Expansion ROM Base Address [R] */
-				/* (unimplemented) */
-#define NILE4_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
-#define NILE4_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
-#define NILE4_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
-#define NILE4_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
-#define NILE4_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
-#define NILE4_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
-#define NILE4_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
-#define NILE4_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
-#define NILE4_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
-#define NILE4_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
-#define NILE4_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
-#define NILE4_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
-
-
-    /*
-     *	Serial-Port Registers
-     */
-
-#define NILE4_UART_BASE 0x0300
-
-#define NILE4_UARTRBR	0x0300	/* UART Receiver Data Buffer [R] */
-#define NILE4_UARTTHR	0x0300	/* UART Transmitter Data Holding [W] */
-#define NILE4_UARTIER	0x0308	/* UART Interrupt Enable [R/W] */
-#define NILE4_UARTDLL	0x0300	/* UART Divisor Latch LSB [R/W] */
-#define NILE4_UARTDLM	0x0308	/* UART Divisor Latch MSB [R/W] */
-#define NILE4_UARTIIR	0x0310	/* UART Interrupt ID [R] */
-#define NILE4_UARTFCR	0x0310	/* UART FIFO Control [W] */
-#define NILE4_UARTLCR	0x0318	/* UART Line Control [R/W] */
-#define NILE4_UARTMCR	0x0320	/* UART Modem Control [R/W] */
-#define NILE4_UARTLSR	0x0328	/* UART Line Status [R/W] */
-#define NILE4_UARTMSR	0x0330	/* UART Modem Status [R/W] */
-#define NILE4_UARTSCR	0x0338	/* UART Scratch [R/W] */
-
-#define NILE4_UART_BASE_BAUD	520833	/* 100 MHz / 12 / 16 */
-
-
-    /*
-     *	Interrupt Lines
-     */
-
-#define NILE4_INT_CPCE	0	/* CPU-Interface Parity-Error Interrupt */
-#define NILE4_INT_CNTD	1	/* CPU No-Target Decode Interrupt */
-#define NILE4_INT_MCE	2	/* Memory-Check Error Interrupt */
-#define NILE4_INT_DMA	3	/* DMA Controller Interrupt */
-#define NILE4_INT_UART	4	/* UART Interrupt */
-#define NILE4_INT_WDOG	5	/* Watchdog Timer Interrupt */
-#define NILE4_INT_GPT	6	/* General-Purpose Timer Interrupt */
-#define NILE4_INT_LBRTD 7	/* Local-Bus Ready Timer Interrupt */
-#define NILE4_INT_INTA	8	/* PCI Interrupt Signal INTA# */
-#define NILE4_INT_INTB	9	/* PCI Interrupt Signal INTB# */
-#define NILE4_INT_INTC	10	/* PCI Interrupt Signal INTC# */
-#define NILE4_INT_INTD	11	/* PCI Interrupt Signal INTD# */
-#define NILE4_INT_INTE	12	/* PCI Interrupt Signal INTE# (ISA cascade) */
-#define NILE4_INT_RESV	13	/* Reserved */
-#define NILE4_INT_PCIS	14	/* PCI SERR# Interrupt */
-#define NILE4_INT_PCIE	15	/* PCI Internal Error Interrupt */
-
-
-    /*
-     *	Nile 4 Register Access
-     */
-
-static inline void nile4_sync(void)
-{
-    volatile u32 *p = (volatile u32 *)0xbfc00000;
-    (void)(*p);
-}
-
-static inline void nile4_out32(u32 offset, u32 val)
-{
-    *(volatile u32 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u32 nile4_in32(u32 offset)
-{
-    u32 val = *(volatile u32 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-static inline void nile4_out16(u32 offset, u16 val)
-{
-    *(volatile u16 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u16 nile4_in16(u32 offset)
-{
-    u16 val = *(volatile u16 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-static inline void nile4_out8(u32 offset, u8 val)
-{
-    *(volatile u8 *)(NILE4_BASE+offset) = val;
-    nile4_sync();
-}
-
-static inline u8 nile4_in8(u32 offset)
-{
-    u8 val = *(volatile u8 *)(NILE4_BASE+offset);
-    nile4_sync();
-    return val;
-}
-
-
-    /*
-     *	Physical Device Address Registers
-     */
-
-extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
-			   int on_memory_bus, int visible);
-
-
-    /*
-     *	PCI Master Registers
-     */
-
-#define NILE4_PCICMD_IACK	0	/* PCI Interrupt Acknowledge */
-#define NILE4_PCICMD_IO		1	/* PCI I/O Space */
-#define NILE4_PCICMD_MEM	3	/* PCI Memory Space */
-#define NILE4_PCICMD_CFG	5	/* PCI Configuration Space */
-
-
-    /*
-     *	PCI Address Spaces
-     *
-     *	Note that these are multiplexed using PCIINIT[01]!
-     */
-
-#define NILE4_PCI_IO_BASE	0xa6000000
-#define NILE4_PCI_MEM_BASE	0xa8000000
-#define NILE4_PCI_CFG_BASE	NILE4_PCI_MEM_BASE
-#define NILE4_PCI_IACK_BASE	NILE4_PCI_IO_BASE
-
-
-extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
-
-
-    /*
-     *	Interrupt Programming
-     */
-
-#define NUM_I8259_INTERRUPTS	16
-#define NUM_NILE4_INTERRUPTS	16
-
-#define IRQ_I8259_CASCADE	NILE4_INT_INTE
-#define is_i8259_irq(irq)	((irq) < NUM_I8259_INTERRUPTS)
-#define nile4_to_irq(n)		((n)+NUM_I8259_INTERRUPTS)
-#define irq_to_nile4(n)		((n)-NUM_I8259_INTERRUPTS)
-
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void);	/* Debug */
-
-#endif
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
deleted file mode 100644
index 11b89e94b835..000000000000
--- a/arch/mips/lasat/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-config PICVUE
-	tristate "PICVUE LCD display driver"
-	depends on LASAT
-
-config PICVUE_PROC
-	tristate "PICVUE LCD display driver /proc interface"
-	depends on PICVUE && PROC_FS
-
-config DS1603
-	bool "DS1603 RTC driver"
-	depends on LASAT
-
-config LASAT_SYSCTL
-	bool "LASAT sysctl interface"
-	depends on LASAT
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
deleted file mode 100644
index 1789b227ef20..000000000000
--- a/arch/mips/lasat/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the LASAT specific kernel interface routines under Linux.
-#
-
-obj-y				+= reset.o setup.o prom.o lasat_board.o \
-				   at93c.o interrupt.o serial.o
-
-obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
-obj-$(CONFIG_DS1603)		+= ds1603.o
-obj-$(CONFIG_PICVUE)		+= picvue.o
-obj-$(CONFIG_PICVUE_PROC)	+= picvue_proc.o
-
-clean:
-	make -C image clean
diff --git a/arch/mips/lasat/Platform b/arch/mips/lasat/Platform
deleted file mode 100644
index 760252828bf1..000000000000
--- a/arch/mips/lasat/Platform
+++ /dev/null
@@ -1,7 +0,0 @@ 
-#
-# LASAT platforms
-#
-platform-$(CONFIG_LASAT)	+= lasat/
-cflags-$(CONFIG_LASAT)		+=					\
-		-I$(srctree)/arch/mips/include/asm/mach-lasat
-load-$(CONFIG_LASAT)		+= 0xffffffff80000000
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
deleted file mode 100644
index f895fe94b937..000000000000
--- a/arch/mips/lasat/at93c.c
+++ /dev/null
@@ -1,148 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/lasat/lasat.h>
-
-#include "at93c.h"
-
-#define AT93C_ADDR_SHIFT	7
-#define AT93C_ADDR_MAX		((1 << AT93C_ADDR_SHIFT) - 1)
-#define AT93C_RCMD		(0x6 << AT93C_ADDR_SHIFT)
-#define AT93C_WCMD		(0x5 << AT93C_ADDR_SHIFT)
-#define AT93C_WENCMD		0x260
-#define AT93C_WDSCMD		0x200
-
-struct at93c_defs *at93c;
-
-static void at93c_reg_write(u32 val)
-{
-	*at93c->reg = val;
-}
-
-static u32 at93c_reg_read(void)
-{
-	u32 tmp = *at93c->reg;
-	return tmp;
-}
-
-static u32 at93c_datareg_read(void)
-{
-	u32 tmp = *at93c->rdata_reg;
-	return tmp;
-}
-
-static void at93c_cycle_clk(u32 data)
-{
-	at93c_reg_write(data | at93c->clk);
-	lasat_ndelay(250);
-	at93c_reg_write(data & ~at93c->clk);
-	lasat_ndelay(250);
-}
-
-static void at93c_write_databit(u8 bit)
-{
-	u32 data = at93c_reg_read();
-	if (bit)
-		data |= 1 << at93c->wdata_shift;
-	else
-		data &= ~(1 << at93c->wdata_shift);
-
-	at93c_reg_write(data);
-	lasat_ndelay(100);
-	at93c_cycle_clk(data);
-}
-
-static unsigned int at93c_read_databit(void)
-{
-	u32 data;
-
-	at93c_cycle_clk(at93c_reg_read());
-	data = (at93c_datareg_read() >> at93c->rdata_shift) & 1;
-	return data;
-}
-
-static u8 at93c_read_byte(void)
-{
-	int i;
-	u8 data = 0;
-
-	for (i = 0; i <= 7; i++) {
-		data <<= 1;
-		data |= at93c_read_databit();
-	}
-	return data;
-}
-
-static void at93c_write_bits(u32 data, int size)
-{
-	int i;
-	int shift = size - 1;
-	u32 mask = (1 << shift);
-
-	for (i = 0; i < size; i++) {
-		at93c_write_databit((data & mask) >> shift);
-		data <<= 1;
-	}
-}
-
-static void at93c_init_op(void)
-{
-	at93c_reg_write((at93c_reg_read() | at93c->cs) &
-			~at93c->clk & ~(1 << at93c->rdata_shift));
-	lasat_ndelay(50);
-}
-
-static void at93c_end_op(void)
-{
-	at93c_reg_write(at93c_reg_read() & ~at93c->cs);
-	lasat_ndelay(250);
-}
-
-static void at93c_wait(void)
-{
-	at93c_init_op();
-	while (!at93c_read_databit())
-		;
-	at93c_end_op();
-};
-
-static void at93c_disable_wp(void)
-{
-	at93c_init_op();
-	at93c_write_bits(AT93C_WENCMD, 10);
-	at93c_end_op();
-}
-
-static void at93c_enable_wp(void)
-{
-	at93c_init_op();
-	at93c_write_bits(AT93C_WDSCMD, 10);
-	at93c_end_op();
-}
-
-u8 at93c_read(u8 addr)
-{
-	u8 byte;
-	at93c_init_op();
-	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10);
-	byte = at93c_read_byte();
-	at93c_end_op();
-	return byte;
-}
-
-void at93c_write(u8 addr, u8 data)
-{
-	at93c_disable_wp();
-	at93c_init_op();
-	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10);
-	at93c_write_bits(data, 8);
-	at93c_end_op();
-	at93c_wait();
-	at93c_enable_wp();
-}
diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h
deleted file mode 100644
index 7a99a02d81d0..000000000000
--- a/arch/mips/lasat/at93c.h
+++ /dev/null
@@ -1,19 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-
-extern struct at93c_defs {
-	volatile u32 *reg;
-	volatile u32 *rdata_reg;
-	int rdata_shift;
-	int wdata_shift;
-	u32 cs;
-	u32 clk;
-} *at93c;
-
-u8 at93c_read(u8 addr);
-void at93c_write(u8 addr, u8 data);
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
deleted file mode 100644
index e6ce39fefa78..000000000000
--- a/arch/mips/lasat/ds1603.c
+++ /dev/null
@@ -1,190 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <asm/lasat/lasat.h>
-#include <linux/delay.h>
-#include <asm/lasat/ds1603.h>
-#include <asm/time.h>
-
-#include "ds1603.h"
-
-#define READ_TIME_CMD 0x81
-#define SET_TIME_CMD 0x80
-#define TRIMMER_SET_CMD 0xC0
-#define TRIMMER_VALUE_MASK 0x38
-#define TRIMMER_SHIFT 3
-
-struct ds_defs *ds1603;
-
-/* HW specific register functions */
-static void rtc_reg_write(unsigned long val)
-{
-	*ds1603->reg = val;
-}
-
-static unsigned long rtc_reg_read(void)
-{
-	unsigned long tmp = *ds1603->reg;
-	return tmp;
-}
-
-static unsigned long rtc_datareg_read(void)
-{
-	unsigned long tmp = *ds1603->data_reg;
-	return tmp;
-}
-
-static void rtc_nrst_high(void)
-{
-	rtc_reg_write(rtc_reg_read() | ds1603->rst);
-}
-
-static void rtc_nrst_low(void)
-{
-	rtc_reg_write(rtc_reg_read() & ~ds1603->rst);
-}
-
-static void rtc_cycle_clock(unsigned long data)
-{
-	data |= ds1603->clk;
-	rtc_reg_write(data);
-	lasat_ndelay(250);
-	if (ds1603->data_reversed)
-		data &= ~ds1603->data;
-	else
-		data |= ds1603->data;
-	data &= ~ds1603->clk;
-	rtc_reg_write(data);
-	lasat_ndelay(250 + ds1603->huge_delay);
-}
-
-static void rtc_write_databit(unsigned int bit)
-{
-	unsigned long data = rtc_reg_read();
-	if (ds1603->data_reversed)
-		bit = !bit;
-	if (bit)
-		data |= ds1603->data;
-	else
-		data &= ~ds1603->data;
-
-	rtc_reg_write(data);
-	lasat_ndelay(50 + ds1603->huge_delay);
-	rtc_cycle_clock(data);
-}
-
-static unsigned int rtc_read_databit(void)
-{
-	unsigned int data;
-
-	data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
-		>> ds1603->data_read_shift;
-	rtc_cycle_clock(rtc_reg_read());
-	return data;
-}
-
-static void rtc_write_byte(unsigned int byte)
-{
-	int i;
-
-	for (i = 0; i <= 7; i++) {
-		rtc_write_databit(byte & 1L);
-		byte >>= 1;
-	}
-}
-
-static void rtc_write_word(unsigned long word)
-{
-	int i;
-
-	for (i = 0; i <= 31; i++) {
-		rtc_write_databit(word & 1L);
-		word >>= 1;
-	}
-}
-
-static unsigned long rtc_read_word(void)
-{
-	int i;
-	unsigned long word = 0;
-	unsigned long shift = 0;
-
-	for (i = 0; i <= 31; i++) {
-		word |= rtc_read_databit() << shift;
-		shift++;
-	}
-	return word;
-}
-
-static void rtc_init_op(void)
-{
-	rtc_nrst_high();
-
-	rtc_reg_write(rtc_reg_read() & ~ds1603->clk);
-
-	lasat_ndelay(50);
-}
-
-static void rtc_end_op(void)
-{
-	rtc_nrst_low();
-	lasat_ndelay(1000);
-}
-
-void read_persistent_clock64(struct timespec64 *ts)
-{
-	unsigned long word;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_init_op();
-	rtc_write_byte(READ_TIME_CMD);
-	word = rtc_read_word();
-	rtc_end_op();
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	ts->tv_sec = word;
-	ts->tv_nsec = 0;
-}
-
-int update_persistent_clock64(struct timespec64 now)
-{
-	time64_t time = now.tv_sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_init_op();
-	rtc_write_byte(SET_TIME_CMD);
-	/*
-	 * Due to the hardware limitation, we cast to 'unsigned long' type,
-	 * so it will overflow in year 2106 on 32-bit machine.
-	 */
-	rtc_write_word((unsigned long)time);
-	rtc_end_op();
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void ds1603_set_trimmer(unsigned int trimval)
-{
-	rtc_init_op();
-	rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK)
-			| (TRIMMER_SET_CMD));
-	rtc_end_op();
-}
-
-void ds1603_disable(void)
-{
-	ds1603_set_trimmer(TRIMMER_DISABLE_RTC);
-}
-
-void ds1603_enable(void)
-{
-	ds1603_set_trimmer(TRIMMER_DEFAULT);
-}
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
deleted file mode 100644
index 00987d3bdc21..000000000000
--- a/arch/mips/lasat/ds1603.h
+++ /dev/null
@@ -1,32 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#ifndef __DS1603_H
-#define __DS1603_H
-
-struct ds_defs {
-	volatile u32 *reg;
-	volatile u32 *data_reg;
-	u32 rst;
-	u32 clk;
-	u32 data;
-	u32 data_read_shift;
-	char data_reversed;
-	u32 huge_delay;
-};
-
-extern struct ds_defs *ds1603;
-
-void ds1603_set_trimmer(unsigned int);
-void ds1603_enable(void);
-void ds1603_disable(void);
-void ds1603_init(struct ds_defs *);
-
-#define TRIMMER_DEFAULT 3
-#define TRIMMER_DISABLE_RTC 0
-
-#endif
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
deleted file mode 100644
index 78ce4cff1012..000000000000
--- a/arch/mips/lasat/image/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0
-#
-# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER
-#
-# i-data Networks
-#
-# Author: Thomas Horsten <thh@i-data.com>
-#
-
-ifndef Version
- Version = "$(USER)-test"
-endif
-
-MKLASATIMG = mklasatimg
-MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = vmlinux
-
-LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
-
-HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \
-		-D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \
-		-D VERSION="\"$(Version)\"" \
-		-D TIMESTAMP=$(shell date +%s)
-
-$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
-	$(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
-
-OBJECTS = head.o kImage.o
-
-rom.sw: $(obj)/rom.sw
-rom.bin:	$(obj)/rom.bin
-
-$(obj)/rom.sw:	$(obj)/rom.bin
-	$(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH)
-
-$(obj)/rom.bin: $(obj)/rom
-	$(OBJCOPY) -O binary -S $^ $@
-
-# Rule to make the bootloader
-$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS))
-	$(LD) $(KBUILD_LDFLAGS) $(LDSCRIPT) -o $@ $^
-
-$(obj)/%.o: $(obj)/%.gz
-	$(LD) -r -o $@ -b binary $<
-
-$(obj)/%.gz: $(obj)/%.bin
-	gzip -cf -9 $< > $@
-
-$(obj)/kImage.bin: $(KERNEL_IMAGE)
-	$(OBJCOPY) -O binary -S $^ $@
-
-clean:
-	rm -f rom rom.bin rom.sw kImage.bin kImage.o
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
deleted file mode 100644
index 1a27312d4c2e..000000000000
--- a/arch/mips/lasat/image/head.S
+++ /dev/null
@@ -1,32 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/head.h>
-
-	.text
-	.section .text..start, "ax"
-	.set noreorder
-	.set mips3
-
-	/* Magic words identifying a software image */
-	.word	LASAT_K_MAGIC0_VAL
-	.word	LASAT_K_MAGIC1_VAL
-
-	/* Image header version */
-	.word	0x00000002
-
-	/* image start and size */
-	.word	_image_start
-	.word	_image_size
-
-	/* start of kernel and entrypoint in uncompressed image */
-	.word	_kernel_start
-	.word	_kernel_entry
-
-	/* Here we have room for future flags */
-
-	.org	0x40
-reldate:
-	.word	TIMESTAMP
-
-	.org	0x50
-release:
-	.string VERSION
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
deleted file mode 100644
index 0864c963e188..000000000000
--- a/arch/mips/lasat/image/romscript.normal
+++ /dev/null
@@ -1,23 +0,0 @@ 
-OUTPUT_ARCH(mips)
-
-SECTIONS
-{
-  .text :
-  {
-    *(.text..start)
-  }
-
-  /* Data in ROM */
-
-  .data ALIGN(0x10) :
-  {
-    *(.data)
-  }
-  _image_start = ADDR(.data);
-  _image_size = SIZEOF(.data);
-
-  .other :
-  {
-    *(.*)
-  }
-}
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
deleted file mode 100644
index 7965bbd0d319..000000000000
--- a/arch/mips/lasat/interrupt.c
+++ /dev/null
@@ -1,119 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * Routines for generic manipulation of the interrupts found on the
- * Lasat boards.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/lasatint.h>
-
-#include <irq.h>
-
-static volatile int *lasat_int_status;
-static volatile int *lasat_int_mask;
-static volatile int lasat_int_mask_shift;
-
-void disable_lasat_irq(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
-	*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
-}
-
-void enable_lasat_irq(struct irq_data *d)
-{
-	unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
-	*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
-}
-
-static struct irq_chip lasat_irq_type = {
-	.name = "Lasat",
-	.irq_mask = disable_lasat_irq,
-	.irq_unmask = enable_lasat_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static unsigned long (*get_int_status)(void);
-
-static unsigned long get_int_status_100(void)
-{
-	return *lasat_int_status & *lasat_int_mask;
-}
-
-static unsigned long get_int_status_200(void)
-{
-	unsigned long int_status;
-
-	int_status = *lasat_int_status;
-	int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff;
-	return int_status;
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long int_status;
-	unsigned int cause = read_c0_cause();
-	int irq;
-
-	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
-		do_IRQ(7);
-		return;
-	}
-
-	int_status = get_int_status();
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (int_status) {
-		irq = LASAT_IRQ_BASE + ls1bit32(int_status);
-
-		do_IRQ(irq);
-	}
-}
-
-void __init arch_init_irq(void)
-{
-	int irq = LASAT_CASCADE_IRQ;
-	int i;
-
-	if (IS_LASAT_200()) {
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
-		get_int_status = get_int_status_200;
-		*lasat_int_mask &= 0xffff;
-	} else {
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-	}
-
-	mips_cpu_irq_init();
-
-	for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
-		irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
-
-	if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", irq);
-}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
deleted file mode 100644
index 80e1ba541148..000000000000
--- a/arch/mips/lasat/lasat_board.c
+++ /dev/null
@@ -1,268 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <linux/crc32.h>
-#include <asm/lasat/lasat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/mutex.h>
-#include <asm/addrspace.h>
-#include "at93c.h"
-/* New model description table */
-#include "lasat_models.h"
-
-static DEFINE_MUTEX(lasat_eeprom_mutex);
-
-#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
-
-struct lasat_info lasat_board_info;
-
-int EEPROMRead(unsigned int pos, unsigned char *data, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		*data++ = at93c_read(pos++);
-
-	return 0;
-}
-
-int EEPROMWrite(unsigned int pos, unsigned char *data, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		at93c_write(pos++, *data++);
-
-	return 0;
-}
-
-static void init_flash_sizes(void)
-{
-	unsigned long *lb = lasat_board_info.li_flashpart_base;
-	unsigned long *ls = lasat_board_info.li_flashpart_size;
-	int i;
-
-	ls[LASAT_MTD_BOOTLOADER] = 0x40000;
-	ls[LASAT_MTD_SERVICE] = 0xC0000;
-	ls[LASAT_MTD_NORMAL] = 0x100000;
-
-	if (!IS_LASAT_200()) {
-		lasat_board_info.li_flash_base = 0x1e000000;
-
-		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
-
-		if (lasat_board_info.li_flash_size > 0x200000) {
-			ls[LASAT_MTD_CONFIG] = 0x100000;
-			ls[LASAT_MTD_FS] = 0x500000;
-		}
-	} else {
-		lasat_board_info.li_flash_base = 0x10000000;
-
-		if (lasat_board_info.li_flash_size < 0x1000000) {
-			lb[LASAT_MTD_BOOTLOADER] = 0x10000000;
-			ls[LASAT_MTD_CONFIG] = 0x100000;
-			if (lasat_board_info.li_flash_size >= 0x400000)
-				ls[LASAT_MTD_FS] =
-				     lasat_board_info.li_flash_size - 0x300000;
-		}
-	}
-
-	for (i = 1; i < LASAT_MTD_LAST; i++)
-		lb[i] = lb[i-1] + ls[i-1];
-}
-
-int lasat_init_board_info(void)
-{
-	int c;
-	unsigned long crc;
-	unsigned long cfg0, cfg1;
-	const struct product_info   *ppi;
-	int i_n_base_models = N_BASE_MODELS;
-	const char * const * i_txt_base_models = txt_base_models;
-	int i_n_prids = N_PRIDS;
-
-	memset(&lasat_board_info, 0, sizeof(lasat_board_info));
-
-	/* First read the EEPROM info */
-	EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
-		   sizeof(struct lasat_eeprom_struct));
-
-	/* Check the CRC */
-	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
-		    sizeof(struct lasat_eeprom_struct) - 4);
-
-	if (crc != lasat_board_info.li_eeprom_info.crc32) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
-		       "not match calculated, attempting to soldier on...\n");
-	}
-
-	if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
-		       "%d, wanted version %d, attempting to soldier on...\n",
-		       (unsigned int)lasat_board_info.li_eeprom_info.version,
-		       LASAT_EEPROM_VERSION);
-	}
-
-	cfg0 = lasat_board_info.li_eeprom_info.cfg[0];
-	cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
-
-	if (LASAT_W0_DSCTYPE(cfg0) != 1) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\n"
-		       "Invalid configuration read from EEPROM, attempting to "
-		       "soldier on...");
-	}
-	/* We have a valid configuration */
-
-	switch (LASAT_W0_SDRAMBANKSZ(cfg0)) {
-	case 0:
-		lasat_board_info.li_memsize = 0x0800000;
-		break;
-	case 1:
-		lasat_board_info.li_memsize = 0x1000000;
-		break;
-	case 2:
-		lasat_board_info.li_memsize = 0x2000000;
-		break;
-	case 3:
-		lasat_board_info.li_memsize = 0x4000000;
-		break;
-	case 4:
-		lasat_board_info.li_memsize = 0x8000000;
-		break;
-	default:
-		lasat_board_info.li_memsize = 0;
-	}
-
-	switch (LASAT_W0_SDRAMBANKS(cfg0)) {
-	case 0:
-		break;
-	case 1:
-		lasat_board_info.li_memsize *= 2;
-		break;
-	default:
-		break;
-	}
-
-	switch (LASAT_W0_BUSSPEED(cfg0)) {
-	case 0x0:
-		lasat_board_info.li_bus_hz = 60000000;
-		break;
-	case 0x1:
-		lasat_board_info.li_bus_hz = 66000000;
-		break;
-	case 0x2:
-		lasat_board_info.li_bus_hz = 66666667;
-		break;
-	case 0x3:
-		lasat_board_info.li_bus_hz = 80000000;
-		break;
-	case 0x4:
-		lasat_board_info.li_bus_hz = 83333333;
-		break;
-	case 0x5:
-		lasat_board_info.li_bus_hz = 100000000;
-		break;
-	}
-
-	switch (LASAT_W0_CPUCLK(cfg0)) {
-	case 0x0:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz;
-		break;
-	case 0x1:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			(lasat_board_info.li_bus_hz >> 1);
-		break;
-	case 0x2:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz;
-		break;
-	case 0x3:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz +
-			(lasat_board_info.li_bus_hz >> 1);
-		break;
-	case 0x4:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz;
-		break;
-	}
-
-	/* Flash size */
-	switch (LASAT_W1_FLASHSIZE(cfg1)) {
-	case 0:
-		lasat_board_info.li_flash_size = 0x200000;
-		break;
-	case 1:
-		lasat_board_info.li_flash_size = 0x400000;
-		break;
-	case 2:
-		lasat_board_info.li_flash_size = 0x800000;
-		break;
-	case 3:
-		lasat_board_info.li_flash_size = 0x1000000;
-		break;
-	case 4:
-		lasat_board_info.li_flash_size = 0x2000000;
-		break;
-	}
-
-	init_flash_sizes();
-
-	lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0);
-	lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid;
-	if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0)
-		lasat_board_info.li_prid = lasat_board_info.li_bmid;
-
-	/* Base model stuff */
-	if (lasat_board_info.li_bmid > i_n_base_models)
-		lasat_board_info.li_bmid = i_n_base_models;
-	strcpy(lasat_board_info.li_bmstr,
-	       i_txt_base_models[lasat_board_info.li_bmid]);
-
-	/* Product ID dependent values */
-	c = lasat_board_info.li_prid;
-	if (c >= i_n_prids) {
-		strcpy(lasat_board_info.li_namestr, "Unknown Model");
-		strcpy(lasat_board_info.li_typestr, "Unknown Type");
-	} else {
-		ppi = &vendor_info_table[0].vi_product_info[c];
-		strcpy(lasat_board_info.li_namestr, ppi->pi_name);
-		if (ppi->pi_type)
-			strcpy(lasat_board_info.li_typestr, ppi->pi_type);
-		else
-			sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
-	}
-
-	return 0;
-}
-
-void lasat_write_eeprom_info(void)
-{
-	unsigned long crc;
-
-	mutex_lock(&lasat_eeprom_mutex);
-
-	/* Generate the CRC */
-	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
-		    sizeof(struct lasat_eeprom_struct) - 4);
-	lasat_board_info.li_eeprom_info.crc32 = crc;
-
-	/* Write the EEPROM info */
-	EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
-		    sizeof(struct lasat_eeprom_struct));
-
-	mutex_unlock(&lasat_eeprom_mutex);
-}
diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h
deleted file mode 100644
index 474e57342484..000000000000
--- a/arch/mips/lasat/lasat_models.h
+++ /dev/null
@@ -1,68 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Model description tables
- */
-#include <linux/kernel.h>
-
-struct product_info {
-	const char     *pi_name;
-	const char     *pi_type;
-};
-
-struct vendor_info {
-	const char     *vi_name;
-	const struct product_info *vi_product_info;
-};
-
-/*
- * Base models
- */
-static const char * const txt_base_models[] = {
-	"MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000",
-	"SP 1000", "Unknown"
-};
-#define N_BASE_MODELS (ARRAY_SIZE(txt_base_models) - 1)
-
-/*
- * Eicon Networks
- */
-static const char txt_en_mq[] = "Masquerade";
-static const char txt_en_sp[] = "Safepipe";
-
-static const struct product_info product_info_eicon[] = {
-	{ txt_en_mq, "II"   }, /*  0 */
-	{ txt_en_mq, "Pro"  }, /*  1 */
-	{ txt_en_sp, "25"   }, /*  2 */
-	{ txt_en_sp, "50"   }, /*  3 */
-	{ txt_en_sp, "100"  }, /*  4 */
-	{ txt_en_sp, "5000" }, /*  5 */
-	{ txt_en_sp, "7000" }, /*  6 */
-	{ txt_en_sp, "30"   }, /*  7 */
-	{ txt_en_sp, "5100" }, /*  8 */
-	{ txt_en_sp, "7100" }, /*  9 */
-	{ txt_en_sp, "1110" }, /* 10 */
-	{ txt_en_sp, "3020" }, /* 11 */
-	{ txt_en_sp, "3030" }, /* 12 */
-	{ txt_en_sp, "5020" }, /* 13 */
-	{ txt_en_sp, "5030" }, /* 14 */
-	{ txt_en_sp, "1120" }, /* 15 */
-	{ txt_en_sp, "1130" }, /* 16 */
-	{ txt_en_sp, "6010" }, /* 17 */
-	{ txt_en_sp, "6110" }, /* 18 */
-	{ txt_en_sp, "6210" }, /* 19 */
-	{ txt_en_sp, "1020" }, /* 20 */
-	{ txt_en_sp, "1040" }, /* 21 */
-	{ txt_en_sp, "1050" }, /* 22 */
-	{ txt_en_sp, "1060" }, /* 23 */
-};
-
-#define N_PRIDS ARRAY_SIZE(product_info_eicon)
-
-/*
- * The vendor table
- */
-static struct vendor_info const vendor_info_table[] = {
-	{ "Eicon Networks",	product_info_eicon   },
-};
-
-#define N_VENDORS ARRAY_SIZE(vendor_info_table)
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
deleted file mode 100644
index 08298ccf5ccf..000000000000
--- a/arch/mips/lasat/picvue.c
+++ /dev/null
@@ -1,242 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include "picvue.h"
-
-#define PVC_BUSY		0x80
-#define PVC_NLINES		2
-#define PVC_DISPMEM		80
-#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
-
-struct pvc_defs *picvue;
-
-static void pvc_reg_write(u32 val)
-{
-	*picvue->reg = val;
-}
-
-static u32 pvc_reg_read(void)
-{
-	u32 tmp = *picvue->reg;
-	return tmp;
-}
-
-static void pvc_write_byte(u32 data, u8 byte)
-{
-	data |= picvue->e;
-	pvc_reg_write(data);
-	data &= ~picvue->data_mask;
-	data |= byte << picvue->data_shift;
-	pvc_reg_write(data);
-	ndelay(220);
-	pvc_reg_write(data & ~picvue->e);
-	ndelay(220);
-}
-
-static u8 pvc_read_byte(u32 data)
-{
-	u8 byte;
-
-	data |= picvue->e;
-	pvc_reg_write(data);
-	ndelay(220);
-	byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift;
-	data &= ~picvue->e;
-	pvc_reg_write(data);
-	ndelay(220);
-	return byte;
-}
-
-static u8 pvc_read_data(void)
-{
-	u32 data = pvc_reg_read();
-	u8 byte;
-	data |= picvue->rw;
-	data &= ~picvue->rs;
-	pvc_reg_write(data);
-	ndelay(40);
-	byte = pvc_read_byte(data);
-	data |= picvue->rs;
-	pvc_reg_write(data);
-	return byte;
-}
-
-#define TIMEOUT 1000
-static int pvc_wait(void)
-{
-	int i = TIMEOUT;
-	int err = 0;
-
-	while ((pvc_read_data() & PVC_BUSY) && i)
-		i--;
-	if (i == 0)
-		err = -ETIME;
-
-	return err;
-}
-
-#define MODE_INST 0
-#define MODE_DATA 1
-static void pvc_write(u8 byte, int mode)
-{
-	u32 data = pvc_reg_read();
-	data &= ~picvue->rw;
-	if (mode == MODE_DATA)
-		data |= picvue->rs;
-	else
-		data &= ~picvue->rs;
-	pvc_reg_write(data);
-	ndelay(40);
-	pvc_write_byte(data, byte);
-	if (mode == MODE_DATA)
-		data &= ~picvue->rs;
-	else
-		data |= picvue->rs;
-	pvc_reg_write(data);
-	pvc_wait();
-}
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line)
-{
-	int i = 0;
-
-	if (line > 0 && (PVC_NLINES > 1))
-		addr += 0x40 * line;
-	pvc_write(0x80 | addr, MODE_INST);
-
-	while (*str != 0 && i < PVC_LINELEN) {
-		pvc_write(*str++, MODE_DATA);
-		i++;
-	}
-}
-
-void pvc_write_string_centered(const unsigned char *str, int line)
-{
-	int len = strlen(str);
-	u8 addr;
-
-	if (len > PVC_VISIBLE_CHARS)
-		addr = 0;
-	else
-		addr = (PVC_VISIBLE_CHARS - strlen(str))/2;
-
-	pvc_write_string(str, addr, line);
-}
-
-void pvc_dump_string(const unsigned char *str)
-{
-	int len = strlen(str);
-
-	pvc_write_string(str, 0, 0);
-	if (len > PVC_VISIBLE_CHARS)
-		pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1);
-}
-
-#define BM_SIZE			8
-#define MAX_PROGRAMMABLE_CHARS	8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE])
-{
-	int i;
-	int addr;
-
-	if (charnum > MAX_PROGRAMMABLE_CHARS)
-		return -ENOENT;
-
-	addr = charnum * 8;
-	pvc_write(0x40 | addr, MODE_INST);
-
-	for (i = 0; i < BM_SIZE; i++)
-		pvc_write(bitmap[i], MODE_DATA);
-	return 0;
-}
-
-#define FUNC_SET_CMD	0x20
-#define	 EIGHT_BYTE	(1 << 4)
-#define	 FOUR_BYTE	0
-#define	 TWO_LINES	(1 << 3)
-#define	 ONE_LINE	0
-#define	 LARGE_FONT	(1 << 2)
-#define	 SMALL_FONT	0
-
-static void pvc_funcset(u8 cmd)
-{
-	pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)),
-		  MODE_INST);
-}
-
-#define ENTRYMODE_CMD		0x4
-#define	 AUTO_INC		(1 << 1)
-#define	 AUTO_DEC		0
-#define	 CURSOR_FOLLOWS_DISP	(1 << 0)
-
-static void pvc_entrymode(u8 cmd)
-{
-	pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)),
-		  MODE_INST);
-}
-
-#define DISP_CNT_CMD	0x08
-#define	 DISP_OFF	0
-#define	 DISP_ON	(1 << 2)
-#define	 CUR_ON		(1 << 1)
-#define	 CUR_BLINK	(1 << 0)
-void pvc_dispcnt(u8 cmd)
-{
-	pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
-}
-
-#define MOVE_CMD	0x10
-#define	 DISPLAY	(1 << 3)
-#define	 CURSOR		0
-#define	 RIGHT		(1 << 2)
-#define	 LEFT		0
-void pvc_move(u8 cmd)
-{
-	pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
-}
-
-#define CLEAR_CMD	0x1
-void pvc_clear(void)
-{
-	pvc_write(CLEAR_CMD, MODE_INST);
-}
-
-#define HOME_CMD	0x2
-void pvc_home(void)
-{
-	pvc_write(HOME_CMD, MODE_INST);
-}
-
-int pvc_init(void)
-{
-	u8 cmd = EIGHT_BYTE;
-
-	if (PVC_NLINES == 2)
-		cmd |= (SMALL_FONT|TWO_LINES);
-	else
-		cmd |= (LARGE_FONT|ONE_LINE);
-	pvc_funcset(cmd);
-	pvc_dispcnt(DISP_ON);
-	pvc_entrymode(AUTO_INC);
-
-	pvc_clear();
-	pvc_write_string_centered("Display", 0);
-	pvc_write_string_centered("Initialized", 1);
-
-	return 0;
-}
-
-module_init(pvc_init);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
deleted file mode 100644
index 161d3bf50811..000000000000
--- a/arch/mips/lasat/picvue.h
+++ /dev/null
@@ -1,45 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-struct pvc_defs {
-	volatile u32 *reg;
-	u32 data_shift;
-	u32 data_mask;
-	u32 e;
-	u32 rw;
-	u32 rs;
-};
-
-extern struct pvc_defs *picvue;
-
-#define PVC_NLINES		2
-#define PVC_DISPMEM		80
-#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
-#define PVC_VISIBLE_CHARS	16
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line);
-void pvc_write_string_centered(const unsigned char *str, int line);
-void pvc_dump_string(const unsigned char *str);
-
-#define BM_SIZE			8
-#define MAX_PROGRAMMABLE_CHARS	8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
-
-void pvc_dispcnt(u8 cmd);
-#define	 DISP_OFF	0
-#define	 DISP_ON	(1 << 2)
-#define	 CUR_ON		(1 << 1)
-#define	 CUR_BLINK	(1 << 0)
-
-void pvc_move(u8 cmd);
-#define	 DISPLAY	(1 << 3)
-#define	 CURSOR		0
-#define	 RIGHT		(1 << 2)
-#define	 LEFT		0
-
-void pvc_clear(void);
-void pvc_home(void);
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
deleted file mode 100644
index 61c033494af5..000000000000
--- a/arch/mips/lasat/picvue_proc.c
+++ /dev/null
@@ -1,208 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/bug.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-#include <linux/timer.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-
-#include "picvue.h"
-
-static DEFINE_MUTEX(pvc_mutex);
-static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
-static int pvc_linedata[PVC_NLINES];
-static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
-#define DISPLAY_DIR_NAME "display"
-static int scroll_dir, scroll_interval;
-
-static struct timer_list timer;
-
-static void pvc_display(unsigned long data)
-{
-	int i;
-
-	pvc_clear();
-	for (i = 0; i < PVC_NLINES; i++)
-		pvc_write_string(pvc_lines[i], 0, i);
-}
-
-static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
-
-static int pvc_line_proc_show(struct seq_file *m, void *v)
-{
-	int lineno = *(int *)m->private;
-
-	if (lineno < 0 || lineno >= PVC_NLINES) {
-		printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
-		return 0;
-	}
-
-	mutex_lock(&pvc_mutex);
-	seq_printf(m, "%s\n", pvc_lines[lineno]);
-	mutex_unlock(&pvc_mutex);
-
-	return 0;
-}
-
-static int pvc_line_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pvc_line_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
-				   size_t count, loff_t *pos)
-{
-	int lineno = *(int *)PDE_DATA(file_inode(file));
-	char kbuf[PVC_LINELEN];
-	size_t len;
-
-	BUG_ON(lineno < 0 || lineno >= PVC_NLINES);
-
-	len = min(count, sizeof(kbuf) - 1);
-	if (copy_from_user(kbuf, buf, len))
-		return -EFAULT;
-	kbuf[len] = '\0';
-
-	if (len > 0 && kbuf[len - 1] == '\n')
-		len--;
-
-	mutex_lock(&pvc_mutex);
-	strncpy(pvc_lines[lineno], kbuf, len);
-	pvc_lines[lineno][len] = '\0';
-	mutex_unlock(&pvc_mutex);
-
-	tasklet_schedule(&pvc_display_tasklet);
-
-	return count;
-}
-
-static const struct proc_ops pvc_line_proc_ops = {
-	.proc_open	= pvc_line_proc_open,
-	.proc_read	= seq_read,
-	.proc_lseek	= seq_lseek,
-	.proc_release	= single_release,
-	.proc_write	= pvc_line_proc_write,
-};
-
-static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
-				     size_t count, loff_t *pos)
-{
-	char kbuf[42];
-	size_t len;
-	int cmd;
-
-	len = min(count, sizeof(kbuf) - 1);
-	if (copy_from_user(kbuf, buf, len))
-		return -EFAULT;
-	kbuf[len] = '\0';
-
-	cmd = simple_strtol(kbuf, NULL, 10);
-
-	mutex_lock(&pvc_mutex);
-	if (scroll_interval != 0)
-		del_timer(&timer);
-
-	if (cmd == 0) {
-		scroll_dir = 0;
-		scroll_interval = 0;
-	} else {
-		if (cmd < 0) {
-			scroll_dir = -1;
-			scroll_interval = -cmd;
-		} else {
-			scroll_dir = 1;
-			scroll_interval = cmd;
-		}
-		add_timer(&timer);
-	}
-	mutex_unlock(&pvc_mutex);
-
-	return count;
-}
-
-static int pvc_scroll_proc_show(struct seq_file *m, void *v)
-{
-	mutex_lock(&pvc_mutex);
-	seq_printf(m, "%d\n", scroll_dir * scroll_interval);
-	mutex_unlock(&pvc_mutex);
-
-	return 0;
-}
-
-static int pvc_scroll_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pvc_scroll_proc_show, NULL);
-}
-
-static const struct proc_ops pvc_scroll_proc_ops = {
-	.proc_open	= pvc_scroll_proc_open,
-	.proc_read	= seq_read,
-	.proc_lseek	= seq_lseek,
-	.proc_release	= single_release,
-	.proc_write	= pvc_scroll_proc_write,
-};
-
-void pvc_proc_timerfunc(struct timer_list *unused)
-{
-	if (scroll_dir < 0)
-		pvc_move(DISPLAY|RIGHT);
-	else if (scroll_dir > 0)
-		pvc_move(DISPLAY|LEFT);
-
-	timer.expires = jiffies + scroll_interval;
-	add_timer(&timer);
-}
-
-static void pvc_proc_cleanup(void)
-{
-	remove_proc_subtree(DISPLAY_DIR_NAME, NULL);
-	del_timer_sync(&timer);
-}
-
-static int __init pvc_proc_init(void)
-{
-	struct proc_dir_entry *dir, *proc_entry;
-	int i;
-
-	dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
-	if (dir == NULL)
-		goto error;
-
-	for (i = 0; i < PVC_NLINES; i++) {
-		strcpy(pvc_lines[i], "");
-		pvc_linedata[i] = i;
-	}
-	for (i = 0; i < PVC_NLINES; i++) {
-		proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
-					&pvc_line_proc_ops, &pvc_linedata[i]);
-		if (proc_entry == NULL)
-			goto error;
-	}
-	proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops);
-	if (proc_entry == NULL)
-		goto error;
-
-	timer_setup(&timer, pvc_proc_timerfunc, 0);
-
-	return 0;
-error:
-	pvc_proc_cleanup();
-	return -ENOMEM;
-}
-
-module_init(pvc_proc_init);
-module_exit(pvc_proc_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
deleted file mode 100644
index 5ce1407de2d5..000000000000
--- a/arch/mips/lasat/prom.c
+++ /dev/null
@@ -1,126 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PROM interface routines.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <asm/cpu.h>
-#include <asm/setup.h>
-
-#include "at93c.h"
-#include <asm/lasat/eeprom.h>
-#include "prom.h"
-
-#define RESET_VECTOR	0xbfc00000
-#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n))
-#define PROM_DISPLAY_ADDR	PROM_JUMP_TABLE_ENTRY(0)
-#define PROM_PUTC_ADDR		PROM_JUMP_TABLE_ENTRY(1)
-#define PROM_MONITOR_ADDR	PROM_JUMP_TABLE_ENTRY(2)
-
-static void null_prom_display(const char *string, int pos, int clear)
-{
-}
-
-static void null_prom_monitor(void)
-{
-}
-
-static void null_prom_putc(char c)
-{
-}
-
-/* these are functions provided by the bootloader */
-static void (*__prom_putc)(char c) = null_prom_putc;
-
-void prom_putchar(char c)
-{
-	__prom_putc(c);
-}
-
-void (*prom_display)(const char *string, int pos, int clear) =
-		null_prom_display;
-void (*prom_monitor)(void) = null_prom_monitor;
-
-unsigned int lasat_ndelay_divider;
-
-static void setup_prom_vectors(void)
-{
-	u32 version = *(u32 *)(RESET_VECTOR + 0x90);
-
-	if (version >= 307) {
-		prom_display = (void *)PROM_DISPLAY_ADDR;
-		__prom_putc = (void *)PROM_PUTC_ADDR;
-		prom_monitor = (void *)PROM_MONITOR_ADDR;
-	}
-	printk(KERN_DEBUG "prom vectors set up\n");
-}
-
-static struct at93c_defs at93c_defs[N_MACHTYPES] = {
-	{
-		.reg		= (void *)AT93C_REG_100,
-		.rdata_reg	= (void *)AT93C_RDATA_REG_100,
-		.rdata_shift	= AT93C_RDATA_SHIFT_100,
-		.wdata_shift	= AT93C_WDATA_SHIFT_100,
-		.cs		= AT93C_CS_M_100,
-		.clk		= AT93C_CLK_M_100
-	}, {
-		.reg		= (void *)AT93C_REG_200,
-		.rdata_reg	= (void *)AT93C_RDATA_REG_200,
-		.rdata_shift	= AT93C_RDATA_SHIFT_200,
-		.wdata_shift	= AT93C_WDATA_SHIFT_200,
-		.cs		= AT93C_CS_M_200,
-		.clk		= AT93C_CLK_M_200
-	},
-};
-
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **argv = (char **) fw_arg1;
-
-	setup_prom_vectors();
-
-	if (IS_LASAT_200()) {
-		printk(KERN_INFO "LASAT 200 board\n");
-		lasat_ndelay_divider = LASAT_200_DIVIDER;
-		at93c = &at93c_defs[1];
-	} else {
-		printk(KERN_INFO "LASAT 100 board\n");
-		lasat_ndelay_divider = LASAT_100_DIVIDER;
-		at93c = &at93c_defs[0];
-	}
-
-	lasat_init_board_info();		/* Read info from EEPROM */
-
-	/* Get the command line */
-	if (argc > 0) {
-		strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1);
-		arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0';
-	}
-
-	/* Set the I/O base address */
-	set_io_port_base(KSEG1);
-
-	/* Set memory regions */
-	ioport_resource.start = 0;
-	ioport_resource.end = 0xffffffff;	/* Wrong, fixme.  */
-
-	add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-	return lasat_board_info.li_bmstr;
-}
diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h
deleted file mode 100644
index 3d1df853e9d3..000000000000
--- a/arch/mips/lasat/prom.h
+++ /dev/null
@@ -1,8 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PROM_H
-#define __PROM_H
-
-extern void (*prom_display)(const char *string, int pos, int clear);
-extern void (*prom_monitor)(void);
-
-#endif /* __PROM_H */
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
deleted file mode 100644
index 7c516ed9af15..000000000000
--- a/arch/mips/lasat/reset.c
+++ /dev/null
@@ -1,48 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Reset the LASAT board.
- */
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/lasat/lasat.h>
-
-#include "picvue.h"
-#include "prom.h"
-
-static void lasat_machine_restart(char *command);
-static void lasat_machine_halt(void);
-
-/* Used to set machine to boot in service mode via /proc interface */
-int lasat_boot_to_service;
-
-static void lasat_machine_restart(char *command)
-{
-	local_irq_disable();
-
-	if (lasat_boot_to_service) {
-		*(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
-		*(volatile unsigned int *)0xa00000fc = 0xfedeabba;
-	}
-	*lasat_misc->reset_reg = 0xbedead;
-	for (;;) ;
-}
-
-static void lasat_machine_halt(void)
-{
-	local_irq_disable();
-
-	prom_monitor();
-	for (;;) ;
-}
-
-void lasat_reboot_setup(void)
-{
-	_machine_restart = lasat_machine_restart;
-	_machine_halt = lasat_machine_halt;
-	pm_power_off = lasat_machine_halt;
-}
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
deleted file mode 100644
index 16b242713420..000000000000
--- a/arch/mips/lasat/serial.c
+++ /dev/null
@@ -1,80 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Registration of Lasat UART platform device.
- *
- *  Copyright (C) 2007	Brian Murphy <brian@murphy.dk>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-static struct resource lasat_serial_res[2] __initdata;
-
-static struct plat_serial8250_port lasat_serial8250_port[] = {
-	{
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF |
-				  UPF_SKIP_TEST,
-	},
-	{},
-};
-
-static __init int lasat_uart_add(void)
-{
-	struct platform_device *pdev;
-	int retval;
-
-	pdev = platform_device_alloc("serial8250", -1);
-	if (!pdev)
-		return -ENOMEM;
-
-	if (!IS_LASAT_200()) {
-		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
-		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
-		lasat_serial_res[0].flags = IORESOURCE_MEM;
-		lasat_serial_res[1].start = LASATINT_UART_100;
-		lasat_serial_res[1].end = LASATINT_UART_100;
-		lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
-		lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_100;
-		lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_100 * 16;
-		lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_100;
-		lasat_serial8250_port[0].irq = LASATINT_UART_100;
-	} else {
-		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200);
-		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_200 * 8 - 1;
-		lasat_serial_res[0].flags = IORESOURCE_MEM;
-		lasat_serial_res[1].start = LASATINT_UART_200;
-		lasat_serial_res[1].end = LASATINT_UART_200;
-		lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
-		lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_200;
-		lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_200 * 16;
-		lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_200;
-		lasat_serial8250_port[0].irq = LASATINT_UART_200;
-	}
-
-	pdev->id = PLAT8250_DEV_PLATFORM;
-	pdev->dev.platform_data = lasat_serial8250_port;
-
-	retval = platform_device_add_resources(pdev, lasat_serial_res, ARRAY_SIZE(lasat_serial_res));
-	if (retval)
-		goto err_free_device;
-
-	retval = platform_device_add(pdev);
-	if (retval)
-		goto err_free_device;
-
-	return 0;
-
-err_free_device:
-	platform_device_put(pdev);
-
-	return retval;
-}
-device_initcall(lasat_uart_add);
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
deleted file mode 100644
index 0743243fd86d..000000000000
--- a/arch/mips/lasat/setup.c
+++ /dev/null
@@ -1,141 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Brian Murphy <brian@murphy.dk>
- *
- * Lasat specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-#ifdef CONFIG_PICVUE
-#include <linux/notifier.h>
-#endif
-
-#include "ds1603.h"
-#include <asm/lasat/ds1603.h>
-#include <asm/lasat/picvue.h>
-#include <asm/lasat/eeprom.h>
-
-#include "prom.h"
-
-int lasat_command_line;
-void lasatint_init(void);
-
-extern void lasat_reboot_setup(void);
-extern void pcisetup(void);
-extern void edhac_init(void *, void *, void *);
-extern void addrflt_init(void);
-
-struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
-	{
-		.reset_reg	= (void *)KSEG1ADDR(0x1c840000),
-		.flash_wp_reg	= (void *)KSEG1ADDR(0x1c800000), 2
-	}, {
-		.reset_reg	= (void *)KSEG1ADDR(0x11080000),
-		.flash_wp_reg	= (void *)KSEG1ADDR(0x11000000), 6
-	}
-};
-
-struct lasat_misc *lasat_misc;
-
-#ifdef CONFIG_DS1603
-static struct ds_defs ds_defs[N_MACHTYPES] = {
-	{ (void *)DS1603_REG_100, (void *)DS1603_REG_100,
-		DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
-		DS1603_DATA_SHIFT_100, 0, 0 },
-	{ (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
-		DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
-		DS1603_DATA_READ_SHIFT_200, 1, 2000 }
-};
-#endif
-
-#ifdef CONFIG_PICVUE
-#include "picvue.h"
-static struct pvc_defs pvc_defs[N_MACHTYPES] = {
-	{ (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
-		PVC_E_100, PVC_RW_100, PVC_RS_100 },
-	{ (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
-		PVC_E_200, PVC_RW_200, PVC_RS_200 }
-};
-#endif
-
-static int lasat_panic_display(struct notifier_block *this,
-			     unsigned long event, void *ptr)
-{
-#ifdef CONFIG_PICVUE
-	unsigned char *string = ptr;
-	if (string == NULL)
-		string = "Kernel Panic";
-	pvc_dump_string(string);
-#endif
-	return NOTIFY_DONE;
-}
-
-static int lasat_panic_prom_monitor(struct notifier_block *this,
-			     unsigned long event, void *ptr)
-{
-	prom_monitor();
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block lasat_panic_block[] =
-{
-	{
-		.notifier_call	= lasat_panic_display,
-		.priority	= INT_MAX
-	}, {
-		.notifier_call	= lasat_panic_prom_monitor,
-		.priority	= INT_MIN
-	}
-};
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
-
-	change_c0_status(ST0_IM, IE_IRQ0);
-}
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	int lasat_type = IS_LASAT_200() ? 1 : 0;
-
-	lasat_misc  = &lasat_misc_info[lasat_type];
-#ifdef CONFIG_PICVUE
-	picvue = &pvc_defs[lasat_type];
-#endif
-
-	/* Set up panic notifier */
-	for (i = 0; i < ARRAY_SIZE(lasat_panic_block); i++)
-		atomic_notifier_chain_register(&panic_notifier_list,
-				&lasat_panic_block[i]);
-
-	lasat_reboot_setup();
-
-#ifdef CONFIG_DS1603
-	ds1603 = &ds_defs[lasat_type];
-#endif
-
-#ifdef DYNAMIC_SERIAL_INIT
-	serial_init();
-#endif
-
-	pr_info("Lasat specific initialization complete\n");
-}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
deleted file mode 100644
index e666fe26c50d..000000000000
--- a/arch/mips/lasat/sysctl.c
+++ /dev/null
@@ -1,268 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <asm/lasat/lasat.h>
-
-#include <linux/sysctl.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/net.h>
-#include <linux/inet.h>
-#include <linux/uaccess.h>
-
-#include <asm/time.h>
-
-#ifdef CONFIG_DS1603
-#include "ds1603.h"
-#endif
-
-
-/* And the same for proc */
-int proc_dolasatstring(struct ctl_table *table, int write,
-		       void *buffer, size_t *lenp, loff_t *ppos)
-{
-	int r;
-
-	r = proc_dostring(table, write, buffer, lenp, ppos);
-	if ((!write) || r)
-		return r;
-
-	lasat_write_eeprom_info();
-
-	return 0;
-}
-
-#ifdef CONFIG_DS1603
-static int rtctmp;
-
-/* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(struct ctl_table *table, int write,
-		       void *buffer, size_t *lenp, loff_t *ppos)
-{
-	struct timespec64 ts;
-	int r;
-
-	if (!write) {
-		read_persistent_clock64(&ts);
-		rtctmp = ts.tv_sec;
-		/* check for time < 0 and set to 0 */
-		if (rtctmp < 0)
-			rtctmp = 0;
-	}
-	r = proc_dointvec(table, write, buffer, lenp, ppos);
-	if (r)
-		return r;
-
-	if (write) {
-		/*
-		 * Due to the RTC hardware limitation, we can not actually
-		 * use the full 64-bit range here.
-		 */
-		ts.tv_sec = rtctmp;
-		ts.tv_nsec = 0;
-
-		update_persistent_clock64(ts);
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_INET
-int proc_lasat_ip(struct ctl_table *table, int write,
-		       void *buffer, size_t *lenp, loff_t *ppos)
-{
-	unsigned int ip;
-	char *p, c;
-	int len;
-	char ipbuf[32];
-
-	if (!table->data || !table->maxlen || !*lenp ||
-	    (*ppos && !write)) {
-		*lenp = 0;
-		return 0;
-	}
-
-	if (write) {
-		len = 0;
-		p = buffer;
-		while (len < *lenp) {
-			if (get_user(c, p++))
-				return -EFAULT;
-			if (c == 0 || c == '\n')
-				break;
-			len++;
-		}
-		if (len >= sizeof(ipbuf)-1)
-			len = sizeof(ipbuf) - 1;
-		if (copy_from_user(ipbuf, buffer, len))
-			return -EFAULT;
-		ipbuf[len] = 0;
-		*ppos += *lenp;
-		/* Now see if we can convert it to a valid IP */
-		ip = in_aton(ipbuf);
-		*(unsigned int *)(table->data) = ip;
-		lasat_write_eeprom_info();
-	} else {
-		ip = *(unsigned int *)(table->data);
-		sprintf(ipbuf, "%d.%d.%d.%d",
-			(ip)	   & 0xff,
-			(ip >>	8) & 0xff,
-			(ip >> 16) & 0xff,
-			(ip >> 24) & 0xff);
-		len = strlen(ipbuf);
-		if (len > *lenp)
-			len = *lenp;
-		if (len)
-			if (copy_to_user(buffer, ipbuf, len))
-				return -EFAULT;
-		if (len < *lenp) {
-			if (put_user('\n', ((char *) buffer) + len))
-				return -EFAULT;
-			len++;
-		}
-		*lenp = len;
-		*ppos += len;
-	}
-
-	return 0;
-}
-#endif
-
-int proc_lasat_prid(struct ctl_table *table, int write,
-		       void *buffer, size_t *lenp, loff_t *ppos)
-{
-	int r;
-
-	r = proc_dointvec(table, write, buffer, lenp, ppos);
-	if (r < 0)
-		return r;
-	if (write) {
-		lasat_board_info.li_eeprom_info.prid =
-			lasat_board_info.li_prid;
-		lasat_write_eeprom_info();
-		lasat_init_board_info();
-	}
-	return 0;
-}
-
-extern int lasat_boot_to_service;
-
-static struct ctl_table lasat_table[] = {
-	{
-		.procname	= "cpu-hz",
-		.data		= &lasat_board_info.li_cpu_hz,
-		.maxlen		= sizeof(int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "bus-hz",
-		.data		= &lasat_board_info.li_bus_hz,
-		.maxlen		= sizeof(int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "bmid",
-		.data		= &lasat_board_info.li_bmid,
-		.maxlen		= sizeof(int),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "prid",
-		.data		= &lasat_board_info.li_prid,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_lasat_prid,
-	},
-#ifdef CONFIG_INET
-	{
-		.procname	= "ipaddr",
-		.data		= &lasat_board_info.li_eeprom_info.ipaddr,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_lasat_ip,
-	},
-	{
-		.procname	= "netmask",
-		.data		= &lasat_board_info.li_eeprom_info.netmask,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_lasat_ip,
-	},
-#endif
-	{
-		.procname	= "passwd_hash",
-		.data		= &lasat_board_info.li_eeprom_info.passwd_hash,
-		.maxlen		=
-			sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
-		.mode		= 0600,
-		.proc_handler	= proc_dolasatstring,
-	},
-	{
-		.procname	= "boot-service",
-		.data		= &lasat_boot_to_service,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_DS1603
-	{
-		.procname	= "rtc",
-		.data		= &rtctmp,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dolasatrtc,
-	},
-#endif
-	{
-		.procname	= "namestr",
-		.data		= &lasat_board_info.li_namestr,
-		.maxlen		= sizeof(lasat_board_info.li_namestr),
-		.mode		= 0444,
-		.proc_handler	= proc_dostring,
-	},
-	{
-		.procname	= "typestr",
-		.data		= &lasat_board_info.li_typestr,
-		.maxlen		= sizeof(lasat_board_info.li_typestr),
-		.mode		= 0444,
-		.proc_handler	= proc_dostring,
-	},
-	{}
-};
-
-static struct ctl_table lasat_root_table[] = {
-	{
-		.procname	= "lasat",
-		.mode		=  0555,
-		.child		= lasat_table
-	},
-	{}
-};
-
-static int __init lasat_register_sysctl(void)
-{
-	struct ctl_table_header *lasat_table_header;
-
-	lasat_table_header =
-		register_sysctl_table(lasat_root_table);
-	if (!lasat_table_header) {
-		printk(KERN_ERR "Unable to register LASAT sysctl\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-arch_initcall(lasat_register_sysctl);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 342ce10ef593..c6142b289086 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -13,7 +13,6 @@  obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
 obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
 obj-$(CONFIG_PCI_GT64XXX_PCI0)	+= ops-gt64xxx_pci0.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
-obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
 obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
@@ -31,7 +30,6 @@  obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_ATH79)		+= fixup-ath79.o
-obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
 obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
deleted file mode 100644
index b00658d19116..000000000000
--- a/arch/mips/pci/ops-nile4.c
+++ /dev/null
@@ -1,136 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/bootinfo.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/nile4.h>
-
-#define PCI_ACCESS_READ	 0
-#define PCI_ACCESS_WRITE 1
-
-#define LO(reg) (reg / 4)
-#define HI(reg) (reg / 4 + 1)
-
-volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-
-static int nile4_pcibios_config_access(unsigned char access_type,
-	struct pci_bus *bus, unsigned int devfn, int where, u32 *val)
-{
-	unsigned char busnum = bus->number;
-	u32 adr, mask, err;
-
-	if ((busnum == 0) && (PCI_SLOT(devfn) > 8))
-		/* The addressing scheme chosen leaves room for just
-		 * 8 devices on the first busnum (besides the PCI
-		 * controller itself) */
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) {
-		/* Access controller registers directly */
-		if (access_type == PCI_ACCESS_WRITE) {
-			vrc_pciregs[(0x200 + where) >> 2] = *val;
-		} else {
-			*val = vrc_pciregs[(0x200 + where) >> 2];
-		}
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	/* Temporarily map PCI Window 1 to config space */
-	mask = vrc_pciregs[LO(NILE4_PCIINIT1)];
-	vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0);
-
-	/* Clear PCI Error register. This also clears the Error Type
-	 * bits in the Control register */
-	vrc_pciregs[LO(NILE4_PCIERR)] = 0;
-	vrc_pciregs[HI(NILE4_PCIERR)] = 0;
-
-	/* Setup address */
-	if (busnum == 0)
-		adr =
-		    KSEG1ADDR(PCI_WINDOW1) +
-		    ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8)
-		     | (where & ~3));
-	else
-		adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) |
-		      (where & ~3);
-
-	if (access_type == PCI_ACCESS_WRITE)
-		*(u32 *) adr = *val;
-	else
-		*val = *(u32 *) adr;
-
-	/* Check for master or target abort */
-	err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7;
-
-	/* Restore PCI Window 1 */
-	vrc_pciregs[LO(NILE4_PCIINIT1)] = mask;
-
-	if (err)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 *val)
-{
-	u32 data = 0;
-	int err;
-
-	if ((size == 2) && (where & 1))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	else if ((size == 4) && (where & 3))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
-					  &data);
-	if (err)
-		return err;
-
-	if (size == 1)
-		*val = (data >> ((where & 3) << 3)) & 0xff;
-	else if (size == 2)
-		*val = (data >> ((where & 3) << 3)) & 0xffff;
-	else
-		*val = data;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 val)
-{
-	u32 data = 0;
-	int err;
-
-	if ((size == 2) && (where & 1))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	else if ((size == 4) && (where & 3))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
-					  &data);
-	if (err)
-		return err;
-
-	if (size == 1)
-		data = (data & ~(0xff << ((where & 3) << 3))) |
-		    (val << ((where & 3) << 3));
-	else if (size == 2)
-		data = (data & ~(0xffff << ((where & 3) << 3))) |
-		    (val << ((where & 3) << 3));
-	else
-		data = val;
-
-	if (nile4_pcibios_config_access
-	    (PCI_ACCESS_WRITE, bus, devfn, where, &data))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nile4_pci_ops = {
-	.read = nile4_pcibios_read,
-	.write = nile4_pcibios_write,
-};
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
deleted file mode 100644
index 47f4ee6bbb3b..000000000000
--- a/arch/mips/pci/pci-lasat.c
+++ /dev/null
@@ -1,88 +0,0 @@ 
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-
-#include <asm/lasat/lasat.h>
-
-#include <irq.h>
-
-extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64xxx_pci0_ops;
-static struct resource lasat_pci_mem_resource = {
-	.name	= "LASAT PCI MEM",
-	.start	= 0x18000000,
-	.end	= 0x19ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource lasat_pci_io_resource = {
-	.name	= "LASAT PCI IO",
-	.start	= 0x1a000000,
-	.end	= 0x1bffffff,
-	.flags	= IORESOURCE_IO,
-};
-
-static struct pci_controller lasat_pci_controller = {
-	.mem_resource	= &lasat_pci_mem_resource,
-	.io_resource	= &lasat_pci_io_resource,
-};
-
-static int __init lasat_pci_setup(void)
-{
-	printk(KERN_DEBUG "PCI: starting\n");
-
-	if (IS_LASAT_200())
-		lasat_pci_controller.pci_ops = &nile4_pci_ops;
-	else
-		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-
-	register_pci_controller(&lasat_pci_controller);
-
-	return 0;
-}
-
-arch_initcall(lasat_pci_setup);
-
-#define LASAT_IRQ_ETH1	 (LASAT_IRQ_BASE + 0)
-#define LASAT_IRQ_ETH0	 (LASAT_IRQ_BASE + 1)
-#define LASAT_IRQ_HDC	 (LASAT_IRQ_BASE + 2)
-#define LASAT_IRQ_COMP	 (LASAT_IRQ_BASE + 3)
-#define LASAT_IRQ_HDLC	 (LASAT_IRQ_BASE + 4)
-#define LASAT_IRQ_PCIA	 (LASAT_IRQ_BASE + 5)
-#define LASAT_IRQ_PCIB	 (LASAT_IRQ_BASE + 6)
-#define LASAT_IRQ_PCIC	 (LASAT_IRQ_BASE + 7)
-#define LASAT_IRQ_PCID	 (LASAT_IRQ_BASE + 8)
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch (slot) {
-	case 1:
-	case 2:
-	case 3:
-		return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
-	case 4:
-		return LASAT_IRQ_ETH1;	 /* Ethernet 1 (LAN 2) */
-	case 5:
-		return LASAT_IRQ_ETH0;	 /* Ethernet 0 (LAN 1) */
-	case 6:
-		return LASAT_IRQ_HDC;	 /* IDE controller */
-	default:
-		return 0xff;		/* Illegal */
-	}
-
-	return -1;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}