From: Jeffrey Hugo <jhugo@codeaurora.org>
To: arnd@arndb.de, gregkh@linuxfoundation.org
Cc: manivannan.sadhasivam@linaro.org, bjorn.andersson@linaro.org,
wufan@codeaurora.org, pratanan@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Jeffrey Hugo <jhugo@codeaurora.org>
Subject: [RFC v2 PATCH 1/8] qaic: Add skeleton driver
Date: Tue, 19 May 2020 08:13:58 -0600 [thread overview]
Message-ID: <1589897645-17088-2-git-send-email-jhugo@codeaurora.org> (raw)
In-Reply-To: <1589897645-17088-1-git-send-email-jhugo@codeaurora.org>
Add the Qualcomm Cloud AI 100 skeleton driver that does nothing but
registers a pci driver, probes on the proper device, and supports removal
of the module.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/qaic/Kconfig | 20 ++++++++++++++
drivers/misc/qaic/Makefile | 9 +++++++
drivers/misc/qaic/qaic_drv.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 93 insertions(+)
create mode 100644 drivers/misc/qaic/Kconfig
create mode 100644 drivers/misc/qaic/Makefile
create mode 100644 drivers/misc/qaic/qaic_drv.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 99e1514..ef91d062 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -481,4 +481,5 @@ source "drivers/misc/ocxl/Kconfig"
source "drivers/misc/cardreader/Kconfig"
source "drivers/misc/habanalabs/Kconfig"
source "drivers/misc/uacce/Kconfig"
+source "drivers/misc/qaic/Kconfig"
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 9abf292..64f0770 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_HABANA_AI) += habanalabs/
obj-$(CONFIG_UACCE) += uacce/
obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
+obj-$(CONFIG_QAIC) += qaic/
diff --git a/drivers/misc/qaic/Kconfig b/drivers/misc/qaic/Kconfig
new file mode 100644
index 0000000..502d176
--- /dev/null
+++ b/drivers/misc/qaic/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Qualcomm Cloud AI 100 accelerators driver
+#
+
+config QAIC
+ tristate "Qualcomm Cloud AI 100 accelerators"
+ depends on PCI && HAS_IOMEM
+ depends on MHI_BUS
+ help
+ Enables driver for Qualcomm's Cloud AI 100 accelerator PCIe cards
+ that are designed to accelerate Deep Learning inference workloads.
+
+ The driver manages the PCIe devices and provides an IOCTL interface
+ for users to submit workloads to the devices.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qaic.
diff --git a/drivers/misc/qaic/Makefile b/drivers/misc/qaic/Makefile
new file mode 100644
index 0000000..9db6417
--- /dev/null
+++ b/drivers/misc/qaic/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for Qualcomm Cloud AI 100 accelerators driver
+#
+
+obj-$(CONFIG_QAIC) := qaic.o
+
+qaic-y := \
+ qaic_drv.o
diff --git a/drivers/misc/qaic/qaic_drv.c b/drivers/misc/qaic/qaic_drv.c
new file mode 100644
index 0000000..942dbf6
--- /dev/null
+++ b/drivers/misc/qaic/qaic_drv.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#define PCI_DEV_AIC100 0xa100
+
+static int qaic_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ pci_dbg(pdev, "%s\n", __func__);
+ pci_dbg(pdev, "%s: successful init\n", __func__);
+ return 0;
+}
+
+static void qaic_pci_remove(struct pci_dev *pdev)
+{
+ pci_dbg(pdev, "%s\n", __func__);
+}
+
+static const struct pci_device_id ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, PCI_DEV_AIC100), },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ids);
+
+static struct pci_driver qaic_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ids,
+ .probe = qaic_pci_probe,
+ .remove = qaic_pci_remove,
+};
+
+static int __init qaic_init(void)
+{
+ int ret;
+
+ pr_debug("qaic: init\n");
+
+ ret = pci_register_driver(&qaic_pci_driver);
+
+ pr_debug("qaic: init success\n");
+
+ return ret;
+}
+
+static void __exit qaic_exit(void)
+{
+ pr_debug("qaic: exit\n");
+ pci_unregister_driver(&qaic_pci_driver);
+}
+
+module_init(qaic_init);
+module_exit(qaic_exit);
+
+MODULE_AUTHOR("Qualcomm Cloud AI 100 Accelerator Kernel Driver Team");
+MODULE_DESCRIPTION("Qualcomm Cloud AI 100 Accelerators Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.0.0"); /* MAJOR.MINOR.PATCH */
--
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-05-19 14:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-19 14:13 [RFC v2 PATCH 0/8] Qualcomm Cloud AI 100 driver Jeffrey Hugo
2020-05-19 14:13 ` Jeffrey Hugo [this message]
2020-05-19 14:13 ` [RFC v2 PATCH 2/8] qaic: Add and init a basic mhi controller Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 3/8] qaic: Create misc dev Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 4/8] qaic: Implement control path Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 5/8] qaic: Implement data path Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 6/8] qaic: Implement PCI link status error handlers Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 7/8] qaic: Implement MHI error status handler Jeffrey Hugo
2020-05-19 14:14 ` [RFC v2 PATCH 8/8] MAINTAINERS: Add entry for QAIC driver Jeffrey Hugo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589897645-17088-2-git-send-email-jhugo@codeaurora.org \
--to=jhugo@codeaurora.org \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=pratanan@codeaurora.org \
--cc=wufan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).