linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Singh Tomar <amittomer25@gmail.com>
To: andre.przywara@arm.com, vkoul@kernel.org, afaerber@suse.de,
	manivannan.sadhasivam@linaro.org
Cc: dan.j.williams@intel.com, cristian.ciocaltea@gmail.com,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org
Subject: [PATCH v2 02/10] dmaengine: Actions: Add support for S700 DMA engine
Date: Tue, 19 May 2020 23:49:20 +0530	[thread overview]
Message-ID: <1589912368-480-3-git-send-email-amittomer25@gmail.com> (raw)
In-Reply-To: <1589912368-480-1-git-send-email-amittomer25@gmail.com>

DMA controller present on S700 SoC is compatible with the one on S900
(as most of registers are same), but it has different DMA descriptor
structure where registers "fcnt" and "ctrlb" uses different encoding.

For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.

This commit adds support for DMA controller present on S700.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v1:
	* Moved llc_hw_flen() to patch 1/9
	* provided comments about dma descriptor difference 
	  between S700 and S900.
Changes since RFC:
	* Added accessor function to get the frame lenght.
        * Removed the SoC specific check in IRQ routine.
---
 drivers/dma/owl-dma.c | 46 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
index dd85c205454e..17d2fc2d568b 100644
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -137,6 +137,11 @@ enum owl_dmadesc_offsets {
 	OWL_DMADESC_SIZE
 };
 
+enum owl_dma_id {
+	S900_DMA,
+	S700_DMA,
+};
+
 /**
  * struct owl_dma_lli - Link list for dma transfer
  * @hw: hardware link list
@@ -203,6 +208,7 @@ struct owl_dma_vchan {
  * @pchans: array of data for the physical channels
  * @nr_vchans: the number of physical channels
  * @vchans: array of data for the physical channels
+ * @devid: device id based on OWL SoC
  */
 struct owl_dma {
 	struct dma_device	dma;
@@ -217,6 +223,7 @@ struct owl_dma {
 
 	unsigned int		nr_vchans;
 	struct owl_dma_vchan	*vchans;
+	enum owl_dma_id		devid;
 };
 
 static void pchan_update(struct owl_dma_pchan *pchan, u32 reg,
@@ -306,6 +313,11 @@ static inline u32 llc_hw_ctrlb(u32 int_ctl)
 {
 	u32 ctl;
 
+	/*
+	 * Irrespective of the SoC, ctrlb value starts filling from
+	 * bit 18.
+	 */
+
 	ctl = BIT_FIELD(int_ctl, 7, 0, 18);
 
 	return ctl;
@@ -362,6 +374,7 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 				  struct dma_slave_config *sconfig,
 				  bool is_cyclic)
 {
+	struct owl_dma *od = to_owl_dma(vchan->vc.chan.device);
 	u32 mode, ctrlb;
 
 	mode = OWL_DMA_MODE_PW(0);
@@ -417,8 +430,18 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 	lli->hw[OWL_DMADESC_DADDR] = dst;
 	lli->hw[OWL_DMADESC_SRC_STRIDE] = 0;
 	lli->hw[OWL_DMADESC_DST_STRIDE] = 0;
-	lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
-	lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+
+	/*
+	 * S700 put flen and fcnt at offset 0x0c and 0x1c respectively,
+	 * whereas S900 put flen and fcnt at offset 0x0c.
+	 */
+	if (od->devid == S700_DMA) {
+		lli->hw[OWL_DMADESC_FLEN] = len;
+		lli->hw[OWL_DMADESC_CTRLB] = FCNT_VAL | ctrlb;
+	} else {
+		lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
+		lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+	}
 
 	return 0;
 }
@@ -580,7 +603,7 @@ static irqreturn_t owl_dma_interrupt(int irq, void *dev_id)
 
 		global_irq_pending = dma_readl(od, OWL_DMA_IRQ_PD0);
 
-		if (chan_irq_pending && !(global_irq_pending & BIT(i)))	{
+		if (chan_irq_pending && !(global_irq_pending & BIT(i))) {
 			dev_dbg(od->dma.dev,
 				"global and channel IRQ pending match err\n");
 
@@ -1038,11 +1061,20 @@ static struct dma_chan *owl_dma_of_xlate(struct of_phandle_args *dma_spec,
 	return chan;
 }
 
+static const struct of_device_id owl_dma_match[] = {
+	{ .compatible = "actions,s900-dma", .data = (void *)S900_DMA,},
+	{ .compatible = "actions,s700-dma", .data = (void *)S700_DMA,},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, owl_dma_match);
+
 static int owl_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct owl_dma *od;
 	int ret, i, nr_channels, nr_requests;
+	const struct of_device_id *of_id =
+				of_match_device(owl_dma_match, &pdev->dev);
 
 	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
 	if (!od)
@@ -1067,6 +1099,8 @@ static int owl_dma_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "dma-channels %d, dma-requests %d\n",
 		 nr_channels, nr_requests);
 
+	od->devid = (enum owl_dma_id)of_id->data;
+
 	od->nr_pchans = nr_channels;
 	od->nr_vchans = nr_requests;
 
@@ -1199,12 +1233,6 @@ static int owl_dma_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id owl_dma_match[] = {
-	{ .compatible = "actions,s900-dma", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, owl_dma_match);
-
 static struct platform_driver owl_dma_driver = {
 	.probe	= owl_dma_probe,
 	.remove	= owl_dma_remove,
-- 
2.7.4


  parent reply	other threads:[~2020-05-19 18:21 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19 18:19 [PATCH v2 00/10] Add MMC and DMA support for Actions S700 Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 01/10] dmaengine: Actions: get rid of bit fields from dma descriptor Amit Singh Tomar
2020-05-19 18:19 ` Amit Singh Tomar [this message]
2020-05-19 18:19 ` [PATCH v2 03/10] clk: actions: Add MMC clock-register reset bits Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 04/10] arm64: dts: actions: *do not merge* disable sps node from S700 Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 05/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml Amit Singh Tomar
2020-05-28 21:17   ` Rob Herring
2020-05-19 18:19 ` [PATCH v2 06/10] arm64: dts: actions: Add DMA Controller for S700 Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 07/10] dt-bindings: reset: s700: Add binding constants for mmc Amit Singh Tomar
2020-05-19 18:33   ` Rob Herring
2020-05-19 19:03     ` Amit Tomer
2020-05-19 19:00   ` Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc Amit Singh Tomar
2020-05-28 21:17   ` [PATCH v2 08/10] dt-bindings: mmc: owl: add compatible string actions, s700-mmc Rob Herring
2020-05-19 18:19 ` [PATCH v2 09/10] arm64: dts: actions: Add MMC controller support for S700 Amit Singh Tomar
2020-05-19 18:19 ` [PATCH v2 10/10] arm64: dts: actions: Add uSD support for Cubieboard7 Amit Singh Tomar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589912368-480-3-git-send-email-amittomer25@gmail.com \
    --to=amittomer25@gmail.com \
    --cc=afaerber@suse.de \
    --cc=andre.przywara@arm.com \
    --cc=cristian.ciocaltea@gmail.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).