From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH v2 1/2] staging: rtl8188eu: clean up some declarations
Date: Sun, 24 May 2020 12:15:13 +0200 [thread overview]
Message-ID: <20200524101514.20557-1-straube.linux@gmail.com> (raw)
Clean up some array declarations in phy_iq_calibrate() to reduce
indentation and clear line over 80 characters checkpatch warnings.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
v1 -> v2
Added patch that makes arrays static const.
drivers/staging/rtl8188eu/hal/phy.c | 33 +++++++++++++++--------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index 5eca3625d5a8..a0522d6764d6 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -953,25 +953,26 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
u32 i;
u8 path_a_ok, path_b_ok;
u32 adda_reg[IQK_ADDA_REG_NUM] = {
- rFPGA0_XCD_SwitchControl, rBlue_Tooth,
- rRx_Wait_CCA, rTx_CCK_RFON,
- rTx_CCK_BBON, rTx_OFDM_RFON,
- rTx_OFDM_BBON, rTx_To_Rx,
- rTx_To_Tx, rRx_CCK,
- rRx_OFDM, rRx_Wait_RIFS,
- rRx_TO_Rx, rStandby,
- rSleep, rPMPD_ANAEN};
-
+ rFPGA0_XCD_SwitchControl, rBlue_Tooth,
+ rRx_Wait_CCA, rTx_CCK_RFON,
+ rTx_CCK_BBON, rTx_OFDM_RFON,
+ rTx_OFDM_BBON, rTx_To_Rx,
+ rTx_To_Tx, rRx_CCK,
+ rRx_OFDM, rRx_Wait_RIFS,
+ rRx_TO_Rx, rStandby,
+ rSleep, rPMPD_ANAEN
+ };
u32 iqk_mac_reg[IQK_MAC_REG_NUM] = {
- REG_TXPAUSE, REG_BCN_CTRL,
- REG_BCN_CTRL_1, REG_GPIO_MUXCFG};
-
+ REG_TXPAUSE, REG_BCN_CTRL,
+ REG_BCN_CTRL_1, REG_GPIO_MUXCFG
+ };
/* since 92C & 92D have the different define in IQK_BB_REG */
u32 iqk_bb_reg_92c[IQK_BB_REG_NUM] = {
- rOFDM0_TRxPathEnable, rOFDM0_TRMuxPar,
- rFPGA0_XCD_RFInterfaceSW, rConfig_AntA, rConfig_AntB,
- rFPGA0_XAB_RFInterfaceSW, rFPGA0_XA_RFInterfaceOE,
- rFPGA0_XB_RFInterfaceOE, rFPGA0_RFMOD};
+ rOFDM0_TRxPathEnable, rOFDM0_TRMuxPar,
+ rFPGA0_XCD_RFInterfaceSW, rConfig_AntA, rConfig_AntB,
+ rFPGA0_XAB_RFInterfaceSW, rFPGA0_XA_RFInterfaceOE,
+ rFPGA0_XB_RFInterfaceOE, rFPGA0_RFMOD
+ };
u32 retry_count = 9;
--
2.26.2
next reply other threads:[~2020-05-24 10:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-24 10:15 Michael Straube [this message]
2020-05-24 10:15 ` [PATCH v2 2/2] staging: rtl8188eu: make some arrays static const Michael Straube
2020-05-24 11:17 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200524101514.20557-1-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).