linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lianbo Jiang <lijiang@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: kexec@lists.infradead.org, ebiederm@xmission.com, jbohac@suse.cz,
	jmorris@namei.org, mjg59@google.com, dyoung@redhat.com,
	bhe@redhat.com
Subject: [PATCH] kexec: Do not verify the signature without the lockdown or mandatory signature
Date: Mon, 25 May 2020 13:23:51 +0800	[thread overview]
Message-ID: <20200525052351.24134-1-lijiang@redhat.com> (raw)

Signature verification is an important security feature, to protect
system from being attacked with a kernel of unknown origin. Kexec
rebooting is a way to replace the running kernel, hence need be
secured carefully.

In the current code of handling signature verification of kexec kernel,
the logic is very twisted. It mixes signature verification, IMA signature
appraising and kexec lockdown.

If there is no KEXEC_SIG_FORCE, kexec kernel image doesn't have one of
signature, the supported crypto, and key, we don't think this is wrong,
Unless kexec lockdown is executed. IMA is considered as another kind of
signature appraising method.

If kexec kernel image has signature/crypto/key, it has to go through the
signature verification and pass. Otherwise it's seen as verification
failure, and won't be loaded.

Seems kexec kernel image with an unqualified signature is even worse than
those w/o signature at all, this sounds very unreasonable. E.g. If people
get a unsigned kernel to load, or a kernel signed with expired key, which
one is more dangerous?

So, here, let's simplify the logic to improve code readability. If the
KEXEC_SIG_FORCE enabled or kexec lockdown enabled, signature verification
is mandated. Otherwise, we lift the bar for any kernel image.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
---
 kernel/kexec_file.c | 37 ++++++-------------------------------
 1 file changed, 6 insertions(+), 31 deletions(-)

diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index faa74d5f6941..e4bdf0c42f35 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -181,52 +181,27 @@ void kimage_file_post_load_cleanup(struct kimage *image)
 static int
 kimage_validate_signature(struct kimage *image)
 {
-	const char *reason;
 	int ret;
 
 	ret = arch_kexec_kernel_verify_sig(image, image->kernel_buf,
 					   image->kernel_buf_len);
-	switch (ret) {
-	case 0:
-		break;
+	if (ret) {
+		pr_debug("kernel signature verification failed (%d).\n", ret);
 
-		/* Certain verification errors are non-fatal if we're not
-		 * checking errors, provided we aren't mandating that there
-		 * must be a valid signature.
-		 */
-	case -ENODATA:
-		reason = "kexec of unsigned image";
-		goto decide;
-	case -ENOPKG:
-		reason = "kexec of image with unsupported crypto";
-		goto decide;
-	case -ENOKEY:
-		reason = "kexec of image with unavailable key";
-	decide:
-		if (IS_ENABLED(CONFIG_KEXEC_SIG_FORCE)) {
-			pr_notice("%s rejected\n", reason);
+		if (IS_ENABLED(CONFIG_KEXEC_SIG_FORCE))
 			return ret;
-		}
 
-		/* If IMA is guaranteed to appraise a signature on the kexec
+		/*
+		 * If IMA is guaranteed to appraise a signature on the kexec
 		 * image, permit it even if the kernel is otherwise locked
 		 * down.
 		 */
 		if (!ima_appraise_signature(READING_KEXEC_IMAGE) &&
 		    security_locked_down(LOCKDOWN_KEXEC))
 			return -EPERM;
-
-		return 0;
-
-		/* All other errors are fatal, including nomem, unparseable
-		 * signatures and signature check failures - even if signatures
-		 * aren't required.
-		 */
-	default:
-		pr_notice("kernel signature verification failed (%d).\n", ret);
 	}
 
-	return ret;
+	return 0;
 }
 #endif
 
-- 
2.17.1


             reply	other threads:[~2020-05-25  5:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-25  5:23 Lianbo Jiang [this message]
2020-05-26  5:04 ` [PATCH] kexec: Do not verify the signature without the lockdown or mandatory signature Dave Young
2020-05-26 13:59 ` Jiri Bohac
2020-05-27  3:15   ` lijiang
2020-05-27  4:08     ` lijiang
2020-05-27 10:16       ` Jiri Bohac

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200525052351.24134-1-lijiang@redhat.com \
    --to=lijiang@redhat.com \
    --cc=bhe@redhat.com \
    --cc=dyoung@redhat.com \
    --cc=ebiederm@xmission.com \
    --cc=jbohac@suse.cz \
    --cc=jmorris@namei.org \
    --cc=kexec@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg59@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).