From: amirmizi6@gmail.com
To: Eyal.Cohen@nuvoton.com, jarkko.sakkinen@linux.intel.com,
oshrialkoby85@gmail.com, alexander.steffen@infineon.com,
robh+dt@kernel.org,
"benoit.houyere@st.com--to=mark.rutland"@arm.com,
peterhuewe@gmx.de, christophe-h.richard@st.com, jgg@ziepe.ca,
arnd@arndb.de, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-integrity@vger.kernel.org, oshri.alkoby@nuvoton.com,
tmaimon77@gmail.com, gcwilson@us.ibm.com, kgoldman@us.ibm.com,
Dan.Morav@nuvoton.com, oren.tanami@nuvoton.com,
shmulik.hager@nuvoton.com, amir.mizinski@nuvoton.com,
Amir Mizinski <amirmizi6@gmail.com>,
Christophe Ricard <christophe-h.ricard@st.com>
Subject: [PATCH v9 3/8] tpm: tpm_tis: Add retry in case of protocol failure or data integrity (on I2C only) failure.
Date: Tue, 26 May 2020 17:16:53 +0300 [thread overview]
Message-ID: <20200526141658.157801-4-amirmizi6@gmail.com> (raw)
In-Reply-To: <20200526141658.157801-1-amirmizi6@gmail.com>
From: Amir Mizinski <amirmizi6@gmail.com>
The FIFO protocol described in the TCG PC Client Device Driver Design
Principles for TPM 2.0 advises retrying sending a command or receiving
a response using the FIFO protocol in case of any error in the protocol.
Add a retry mechanism on any protocol error. In addition, in case of a data
integrity issue in the I2C bus protocol, check after sending a command
completion or receiving a response from the TPM.
Co-developed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
drivers/char/tpm/tpm_tis_core.c | 107 ++++++++++++++++++++++++----------------
drivers/char/tpm/tpm_tis_core.h | 3 ++
2 files changed, 67 insertions(+), 43 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index c725b68..97eae72 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -312,7 +312,7 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int size = 0;
- int status;
+ int status, i;
u32 expected;
if (count < TPM_HEADER_SIZE) {
@@ -320,40 +320,53 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
goto out;
}
- size = recv_data(chip, buf, TPM_HEADER_SIZE);
- /* read first 10 bytes, including tag, paramsize, and result */
- if (size < TPM_HEADER_SIZE) {
- dev_err(&chip->dev, "Unable to read header\n");
- goto out;
- }
+ for (i = 0; i < TPM_RETRY; i++) {
+ size = recv_data(chip, buf, TPM_HEADER_SIZE);
+ /* read first 10 bytes, including tag, paramsize, and result */
+ if (size < TPM_HEADER_SIZE) {
+ dev_err(&chip->dev, "Unable to read header\n");
+ goto retry;
+ }
- expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count || expected < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
+ expected = be32_to_cpu(*(__be32 *) (buf + 2));
+ if (expected > count || expected < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto retry;
+ }
- size += recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE);
- if (size < expected) {
- dev_err(&chip->dev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
+ size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+ expected - TPM_HEADER_SIZE);
+ if (size < expected) {
+ dev_err(&chip->dev, "Unable to read remainder of result\n");
+ size = -ETIME;
+ goto retry;
+ }
- if (wait_for_tpm_stat_result(chip, TPM_STS_VALID,
- TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false) < 0) {
- size = -ETIME;
- goto out;
- }
- status = tpm_tis_status(chip);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(&chip->dev, "Error left over data\n");
- size = -EIO;
- goto out;
- }
+ if (wait_for_tpm_stat_result(chip, TPM_STS_VALID,
+ TPM_STS_VALID, chip->timeout_c,
+ &priv->int_queue, false) < 0) {
+ size = -ETIME;
+ goto retry;
+ }
+ status = tpm_tis_status(chip);
+ if (status & TPM_STS_DATA_AVAIL) { /* retry? */
+ dev_err(&chip->dev, "Error left over data\n");
+ size = -EIO;
+ goto retry;
+ }
+
+ if (priv->phy_ops->verify_data_integrity)
+ if (!priv->phy_ops->verify_data_integrity(priv, buf,
+ size))
+ size = -EIO;
+retry:
+ if (size <= 0)
+ tpm_tis_write8(priv, TPM_STS(priv->locality),
+ TPM_STS_RESPONSE_RETRY);
+ else
+ goto out;
+ }
out:
tpm_tis_ready(chip);
return size;
@@ -378,7 +391,7 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
chip->timeout_b,
&priv->int_queue, false) < 0) {
rc = -ETIME;
- goto out_err;
+ return rc;
}
}
@@ -387,13 +400,13 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
if (burstcnt < 0) {
dev_err(&chip->dev, "Unable to read burstcount\n");
rc = burstcnt;
- goto out_err;
+ return rc;
}
burstcnt = min_t(int, burstcnt, len - count);
rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality),
burstcnt, buf + count);
if (rc < 0)
- goto out_err;
+ return rc;
count += burstcnt;
}
@@ -401,14 +414,10 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
TPM_STS_VALID, chip->timeout_a,
&priv->int_queue, false) < 0) {
rc = -ETIME;
- goto out_err;
+ return rc;
}
return 0;
-
-out_err:
- tpm_tis_ready(chip);
- return rc;
}
static void disable_interrupts(struct tpm_chip *chip)
@@ -437,13 +446,25 @@ static void disable_interrupts(struct tpm_chip *chip)
static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
+ int rc, i;
u32 ordinal;
unsigned long dur;
- rc = tpm_tis_send_data(chip, buf, len);
- if (rc < 0)
- return rc;
+ for (i = 0; i < TPM_RETRY; i++) {
+ rc = tpm_tis_send_data(chip, buf, len);
+ if (rc < 0)
+ continue;
+ if (priv->phy_ops->verify_data_integrity) {
+ if (!priv->phy_ops->verify_data_integrity(priv, buf,
+ len)){
+ rc = -EIO;
+ continue;
+ }
+ }
+ break;
+ }
+ if (i == TPM_RETRY)
+ goto out_err;
/* go and do it */
rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index d06c65b..cd97c01 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -34,6 +34,7 @@ enum tis_status {
TPM_STS_GO = 0x20,
TPM_STS_DATA_AVAIL = 0x10,
TPM_STS_DATA_EXPECT = 0x08,
+ TPM_STS_RESPONSE_RETRY = 0x02,
};
enum tis_int_flags {
@@ -106,6 +107,8 @@ struct tpm_tis_phy_ops {
int (*read16)(struct tpm_tis_data *data, u32 addr, u16 *result);
int (*read32)(struct tpm_tis_data *data, u32 addr, u32 *result);
int (*write32)(struct tpm_tis_data *data, u32 addr, u32 src);
+ bool (*verify_data_integrity)(struct tpm_tis_data *data, const u8 *buf,
+ size_t len);
};
static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
--
2.7.4
next prev parent reply other threads:[~2020-05-26 14:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 14:16 [PATCH v9 0/8] Add tpm i2c ptp driver amirmizi6
2020-05-26 14:16 ` [PATCH v9 1/8] tpm: tpm_tis: Make implementation of read16, read32 and write32 optional amirmizi6
2020-06-01 2:23 ` Jarkko Sakkinen
2020-05-26 14:16 ` [PATCH v9 2/8] tpm: tpm_tis: Fix expected bit handling and send all bytes in one shot without last byte in exception amirmizi6
2020-06-01 2:30 ` Jarkko Sakkinen
2020-05-26 14:16 ` amirmizi6 [this message]
2020-05-26 14:16 ` [PATCH v9 4/8] tpm: tpm_tis: Rewrite "tpm_tis_req_canceled()" amirmizi6
2020-05-26 14:16 ` [PATCH v9 5/8] tpm: Handle an exception for TPM Firmware Update mode amirmizi6
2020-05-26 14:16 ` [PATCH v9 6/8] tpm: tpm_tis: verify TPM_STS register is valid after locality request amirmizi6
2020-05-26 14:16 ` [PATCH v9 7/8] tpm: Add YAML schema for TPM TIS I2C options amirmizi6
2020-05-26 18:31 ` Rob Herring
2020-05-26 14:16 ` [PATCH v9 8/8] tpm: tpm_tis: add tpm_tis_i2c driver amirmizi6
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526141658.157801-4-amirmizi6@gmail.com \
--to=amirmizi6@gmail.com \
--cc="benoit.houyere@st.com--to=mark.rutland"@arm.com \
--cc=Dan.Morav@nuvoton.com \
--cc=Eyal.Cohen@nuvoton.com \
--cc=alexander.steffen@infineon.com \
--cc=amir.mizinski@nuvoton.com \
--cc=arnd@arndb.de \
--cc=christophe-h.ricard@st.com \
--cc=christophe-h.richard@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gcwilson@us.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=kgoldman@us.ibm.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oren.tanami@nuvoton.com \
--cc=oshri.alkoby@nuvoton.com \
--cc=oshrialkoby85@gmail.com \
--cc=peterhuewe@gmx.de \
--cc=robh+dt@kernel.org \
--cc=shmulik.hager@nuvoton.com \
--cc=tmaimon77@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).