From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: vkuznets@redhat.com, mlevitsk@redhat.com,
Sean Christopherson <sean.j.christopherson@intel.com>,
Jim Mattson <jmattson@google.com>
Subject: [PATCH 26/28] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu
Date: Tue, 26 May 2020 13:23:06 -0400 [thread overview]
Message-ID: <20200526172308.111575-27-pbonzini@redhat.com> (raw)
In-Reply-To: <20200526172308.111575-1-pbonzini@redhat.com>
This allows fetching the registers from the hsave area when setting
up the NPT shadow MMU, and is needed for KVM_SET_NESTED_STATE (which
runs long after the CR0, CR4 and EFER values in vcpu have been switched
to hold L2 guest state).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/mmu.h | 2 +-
arch/x86/kvm/mmu/mmu.c | 14 +++++++++-----
arch/x86/kvm/svm/nested.c | 5 ++++-
3 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 8a3b1bce722a..45c1ae872a34 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -57,7 +57,7 @@ void
reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context);
void kvm_init_mmu(struct kvm_vcpu *vcpu, bool reset_roots);
-void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu);
+void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer);
void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
bool accessed_dirty, gpa_t new_eptp);
bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 2df0f347655a..fbc061df57ab 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4956,7 +4956,7 @@ kvm_calc_shadow_mmu_root_page_role(struct kvm_vcpu *vcpu, bool base_only)
return role;
}
-void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu)
+void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer)
{
struct kvm_mmu *context = vcpu->arch.mmu;
union kvm_mmu_role new_role =
@@ -4965,11 +4965,11 @@ void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu)
if (new_role.as_u64 == context->mmu_role.as_u64)
return;
- if (!is_paging(vcpu))
+ if (!(cr0 & X86_CR0_PG))
nonpaging_init_context(vcpu, context);
- else if (is_long_mode(vcpu))
+ else if (efer & EFER_LMA)
paging64_init_context(vcpu, context);
- else if (is_pae(vcpu))
+ else if (cr4 & X86_CR4_PAE)
paging32E_init_context(vcpu, context);
else
paging32_init_context(vcpu, context);
@@ -5047,7 +5047,11 @@ static void init_kvm_softmmu(struct kvm_vcpu *vcpu)
{
struct kvm_mmu *context = vcpu->arch.mmu;
- kvm_init_shadow_mmu(vcpu);
+ kvm_init_shadow_mmu(vcpu,
+ kvm_read_cr0_bits(vcpu, X86_CR0_PG),
+ kvm_read_cr4_bits(vcpu, X86_CR4_PAE),
+ vcpu->arch.efer);
+
context->get_guest_pgd = get_cr3;
context->get_pdptr = kvm_pdptr_read;
context->inject_page_fault = kvm_inject_page_fault;
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index e63e62d12acd..840662e66976 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -80,10 +80,13 @@ static unsigned long nested_svm_get_tdp_cr3(struct kvm_vcpu *vcpu)
static void nested_svm_init_mmu_context(struct kvm_vcpu *vcpu)
{
+ struct vcpu_svm *svm = to_svm(vcpu);
+ struct vmcb *hsave = svm->nested.hsave;
+
WARN_ON(mmu_is_nested(vcpu));
vcpu->arch.mmu = &vcpu->arch.guest_mmu;
- kvm_init_shadow_mmu(vcpu);
+ kvm_init_shadow_mmu(vcpu, X86_CR0_PG, hsave->save.cr4, hsave->save.efer);
vcpu->arch.mmu->get_guest_pgd = nested_svm_get_tdp_cr3;
vcpu->arch.mmu->get_pdptr = nested_svm_get_tdp_pdptr;
vcpu->arch.mmu->inject_page_fault = nested_svm_inject_npf_exit;
--
2.26.2
next prev parent reply other threads:[~2020-05-26 17:24 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 17:22 [PATCH v2 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-26 17:22 ` [PATCH 01/28] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-26 17:22 ` [PATCH 02/28] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 2:16 ` Krish Sadhukhan
2020-05-29 8:47 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 03/28] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2021-03-06 1:39 ` Sean Christopherson
2021-03-06 9:26 ` Paolo Bonzini
2021-03-08 16:44 ` Sean Christopherson
2021-03-08 17:28 ` Paolo Bonzini
2021-03-08 20:43 ` Sean Christopherson
2021-03-08 22:51 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 04/28] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-26 17:22 ` [PATCH 05/28] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 6:46 ` Krish Sadhukhan
2020-05-29 8:47 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 06/28] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-26 17:22 ` [PATCH 07/28] KVM: nVMX: always update CR3 in VMCS Paolo Bonzini
2020-05-26 17:22 ` [PATCH 08/28] KVM: nSVM: move map argument out of enter_svm_guest_mode Paolo Bonzini
2020-05-26 17:22 ` [PATCH 09/28] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-26 17:22 ` [PATCH 10/28] KVM: nSVM: extract preparation of VMCB for nested run Paolo Bonzini
2020-05-26 17:22 ` [PATCH 11/28] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-26 17:22 ` [PATCH 12/28] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-26 17:22 ` [PATCH 13/28] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-26 17:22 ` [PATCH 14/28] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-26 17:22 ` [PATCH 15/28] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-26 17:22 ` [PATCH 16/28] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-26 17:22 ` [PATCH 17/28] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-26 17:22 ` [PATCH 18/28] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-26 17:22 ` [PATCH 19/28] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-05-26 17:23 ` [PATCH 20/28] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-26 17:23 ` [PATCH 21/28] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-26 17:23 ` [PATCH 22/28] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-26 17:23 ` [PATCH 23/28] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-26 17:23 ` [PATCH 24/28] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-26 17:23 ` [PATCH 25/28] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-05-26 17:23 ` Paolo Bonzini [this message]
2020-05-26 17:23 ` [PATCH 27/28] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-26 17:23 ` [PATCH 28/28] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526172308.111575-27-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).