From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: vkuznets@redhat.com, mlevitsk@redhat.com,
Sean Christopherson <sean.j.christopherson@intel.com>,
Jim Mattson <jmattson@google.com>
Subject: [PATCH 07/28] KVM: nVMX: always update CR3 in VMCS
Date: Tue, 26 May 2020 13:22:47 -0400 [thread overview]
Message-ID: <20200526172308.111575-8-pbonzini@redhat.com> (raw)
In-Reply-To: <20200526172308.111575-1-pbonzini@redhat.com>
vmx_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
Fixes: 04f11ef45810 ("KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/vmx/vmx.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index aedc46407b1f..7efdc3c2f7f2 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -3085,10 +3085,7 @@ void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long pgd)
spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
}
- /* Loading vmcs02.GUEST_CR3 is handled by nested VM-Enter. */
- if (is_guest_mode(vcpu))
- update_guest_cr3 = false;
- else if (!enable_unrestricted_guest && !is_paging(vcpu))
+ if (!enable_unrestricted_guest && !is_paging(vcpu))
guest_cr3 = to_kvm_vmx(kvm)->ept_identity_map_addr;
else if (test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail))
guest_cr3 = vcpu->arch.cr3;
--
2.26.2
next prev parent reply other threads:[~2020-05-26 17:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 17:22 [PATCH v2 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-26 17:22 ` [PATCH 01/28] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-26 17:22 ` [PATCH 02/28] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 2:16 ` Krish Sadhukhan
2020-05-29 8:47 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 03/28] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2021-03-06 1:39 ` Sean Christopherson
2021-03-06 9:26 ` Paolo Bonzini
2021-03-08 16:44 ` Sean Christopherson
2021-03-08 17:28 ` Paolo Bonzini
2021-03-08 20:43 ` Sean Christopherson
2021-03-08 22:51 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 04/28] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-26 17:22 ` [PATCH 05/28] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 6:46 ` Krish Sadhukhan
2020-05-29 8:47 ` Paolo Bonzini
2020-05-26 17:22 ` [PATCH 06/28] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-26 17:22 ` Paolo Bonzini [this message]
2020-05-26 17:22 ` [PATCH 08/28] KVM: nSVM: move map argument out of enter_svm_guest_mode Paolo Bonzini
2020-05-26 17:22 ` [PATCH 09/28] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-26 17:22 ` [PATCH 10/28] KVM: nSVM: extract preparation of VMCB for nested run Paolo Bonzini
2020-05-26 17:22 ` [PATCH 11/28] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-26 17:22 ` [PATCH 12/28] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-26 17:22 ` [PATCH 13/28] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-26 17:22 ` [PATCH 14/28] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-26 17:22 ` [PATCH 15/28] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-26 17:22 ` [PATCH 16/28] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-26 17:22 ` [PATCH 17/28] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-26 17:22 ` [PATCH 18/28] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-26 17:22 ` [PATCH 19/28] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-05-26 17:23 ` [PATCH 20/28] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-26 17:23 ` [PATCH 21/28] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-26 17:23 ` [PATCH 22/28] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-26 17:23 ` [PATCH 23/28] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-26 17:23 ` [PATCH 24/28] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-26 17:23 ` [PATCH 25/28] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-05-26 17:23 ` [PATCH 26/28] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu Paolo Bonzini
2020-05-26 17:23 ` [PATCH 27/28] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-26 17:23 ` [PATCH 28/28] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526172308.111575-8-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).