From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Wolfram Sang <wsa@the-dreams.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>, <linux-mips@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 11/12] i2c: designware: Move reg-space remapping into a dedicated function
Date: Wed, 27 May 2020 00:55:27 +0300 [thread overview]
Message-ID: <20200526215528.16417-12-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200526215528.16417-1-Sergey.Semin@baikalelectronics.ru>
This is a preparation patch before adding a quirk with custom registers
map creation required for the Baikal-T1 System I2C support. Since we've
touched this code anyway let's replace
platform_get_resource()-devm_ioremap_resource() tuple with ready-to-use
helper devm_platform_get_and_ioremap_resource().
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v3:
- This is a new patch, which has been created due to declining the
glue-layer approach.
---
drivers/i2c/busses/i2c-designware-platdrv.c | 23 ++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5ef7ffcf7f85..93bdcfae57df 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -234,6 +234,18 @@ static const u32 supported_speeds[] = {
I2C_MAX_STANDARD_MODE_FREQ,
};
+static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev->dev);
+ int ret = 0;
+
+ dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(dev->base))
+ ret = PTR_ERR(dev->base);
+
+ return ret;
+}
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -241,7 +253,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
struct dw_i2c_dev *dev;
struct i2c_timings *t;
u32 acpi_speed;
- struct resource *mem;
int i, irq, ret;
irq = platform_get_irq(pdev, 0);
@@ -253,16 +264,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
return -ENOMEM;
dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dev->base = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(dev->base))
- return PTR_ERR(dev->base);
-
dev->dev = &pdev->dev;
dev->irq = irq;
platform_set_drvdata(pdev, dev);
+ ret = dw_i2c_plat_request_regs(dev);
+ if (ret)
+ return ret;
+
dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
if (IS_ERR(dev->rst))
return PTR_ERR(dev->rst);
--
2.26.2
next prev parent reply other threads:[~2020-05-26 21:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 21:55 [PATCH v3 00/12] i2c: designeware: Add Baikal-T1 System I2C support Serge Semin
2020-05-26 21:55 ` [PATCH v3 01/12] scripts/dtc: check: Add 10bit/slave i2c reg flags support Serge Semin
2020-05-27 1:17 ` Rob Herring
2020-05-27 9:46 ` Serge Semin
2020-05-27 11:20 ` Serge Semin
2020-05-26 21:55 ` [PATCH v3 02/12] dt-bindings: i2c: Convert DW I2C binding to DT schema Serge Semin
2020-05-27 1:20 ` Rob Herring
2020-05-26 21:55 ` [PATCH v3 03/12] dt-bindings: i2c: Discard i2c-slave flag from the DW I2C example Serge Semin
2020-05-27 9:30 ` Andy Shevchenko
2020-05-27 12:07 ` Serge Semin
2020-05-27 13:32 ` Andy Shevchenko
2020-05-26 21:55 ` [PATCH v3 04/12] dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller Serge Semin
2020-05-26 21:55 ` [PATCH v3 05/12] i2c: designware: Use `-y` to build multi-object modules Serge Semin
2020-05-26 21:55 ` [PATCH v3 06/12] i2c: designware: slave: Set DW I2C core module dependency Serge Semin
2020-05-26 21:55 ` [PATCH v3 07/12] i2c: designware: Add Baytrail sem config DW I2C platform dependency Serge Semin
2020-05-26 21:55 ` [PATCH v3 08/12] i2c: designware: Discard Cherry Trail model flag Serge Semin
2020-05-26 21:55 ` [PATCH v3 09/12] i2c: designware: Convert driver to using regmap API Serge Semin
2020-05-26 21:55 ` [PATCH v3 10/12] i2c: designware: Retrieve quirk flags as early as possible Serge Semin
2020-05-26 21:55 ` Serge Semin [this message]
2020-05-27 9:26 ` [PATCH v3 11/12] i2c: designware: Move reg-space remapping into a dedicated function Andy Shevchenko
2020-05-27 9:50 ` Serge Semin
2020-05-27 10:18 ` Andy Shevchenko
2020-05-26 21:55 ` [PATCH v3 12/12] i2c: designware: Add Baikal-T1 System I2C support Serge Semin
2020-05-27 13:30 ` [PATCH v3 00/12] i2c: designeware: " Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526215528.16417-12-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).