From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: <devicetree-compiler@vger.kernel.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Wolfram Sang <wsa@the-dreams.de>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Frank Rowand <frowand.list@gmail.com>,
Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] check: Add 10bit/slave i2c reg flags support
Date: Wed, 27 May 2020 15:25:25 +0300 [thread overview]
Message-ID: <20200527122525.6929-1-Sergey.Semin@baikalelectronics.ru> (raw)
Recently the I2C-controllers slave interface support was added to the
kernel I2C subsystem. In this case Linux can be used as, for example,
a I2C EEPROM machine. See [1] for details. Other than instantiating
the EEPROM-slave device from user-space there is a way to declare the
device in dts. In this case firstly the I2C bus controller must support
the slave interface. Secondly I2C-slave sub-node of that controller
must have "reg"-property with flag I2C_OWN_SLAVE_ADDRESS set (flag is
declared in [2]). That flag is declared as (1 << 30), which when set
makes dtc unhappy about too big address set for a I2C-slave:
Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64: I2C bus unit address format error, expected "40000064"
Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64:reg: I2C address must be less than 10-bits, got "0x40000064"
Similar problem would have happened if we had set the 10-bit address
flag I2C_TEN_BIT_ADDRESS in the "reg"-property.
In order to fix the problem we suggest to alter the I2C-bus reg-check
algorithm, so one would be aware of the upper bits set. Normally if no
flag specified, the 7-bit address is expected in the "reg"-property.
If I2C_TEN_BIT_ADDRESS is set, then the 10-bit address check will be
performed. The I2C_OWN_SLAVE_ADDRESS flag will be just ignored.
[1] kernel/Documentation/i2c/slave-interface.rst
[2] kernel/include/dt-bindings/i2c/i2c.h
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree-compiler@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
checks.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/checks.c b/checks.c
index 4b3c486f1399..6321fc5b7404 100644
--- a/checks.c
+++ b/checks.c
@@ -1028,6 +1028,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
const char *unitname = get_unitname(node);
char unit_addr[17];
uint32_t reg = 0;
+ uint32_t addr;
int len;
cell_t *cells = NULL;
@@ -1044,17 +1045,21 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
}
reg = fdt32_to_cpu(*cells);
- snprintf(unit_addr, sizeof(unit_addr), "%x", reg);
+ addr = reg & 0x3FFFFFFFU;
+ snprintf(unit_addr, sizeof(unit_addr), "%x", addr);
if (!streq(unitname, unit_addr))
FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"",
unit_addr);
for (len = prop->val.len; len > 0; len -= 4) {
reg = fdt32_to_cpu(*(cells++));
- if (reg > 0x3ff)
+ addr = reg & 0x3FFFFFFFU;
+ if ((reg & (1 << 31)) && addr > 0x3ff)
FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
- reg);
-
+ addr);
+ else if (!(reg & (1 << 31)) && addr > 0x7f)
+ FAIL_PROP(c, dti, node, prop, "I2C address must be less than 7-bits, got \"0x%x\"",
+ addr);
}
}
WARNING(i2c_bus_reg, check_i2c_bus_reg, NULL, ®_format, &i2c_bus_bridge);
--
2.26.2
next reply other threads:[~2020-05-27 12:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 12:25 Serge Semin [this message]
2020-05-27 13:36 ` [PATCH] check: Add 10bit/slave i2c reg flags support Andy Shevchenko
2020-05-27 14:00 ` Serge Semin
2020-05-27 14:15 ` [PATCH v2] " Serge Semin
2020-05-30 9:31 ` Wolfram Sang
2020-05-31 19:07 ` Serge Semin
2020-06-01 17:08 ` Rob Herring
2020-06-02 7:46 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527122525.6929-1-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree-compiler@vger.kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=frowand.list@gmail.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).