[PATCH] spi: bcm2835: Enable shared interrupt support

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: Mark Brown <broonie@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Martin Sperl <kernel@martin.sperl.org>,
	linux-spi@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] spi: bcm2835: Enable shared interrupt support
Date: Thu, 28 May 2020 20:58:04 +0200	[thread overview]
Message-ID: <20200528185805.28991-1-nsaenzjulienne@suse.de> (raw)

From: Martin Sperl <kernel@martin.sperl.org>

bcm2711, Rasberry Pi 4's SoC, shares one interrupt for multiple
instances of the bcm2835 SPI controller. So this enables shared
interrupt support for them.

The early bail out in the interrupt routine avoids messing with buffers
of transfers being done by other means. Otherwise, the driver can handle
receiving interrupts asserted by other controllers during an IRQ based
transfer.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 drivers/spi/spi-bcm2835.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 11c235879bb7..ca1085c812f2 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -379,6 +379,10 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
 	if (bs->tx_len && cs & BCM2835_SPI_CS_DONE)
 		bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE);
 
+	/* check if we got interrupt enabled */
+	if (!(bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_INTR))
+		return IRQ_NONE;
+
 	/* Read as many bytes as possible from FIFO */
 	bcm2835_rd_fifo(bs);
 	/* Write as many bytes as possible to FIFO */
@@ -1340,8 +1344,8 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 
-	err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
-			       dev_name(&pdev->dev), ctlr);
+	err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt,
+			       IRQF_SHARED, dev_name(&pdev->dev), ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
 		goto out_dma_release;
-- 
2.26.2

