linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH 10/30] KVM: nSVM: extract preparation of VMCB for nested run
Date: Fri, 29 May 2020 11:39:14 -0400	[thread overview]
Message-ID: <20200529153934.11694-11-pbonzini@redhat.com> (raw)
In-Reply-To: <20200529153934.11694-1-pbonzini@redhat.com>

Split out filling svm->vmcb.save and svm->vmcb.control before VMRUN.
Only the latter will be useful when restoring nested SVM state.

This patch introduces no semantic change, so the MMU setup is still
done in nested_prepare_vmcb_save.  The next patch will clean up things.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 arch/x86/kvm/svm/nested.c | 40 +++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index fc0c6d1678eb..73be7af79453 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -245,21 +245,8 @@ static void load_nested_vmcb_control(struct vcpu_svm *svm,
 	svm->vcpu.arch.tsc_offset += control->tsc_offset;
 }
 
-void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
-			  struct vmcb *nested_vmcb)
+static void nested_prepare_vmcb_save(struct vcpu_svm *svm, struct vmcb *nested_vmcb)
 {
-	bool evaluate_pending_interrupts =
-		is_intercept(svm, INTERCEPT_VINTR) ||
-		is_intercept(svm, INTERCEPT_IRET);
-
-	svm->nested.vmcb = vmcb_gpa;
-	if (kvm_get_rflags(&svm->vcpu) & X86_EFLAGS_IF)
-		svm->vcpu.arch.hflags |= HF_HIF_MASK;
-	else
-		svm->vcpu.arch.hflags &= ~HF_HIF_MASK;
-
-	load_nested_vmcb_control(svm, &nested_vmcb->control);
-
 	if (nested_vmcb->control.nested_ctl & SVM_NESTED_CTL_NP_ENABLE)
 		nested_svm_init_mmu_context(&svm->vcpu);
 
@@ -291,7 +278,10 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
 	svm->vmcb->save.dr7 = nested_vmcb->save.dr7;
 	svm->vcpu.arch.dr6  = nested_vmcb->save.dr6;
 	svm->vmcb->save.cpl = nested_vmcb->save.cpl;
+}
 
+static void nested_prepare_vmcb_control(struct vcpu_svm *svm, struct vmcb *nested_vmcb)
+{
 	svm_flush_tlb(&svm->vcpu);
 	if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
 		svm->vcpu.arch.hflags |= HF_VINTR_MASK;
@@ -321,6 +311,26 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
 	 */
 	recalc_intercepts(svm);
 
+	mark_all_dirty(svm->vmcb);
+}
+
+void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
+			  struct vmcb *nested_vmcb)
+{
+	bool evaluate_pending_interrupts =
+		is_intercept(svm, INTERCEPT_VINTR) ||
+		is_intercept(svm, INTERCEPT_IRET);
+
+	svm->nested.vmcb = vmcb_gpa;
+	if (kvm_get_rflags(&svm->vcpu) & X86_EFLAGS_IF)
+		svm->vcpu.arch.hflags |= HF_HIF_MASK;
+	else
+		svm->vcpu.arch.hflags &= ~HF_HIF_MASK;
+
+	load_nested_vmcb_control(svm, &nested_vmcb->control);
+	nested_prepare_vmcb_save(svm, nested_vmcb);
+	nested_prepare_vmcb_control(svm, nested_vmcb);
+
 	/*
 	 * If L1 had a pending IRQ/NMI before executing VMRUN,
 	 * which wasn't delivered because it was disallowed (e.g.
@@ -336,8 +346,6 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
 	enable_gif(svm);
 	if (unlikely(evaluate_pending_interrupts))
 		kvm_make_request(KVM_REQ_EVENT, &svm->vcpu);
-
-	mark_all_dirty(svm->vmcb);
 }
 
 int nested_svm_vmrun(struct vcpu_svm *svm)
-- 
2.26.2



  parent reply	other threads:[~2020-05-29 15:41 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 15:39 [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-29 15:39 ` [PATCH 01/30] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-29 15:39 ` [PATCH 02/30] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 15:39 ` [PATCH 03/30] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2020-05-29 15:39 ` [PATCH 04/30] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-29 15:39 ` [PATCH 05/30] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 15:39 ` [PATCH 06/30] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-29 17:41   ` Krish Sadhukhan
2020-05-29 17:56     ` Sean Christopherson
2020-05-29 15:39 ` [PATCH 07/30] KVM: nVMX: always update CR3 in VMCS Paolo Bonzini
2020-05-29 15:39 ` [PATCH 08/30] KVM: nSVM: move map argument out of enter_svm_guest_mode Paolo Bonzini
2020-05-29 18:10   ` Krish Sadhukhan
2020-05-29 19:04     ` Paolo Bonzini
2020-05-29 20:02       ` Krish Sadhukhan
2020-05-29 15:39 ` [PATCH 09/30] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` Paolo Bonzini [this message]
2020-05-29 18:27   ` [PATCH 10/30] KVM: nSVM: extract preparation of VMCB for nested run Krish Sadhukhan
2020-05-29 19:02     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 11/30] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 12/30] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-29 15:39 ` [PATCH 13/30] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 14/30] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 15/30] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-29 15:39 ` [PATCH 16/30] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-29 15:39 ` [PATCH 17/30] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-30  2:06   ` Krish Sadhukhan
2020-05-30  5:10     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 18/30] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-29 15:39 ` [PATCH 19/30] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-06-05 20:33   ` Qian Cai
2020-06-08 11:11     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 20/30] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-31 23:11   ` Krish Sadhukhan
2020-06-01  7:30     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 21/30] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-29 15:39 ` [PATCH 22/30] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 23/30] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 24/30] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-29 15:39 ` [PATCH 25/30] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-06-01  2:26   ` Krish Sadhukhan
2020-06-01  7:28     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 26/30] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu Paolo Bonzini
2020-05-29 15:39 ` [PATCH 27/30] selftests: kvm: introduce cpu_has_svm() check Paolo Bonzini
2020-05-29 15:39 ` [PATCH 28/30] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-29 15:39 ` [PATCH 29/30] selftests: kvm: fix smm test on SVM Paolo Bonzini
2020-05-29 15:39 ` [PATCH 30/30] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
2020-06-02  0:11   ` Krish Sadhukhan
2020-06-04 14:47     ` Paolo Bonzini
2020-05-29 17:59 ` [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Sean Christopherson
2020-05-29 19:07   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529153934.11694-11-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).