linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH 08/30] KVM: nSVM: move map argument out of enter_svm_guest_mode
Date: Fri, 29 May 2020 11:39:12 -0400	[thread overview]
Message-ID: <20200529153934.11694-9-pbonzini@redhat.com> (raw)
In-Reply-To: <20200529153934.11694-1-pbonzini@redhat.com>

Unmapping the nested VMCB in enter_svm_guest_mode is a bit of a wart,
since the map is not used elsewhere in the function.  There are
just two calls, so move it there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 arch/x86/kvm/svm/nested.c | 14 ++++++--------
 arch/x86/kvm/svm/svm.c    |  3 ++-
 arch/x86/kvm/svm/svm.h    |  2 +-
 3 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 8756c9f463fd..8e98d5e420a5 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -229,7 +229,7 @@ static bool nested_vmcb_checks(struct vmcb *vmcb)
 }
 
 void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
-			  struct vmcb *nested_vmcb, struct kvm_host_map *map)
+			  struct vmcb *nested_vmcb)
 {
 	bool evaluate_pending_interrupts =
 		is_intercept(svm, INTERCEPT_VINTR) ||
@@ -304,8 +304,6 @@ void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
 	svm->vmcb->control.pause_filter_thresh =
 		nested_vmcb->control.pause_filter_thresh;
 
-	kvm_vcpu_unmap(&svm->vcpu, map, true);
-
 	/* Enter Guest-Mode */
 	enter_guest_mode(&svm->vcpu);
 
@@ -368,10 +366,7 @@ int nested_svm_vmrun(struct vcpu_svm *svm)
 		nested_vmcb->control.exit_code_hi = 0;
 		nested_vmcb->control.exit_info_1  = 0;
 		nested_vmcb->control.exit_info_2  = 0;
-
-		kvm_vcpu_unmap(&svm->vcpu, &map, true);
-
-		return ret;
+		goto out;
 	}
 
 	trace_kvm_nested_vmrun(svm->vmcb->save.rip, vmcb_gpa,
@@ -414,7 +409,7 @@ int nested_svm_vmrun(struct vcpu_svm *svm)
 	copy_vmcb_control_area(hsave, vmcb);
 
 	svm->nested.nested_run_pending = 1;
-	enter_svm_guest_mode(svm, vmcb_gpa, nested_vmcb, &map);
+	enter_svm_guest_mode(svm, vmcb_gpa, nested_vmcb);
 
 	if (!nested_svm_vmrun_msrpm(svm)) {
 		svm->vmcb->control.exit_code    = SVM_EXIT_ERR;
@@ -425,6 +420,9 @@ int nested_svm_vmrun(struct vcpu_svm *svm)
 		nested_svm_vmexit(svm);
 	}
 
+out:
+	kvm_vcpu_unmap(&svm->vcpu, &map, true);
+
 	return ret;
 }
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index feb96a410f2d..76b3f553815e 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3814,7 +3814,8 @@ static int svm_pre_leave_smm(struct kvm_vcpu *vcpu, const char *smstate)
 		if (kvm_vcpu_map(&svm->vcpu, gpa_to_gfn(vmcb), &map) == -EINVAL)
 			return 1;
 		nested_vmcb = map.hva;
-		enter_svm_guest_mode(svm, vmcb, nested_vmcb, &map);
+		enter_svm_guest_mode(svm, vmcb, nested_vmcb);
+		kvm_vcpu_unmap(&svm->vcpu, &map, true);
 	}
 	return 0;
 }
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 89fab75dd4f5..33e3f09d7a8e 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -395,7 +395,7 @@ static inline bool nested_exit_on_nmi(struct vcpu_svm *svm)
 }
 
 void enter_svm_guest_mode(struct vcpu_svm *svm, u64 vmcb_gpa,
-			  struct vmcb *nested_vmcb, struct kvm_host_map *map);
+			  struct vmcb *nested_vmcb);
 int nested_svm_vmrun(struct vcpu_svm *svm);
 void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb);
 int nested_svm_vmexit(struct vcpu_svm *svm);
-- 
2.26.2



  parent reply	other threads:[~2020-05-29 15:42 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 15:39 [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Paolo Bonzini
2020-05-29 15:39 ` [PATCH 01/30] KVM: x86: track manually whether an event has been injected Paolo Bonzini
2020-05-29 15:39 ` [PATCH 02/30] KVM: x86: enable event window in inject_pending_event Paolo Bonzini
2020-05-29 15:39 ` [PATCH 03/30] KVM: nSVM: inject exceptions via svm_check_nested_events Paolo Bonzini
2020-05-29 15:39 ` [PATCH 04/30] KVM: nSVM: remove exit_required Paolo Bonzini
2020-05-29 15:39 ` [PATCH 05/30] KVM: nSVM: correctly inject INIT vmexits Paolo Bonzini
2020-05-29 15:39 ` [PATCH 06/30] KVM: SVM: always update CR3 in VMCB Paolo Bonzini
2020-05-29 17:41   ` Krish Sadhukhan
2020-05-29 17:56     ` Sean Christopherson
2020-05-29 15:39 ` [PATCH 07/30] KVM: nVMX: always update CR3 in VMCS Paolo Bonzini
2020-05-29 15:39 ` Paolo Bonzini [this message]
2020-05-29 18:10   ` [PATCH 08/30] KVM: nSVM: move map argument out of enter_svm_guest_mode Krish Sadhukhan
2020-05-29 19:04     ` Paolo Bonzini
2020-05-29 20:02       ` Krish Sadhukhan
2020-05-29 15:39 ` [PATCH 09/30] KVM: nSVM: extract load_nested_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 10/30] KVM: nSVM: extract preparation of VMCB for nested run Paolo Bonzini
2020-05-29 18:27   ` Krish Sadhukhan
2020-05-29 19:02     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 11/30] KVM: nSVM: move MMU setup to nested_prepare_vmcb_control Paolo Bonzini
2020-05-29 15:39 ` [PATCH 12/30] KVM: nSVM: clean up tsc_offset update Paolo Bonzini
2020-05-29 15:39 ` [PATCH 13/30] KVM: nSVM: pass vmcb_control_area to copy_vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 14/30] KVM: nSVM: remove trailing padding for struct vmcb_control_area Paolo Bonzini
2020-05-29 15:39 ` [PATCH 15/30] KVM: nSVM: save all control fields in svm->nested Paolo Bonzini
2020-05-29 15:39 ` [PATCH 16/30] KVM: nSVM: restore clobbered INT_CTL fields after clearing VINTR Paolo Bonzini
2020-05-29 15:39 ` [PATCH 17/30] KVM: nSVM: synchronize VMCB controls updated by the processor on every vmexit Paolo Bonzini
2020-05-30  2:06   ` Krish Sadhukhan
2020-05-30  5:10     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 18/30] KVM: nSVM: remove unnecessary if Paolo Bonzini
2020-05-29 15:39 ` [PATCH 19/30] KVM: nSVM: extract svm_set_gif Paolo Bonzini
2020-06-05 20:33   ` Qian Cai
2020-06-08 11:11     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 20/30] KVM: SVM: preserve VGIF across VMCB switch Paolo Bonzini
2020-05-31 23:11   ` Krish Sadhukhan
2020-06-01  7:30     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 21/30] KVM: nSVM: synthesize correct EXITINTINFO on vmexit Paolo Bonzini
2020-05-29 15:39 ` [PATCH 22/30] KVM: nSVM: remove HF_VINTR_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 23/30] KVM: nSVM: remove HF_HIF_MASK Paolo Bonzini
2020-05-29 15:39 ` [PATCH 24/30] KVM: nSVM: split nested_vmcb_check_controls Paolo Bonzini
2020-05-29 15:39 ` [PATCH 25/30] KVM: nSVM: leave guest mode when clearing EFER.SVME Paolo Bonzini
2020-06-01  2:26   ` Krish Sadhukhan
2020-06-01  7:28     ` Paolo Bonzini
2020-05-29 15:39 ` [PATCH 26/30] KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu Paolo Bonzini
2020-05-29 15:39 ` [PATCH 27/30] selftests: kvm: introduce cpu_has_svm() check Paolo Bonzini
2020-05-29 15:39 ` [PATCH 28/30] selftests: kvm: add a SVM version of state-test Paolo Bonzini
2020-05-29 15:39 ` [PATCH 29/30] selftests: kvm: fix smm test on SVM Paolo Bonzini
2020-05-29 15:39 ` [PATCH 30/30] KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE Paolo Bonzini
2020-06-02  0:11   ` Krish Sadhukhan
2020-06-04 14:47     ` Paolo Bonzini
2020-05-29 17:59 ` [PATCH v3 00/28] KVM: nSVM: event fixes and migration support Sean Christopherson
2020-05-29 19:07   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529153934.11694-9-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).