From: Peter Zijlstra <peterz@infradead.org>
To: mingo@kernel.org, will@kernel.org, tglx@linutronix.de
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
a.darwish@linutronix.de, rostedt@goodmis.org,
bigeasy@linutronix.de, peterz@infradead.org, davem@davemloft.net,
sparclinux@vger.kernel.org, mpe@ellerman.id.au,
linuxppc-dev@lists.ozlabs.org, heiko.carstens@de.ibm.com,
linux-s390@vger.kernel.org
Subject: [PATCH v3 2/5] powerpc64: Break asm/percpu.h vs spinlock_types.h dependency
Date: Fri, 29 May 2020 23:35:52 +0200 [thread overview]
Message-ID: <20200529214203.729797639@infradead.org> (raw)
In-Reply-To: 20200529213550.683440625@infradead.org
In order to use <asm/percpu.h> in lockdep.h, we need to make sure
asm/percpu.h does not itself depend on lockdep.
The below seems to make that so and builds powerpc64-defconfig +
PROVE_LOCKING.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
arch/powerpc/include/asm/dtl.h | 52 +++++++++++++++++++++++++++++++++
arch/powerpc/include/asm/lppaca.h | 44 ---------------------------
arch/powerpc/kernel/time.c | 1
arch/powerpc/kvm/book3s_hv.c | 1
arch/powerpc/platforms/pseries/dtl.c | 1
arch/powerpc/platforms/pseries/lpar.c | 1
arch/powerpc/platforms/pseries/setup.c | 1
arch/powerpc/platforms/pseries/svm.c | 1
8 files changed, 58 insertions(+), 44 deletions(-)
--- /dev/null
+++ b/arch/powerpc/include/asm/dtl.h
@@ -0,0 +1,52 @@
+#ifndef _ASM_POWERPC_DTL_H
+#define _ASM_POWERPC_DTL_H
+
+#include <asm/lppaca.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * Layout of entries in the hypervisor's dispatch trace log buffer.
+ */
+struct dtl_entry {
+ u8 dispatch_reason;
+ u8 preempt_reason;
+ __be16 processor_id;
+ __be32 enqueue_to_dispatch_time;
+ __be32 ready_to_enqueue_time;
+ __be32 waiting_to_ready_time;
+ __be64 timebase;
+ __be64 fault_addr;
+ __be64 srr0;
+ __be64 srr1;
+};
+
+#define DISPATCH_LOG_BYTES 4096 /* bytes per cpu */
+#define N_DISPATCH_LOG (DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
+
+/*
+ * Dispatch trace log event enable mask:
+ * 0x1: voluntary virtual processor waits
+ * 0x2: time-slice preempts
+ * 0x4: virtual partition memory page faults
+ */
+#define DTL_LOG_CEDE 0x1
+#define DTL_LOG_PREEMPT 0x2
+#define DTL_LOG_FAULT 0x4
+#define DTL_LOG_ALL (DTL_LOG_CEDE | DTL_LOG_PREEMPT | DTL_LOG_FAULT)
+
+extern struct kmem_cache *dtl_cache;
+extern rwlock_t dtl_access_lock;
+
+/*
+ * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
+ * reading from the dispatch trace log. If other code wants to consume
+ * DTL entries, it can set this pointer to a function that will get
+ * called once for each DTL entry that gets processed.
+ */
+extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index);
+
+extern void register_dtl_buffer(int cpu);
+extern void alloc_dtl_buffers(unsigned long *time_limit);
+extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity);
+
+#endif /* _ASM_POWERPC_DTL_H */
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -42,7 +42,6 @@
*/
#include <linux/cache.h>
#include <linux/threads.h>
-#include <linux/spinlock_types.h>
#include <asm/types.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
@@ -146,49 +145,6 @@ struct slb_shadow {
} save_area[SLB_NUM_BOLTED];
} ____cacheline_aligned;
-/*
- * Layout of entries in the hypervisor's dispatch trace log buffer.
- */
-struct dtl_entry {
- u8 dispatch_reason;
- u8 preempt_reason;
- __be16 processor_id;
- __be32 enqueue_to_dispatch_time;
- __be32 ready_to_enqueue_time;
- __be32 waiting_to_ready_time;
- __be64 timebase;
- __be64 fault_addr;
- __be64 srr0;
- __be64 srr1;
-};
-
-#define DISPATCH_LOG_BYTES 4096 /* bytes per cpu */
-#define N_DISPATCH_LOG (DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
-
-/*
- * Dispatch trace log event enable mask:
- * 0x1: voluntary virtual processor waits
- * 0x2: time-slice preempts
- * 0x4: virtual partition memory page faults
- */
-#define DTL_LOG_CEDE 0x1
-#define DTL_LOG_PREEMPT 0x2
-#define DTL_LOG_FAULT 0x4
-#define DTL_LOG_ALL (DTL_LOG_CEDE | DTL_LOG_PREEMPT | DTL_LOG_FAULT)
-
-extern struct kmem_cache *dtl_cache;
-extern rwlock_t dtl_access_lock;
-
-/*
- * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
- * reading from the dispatch trace log. If other code wants to consume
- * DTL entries, it can set this pointer to a function that will get
- * called once for each DTL entry that gets processed.
- */
-extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index);
-
-extern void register_dtl_buffer(int cpu);
-extern void alloc_dtl_buffers(unsigned long *time_limit);
extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity);
#endif /* CONFIG_PPC_BOOK3S */
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -69,6 +69,7 @@
#include <asm/vdso_datapage.h>
#include <asm/firmware.h>
#include <asm/asm-prototypes.h>
+#include <asm/dtl.h>
/* powerpc clocksource/clockevent code */
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -74,6 +74,7 @@
#include <asm/hw_breakpoint.h>
#include <asm/kvm_book3s_uvmem.h>
#include <asm/ultravisor.h>
+#include <asm/dtl.h>
#include "book3s.h"
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -12,6 +12,7 @@
#include <asm/smp.h>
#include <linux/uaccess.h>
#include <asm/firmware.h>
+#include <asm/dtl.h>
#include <asm/lppaca.h>
#include <asm/debugfs.h>
#include <asm/plpar_wrappers.h>
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -40,6 +40,7 @@
#include <asm/fadump.h>
#include <asm/asm-prototypes.h>
#include <asm/debugfs.h>
+#include <asm/dtl.h>
#include "pseries.h"
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -70,6 +70,7 @@
#include <asm/asm-const.h>
#include <asm/swiotlb.h>
#include <asm/svm.h>
+#include <asm/dtl.h>
#include "pseries.h"
#include "../../../../drivers/pci/pci.h"
--- a/arch/powerpc/platforms/pseries/svm.c
+++ b/arch/powerpc/platforms/pseries/svm.c
@@ -11,6 +11,7 @@
#include <asm/svm.h>
#include <asm/swiotlb.h>
#include <asm/ultravisor.h>
+#include <asm/dtl.h>
static int __init init_svm(void)
{
next prev parent reply other threads:[~2020-05-29 21:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 21:35 [PATCH v3 0/5] lockdep: Change IRQ state tracking to use per-cpu variables Peter Zijlstra
2020-05-29 21:35 ` [RFC][PATCH v3 1/5] sparc64: Fix asm/percpu.h build error Peter Zijlstra
2020-05-29 23:29 ` David Miller
2020-06-04 16:57 ` Peter Zijlstra
2020-06-04 20:41 ` Peter Zijlstra
2020-05-29 21:35 ` Peter Zijlstra [this message]
2020-05-29 21:35 ` [PATCH v3 3/5] s390: Break cyclic percpu include Peter Zijlstra
2020-05-29 21:35 ` [PATCH v3 4/5] lockdep: Change hardirq{s_enabled,_context} to per-cpu variables Peter Zijlstra
2020-05-29 21:35 ` [PATCH v3 5/5] lockdep: Remove lockdep_hardirq{s_enabled,_context}() argument Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529214203.729797639@infradead.org \
--to=peterz@infradead.org \
--cc=a.darwish@linutronix.de \
--cc=bigeasy@linutronix.de \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@kernel.org \
--cc=mpe@ellerman.id.au \
--cc=rostedt@goodmis.org \
--cc=sparclinux@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).