From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
kamel.bouhara@bootlin.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema
Date: Sat, 30 May 2020 01:27:41 +0200 [thread overview]
Message-ID: <20200529232749.299627-2-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20200529232749.299627-1-alexandre.belloni@bootlin.com>
Convert Atmel Timer Counter Blocks bindings to DT schema format using
json-schema.
Also move it out of mfd as it is not and has never been related to mfd.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v4:
- use oneOf to describe possible clock-names list
.../devicetree/bindings/mfd/atmel-tcb.txt | 56 --------
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 131 ++++++++++++++++++
2 files changed, 131 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt
create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
deleted file mode 100644
index c4a83e364cb6..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Device tree bindings for Atmel Timer Counter Blocks
-- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
- <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- #address-cells: has to be 1
-- #size-cells: has to be 0
-- interrupts: Should contain all interrupts for the TC block
- Note that you can specify several interrupt cells if the TC
- block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
- Required elements: "t0_clk", "slow_clk"
- Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-The TCB can expose multiple subdevices:
- * a timer
- - compatible: Should be "atmel,tcb-timer"
- - reg: Should contain the TCB channels to be used. If the
- counter width is 16 bits (at91rm9200-tcb), two consecutive
- channels are needed. Else, only one channel will be used.
-
-Examples:
-
-One interrupt per TC block:
- tcb0: timer@fff7c000 {
- compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfff7c000 0x100>;
- interrupts = <18 4>;
- clocks = <&tcb0_clk>, <&clk32k>;
- clock-names = "t0_clk", "slow_clk";
-
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
-One interrupt per TC channel in a TC block:
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4>, <27 4>, <28 4>;
- clocks = <&tcb1_clk>, <&clk32k>;
- clock-names = "t0_clk", "slow_clk";
- };
-
-
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
new file mode 100644
index 000000000000..9d680e0b9109
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Atmel Timer Counter Block
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+ The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+ timer has three channels with two counters each.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - atmel,at91rm9200-tcb
+ - atmel,at91sam9x5-tcb
+ - const: simple-mfd
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ List of interrupts. One interrupt per TCB channel if available or one
+ interrupt for the TC block
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ description:
+ List of clock names. Always includes t0_clk and slow clk. Also includes
+ t1_clk and t2_clk if a clock per channel is available.
+ oneOf:
+ - items:
+ - const: t0_clk
+ - const: slow_clk
+ - items:
+ - const: t0_clk
+ - const: t1_clk
+ - const: t2_clk
+ - const: slow_clk
+ minItems: 2
+ maxItems: 4
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^timer@[0-2]$":
+ description: The timer block channels that are used as timers.
+ type: object
+ properties:
+ compatible:
+ const: atmel,tcb-timer
+ reg:
+ description:
+ List of channels to use for this particular timer.
+ minItems: 1
+ maxItems: 3
+
+ required:
+ - compatible
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ /* One interrupt per TC block: */
+ tcb0: timer@fff7c000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff7c000 0x100>;
+ interrupts = <18 4>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+ };
+
+ /* One interrupt per TC channel in a TC block: */
+ tcb1: timer@fffdc000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4>, <27 4>, <28 4>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+ };
--
2.26.2
next prev parent reply other threads:[~2020-05-29 23:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 23:27 [PATCH v4 0/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support Alexandre Belloni
2020-05-29 23:27 ` Alexandre Belloni [this message]
2020-06-09 20:31 ` [PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema Rob Herring
2020-05-29 23:27 ` [PATCH v4 2/9] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 3/9] ARM: dts: at91: sama5d2: add TCB GCLK Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 4/9] ARM: at91: add atmel tcb capabilities Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 5/9] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 7/9] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 8/9] clocksource/drivers/timer-atmel-tcb: allow selecting first divider Alexandre Belloni
2020-05-29 23:27 ` [PATCH v4 9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529232749.299627-2-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=bigeasy@linutronix.de \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).