[5.6,137/177] gpio: fix locking open drain IRQ lines
diff mbox series

Message ID 20200601174059.839010895@linuxfoundation.org
State New
Headers show
Series
  • Untitled series #446659
Related show

Commit Message

Greg KH June 1, 2020, 5:54 p.m. UTC
From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e9bdf7e655b9ee81ee912fae1d59df48ce7311b6 ]

We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".

Fix the semantics to allow output open drain lines to be used
for IRQs.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Russell King <linux@armlinux.org.uk>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 00fb91feba70..2f350e3df965 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4025,7 +4025,9 @@  int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
 		}
 	}
 
-	if (test_bit(FLAG_IS_OUT, &desc->flags)) {
+	/* To be valid for IRQ the line needs to be input or open drain */
+	if (test_bit(FLAG_IS_OUT, &desc->flags) &&
+	    !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		chip_err(chip,
 			 "%s: tried to flag a GPIO set as output for IRQ\n",
 			 __func__);
@@ -4088,7 +4090,12 @@  void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
 
 	if (!IS_ERR(desc) &&
 	    !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) {
-		WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags));
+		/*
+		 * We must not be output when using IRQ UNLESS we are
+		 * open drain.
+		 */
+		WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags) &&
+			!test_bit(FLAG_OPEN_DRAIN, &desc->flags));
 		set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags);
 	}
 }