[v3,10/10] arm64: dts: actions: Add uSD support for Cubieboard7
diff mbox series

Message ID 1591119192-18538-11-git-send-email-amittomer25@gmail.com
State New
Headers show
Series
  • Add MMC and DMA support for Actions S700
Related show

Commit Message

Amit Tomer June 2, 2020, 5:33 p.m. UTC
This commit adds uSD support for Cubieboard7 board based on Actions Semi
S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
added yet, fixed regulator has been used as a regulator node.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v2:
	* No change.
Changes since v1:
        * No change.
Changes since RFC:
        * No change.
---
 arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 41 ++++++++++++++++++++++++
 arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
 2 files changed, 42 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..ec117eb12f3a 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -13,6 +13,7 @@ 
 
 	aliases {
 		serial3 = &uart3;
+		mmc0 = &mmc0;
 	};
 
 	chosen {
@@ -28,6 +29,23 @@ 
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	vcc_3v1: vcc-3v1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	sd_vcc: sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
 };
 
 &i2c0 {
@@ -81,6 +99,14 @@ 
 			bias-pull-up;
 		};
 	};
+
+	mmc0_default: mmc0_default {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+	};
 };
 
 &timer {
@@ -90,3 +116,18 @@ 
 &uart3 {
 	status = "okay";
 };
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_default>;
+	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index b1a34f95d44c..2bb29bc683ef 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -4,6 +4,7 @@ 
  */
 
 #include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/actions,s700-reset.h>
 #include <dt-bindings/power/owl-s700-powergate.h>