linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <johan@kernel.org>, <andy.shevchenko@gmail.com>,
	Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v2 4/6] iio: remove left-over comments about parent assignment
Date: Wed, 3 Jun 2020 14:40:21 +0300	[thread overview]
Message-ID: <20200603114023.175102-5-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20200603114023.175102-1-alexandru.ardelean@analog.com>

These were obtained by doing a 'git diff | grep \/\*', in the previous diff
to find comments. These needed a bit more manual review, as the semantic
patch isn't great for catching these.

The result is:
 	/* Initialize Counter device and driver data */
 	/* Initialize IIO device */
 	/* Establish that the iio_dev is a child of the spi device */
 	/* Estabilish that the iio_dev is a child of the spi device */
 	/* Initiate the Industrial I/O device */
 	/* Establish that the iio_dev is a child of the device */
-	/* establish that the iio_dev is a child of the i2c device */
-	/* establish that the iio_dev is a child of the i2c device */
 	/* This is only used for removal purposes */
 	/* setup the industrialio driver allocated elements */
 	/* variant specific configuration */
 	/* Setup for userspace synchronous on demand sampling. */
 	st->readback_delay_us += 5; /* Add tWAIT */
-	/* Establish that the iio_dev is a child of the i2c device */
 	/* Establish that the iio_dev is a child of the i2c device */

Out of which, 4 are really left-over comments about parent assignment.
3 of them are removed by the semantic patch, as the comment removed (by
spatch) would be for an empty line.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/adc/ad7476.c         | 1 -
 drivers/iio/adc/ad7887.c         | 1 -
 drivers/iio/dac/ad5446.c         | 1 -
 drivers/staging/iio/cdc/ad7746.c | 1 -
 4 files changed, 4 deletions(-)

diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index e2a69dd6a47e..6286e230f55b 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -300,7 +300,6 @@ static int ad7476_probe(struct spi_device *spi)
 
 	st->spi = spi;
 
-	/* Establish that the iio_dev is a child of the spi device */
 	indio_dev->dev.of_node = spi->dev.of_node;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
index ca4c98401ebc..0f93f5c8965d 100644
--- a/drivers/iio/adc/ad7887.c
+++ b/drivers/iio/adc/ad7887.c
@@ -264,7 +264,6 @@ static int ad7887_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 	st->spi = spi;
 
-	/* Estabilish that the iio_dev is a child of the spi device */
 	indio_dev->dev.of_node = spi->dev.of_node;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->info = &ad7887_info;
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index e01ba90dc106..5931bd630c4e 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -250,7 +250,6 @@ static int ad5446_probe(struct device *dev, const char *name,
 	st->reg = reg;
 	st->dev = dev;
 
-	/* Establish that the iio_dev is a child of the device */
 	indio_dev->name = name;
 	indio_dev->info = &ad5446_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index bd9803c7c5b6..dfd71e99e872 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -693,7 +693,6 @@ static int ad7746_probe(struct i2c_client *client,
 	chip->client = client;
 	chip->capdac_set = -1;
 
-	/* Establish that the iio_dev is a child of the i2c device */
 	indio_dev->name = id->name;
 	indio_dev->info = &ad7746_info;
 	indio_dev->channels = ad7746_channels;
-- 
2.25.1


  parent reply	other threads:[~2020-06-03 11:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03 11:40 [PATCH v2 0/6] iio: core: pass parent device as parameter during allocation Alexandru Ardelean
2020-06-03 11:40 ` [PATCH v2 1/6] " Alexandru Ardelean
2020-06-06 15:24   ` Jonathan Cameron
2020-06-03 11:40 ` [PATCH v2 2/6] iio: core: add iio_device_set_parent() helper Alexandru Ardelean
2020-06-06 15:25   ` Jonathan Cameron
2020-06-03 11:40 ` [PATCH v2 3/6] iio: remove explicit IIO device parent assignment Alexandru Ardelean
2020-06-03 11:40 ` Alexandru Ardelean [this message]
2020-06-06 15:46   ` [PATCH v2 4/6] iio: remove left-over comments about " Jonathan Cameron
2020-06-03 11:40 ` [PATCH v2 5/6] iio: light: lm3533-als: use iio_device_set_parent() to assign parent Alexandru Ardelean
2020-06-06 15:46   ` Jonathan Cameron
2020-06-03 11:40 ` [PATCH v2 6/6] iio: remove left-over parent assignments Alexandru Ardelean
2020-06-06 16:05   ` Jonathan Cameron
2020-06-11  6:52     ` Ardelean, Alexandru
2020-06-14 12:14       ` Jonathan Cameron
2020-06-03 11:41 ` [PATCH v2 0/6] iio: core: pass parent device as parameter during allocation Ardelean, Alexandru
2020-06-04 17:34   ` Jonathan Cameron
2020-06-06 16:02     ` Jonathan Cameron
2020-06-08  6:37       ` Alexandru Ardelean
2020-06-08 11:10         ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603114023.175102-5-alexandru.ardelean@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=johan@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).