From: Luca Ceresoli <luca@lucaceresoli.net>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Luca Ceresoli <luca@lucaceresoli.net>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Keerthy <j-keerthy@ti.com>,
Axel Lin <axel.lin@ingics.com>
Subject: [RFC 3/4] regulator: lp87565: dt: add LP87524-Q1 variant
Date: Wed, 3 Jun 2020 22:03:18 +0200 [thread overview]
Message-ID: <20200603200319.16184-4-luca@lucaceresoli.net> (raw)
In-Reply-To: <20200603200319.16184-1-luca@lucaceresoli.net>
Add the LP87524-Q1 to the lp87565 bindings document along with an example.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
.../devicetree/bindings/mfd/lp87565.txt | 47 ++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
index b75ae23a1ef3..839eac6b75c2 100644
--- a/Documentation/devicetree/bindings/mfd/lp87565.txt
+++ b/Documentation/devicetree/bindings/mfd/lp87565.txt
@@ -1,7 +1,8 @@
TI LP87565 PMIC MFD driver
Required properties:
- - compatible: one of "ti,lp87565", "ti,lp87565-q1", "ti,lp87561-q1"
+ - compatible: one of "ti,lp87565", "ti,lp87565-q1", "ti,lp87561-q1",
+ "ti,lp87524-q1"
- reg: I2C slave address.
- gpio-controller: Marks the device node as a GPIO Controller.
- #gpio-cells: Should be two. The first cell is the pin number and
@@ -64,3 +65,47 @@ lp87561_pmic: pmic@62 {
};
};
};
+
+Example for the TI LP87524-Q1 PMIC (four 1-phase output configuration):
+
+lp87524_pmic: pmic@60 {
+ compatible = "ti,lp87524-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck0-in-supply = <&vdd_5v0>;
+ buck1-in-supply = <&vdd_5v0>;
+ buck2-in-supply = <&vdd_5v0>;
+ buck3-in-supply = <&vdd_5v0>;
+
+ regulators {
+ buck0_reg: buck0 {
+ regulator-name = "buck0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: buck1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+};
--
2.27.0
next prev parent reply other threads:[~2020-06-03 20:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-03 20:03 [RFC 0/4] regulator: lp87565: ignore ENx pins and add LP87524-Q1 Luca Ceresoli
2020-06-03 20:03 ` [RFC 1/4] regulator: lp87565: enable voltage regardless of ENx pin Luca Ceresoli
2020-06-04 11:07 ` Mark Brown
2020-06-05 7:57 ` Luca Ceresoli
2020-06-03 20:03 ` [RFC 2/4] regulator: lp87565: dt: remove duplicated section Luca Ceresoli
2020-06-04 6:47 ` Lee Jones
2020-06-04 6:48 ` Lee Jones
2020-06-04 8:44 ` Luca Ceresoli
2020-06-12 22:19 ` Rob Herring
2020-06-14 20:00 ` Luca Ceresoli
2020-06-15 0:54 ` J, KEERTHY
2020-06-03 20:03 ` Luca Ceresoli [this message]
2020-06-04 6:01 ` [RFC 3/4] regulator: lp87565: dt: add LP87524-Q1 variant Lee Jones
2020-06-04 8:44 ` Luca Ceresoli
2020-06-03 20:03 ` [RFC 4/4] regulator: lp87565: " Luca Ceresoli
2020-06-04 6:44 ` Lee Jones
2020-06-04 8:52 ` Luca Ceresoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200603200319.16184-4-luca@lucaceresoli.net \
--to=luca@lucaceresoli.net \
--cc=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).