linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Marc Zyngier <maz@kernel.org>
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Masami Hiramatsu <masami.hiramatsu@linaro.org>,
	Jassi Brar <jaswinder.singh@linaro.org>,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v4 2/6] PCI: uniphier: Add misc interrupt handler to invoke PME and AER
Date: Fri,  5 Jun 2020 18:44:32 +0900	[thread overview]
Message-ID: <1591350276-15816-3-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1591350276-15816-1-git-send-email-hayashi.kunihiko@socionext.com>

The misc interrupts consisting of PME, AER, and Link event, is handled
by INTx handler, however, these interrupts should be also handled by
MSI handler.

This adds the function uniphier_pcie_misc_isr() that handles misc
interrupts, which is called from both INTx and MSI handlers.
This function detects PME and AER interrupts with the status register,
and invoke PME and AER drivers related to MSI.

And this sets the mask for misc interrupts from INTx if MSI is enabled
and sets the mask for misc interrupts from MSI if MSI is disabled.

Cc: Marc Zyngier <maz@kernel.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/pci/controller/dwc/pcie-uniphier.c | 57 ++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index a5401a0..5ce2479 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -44,7 +44,9 @@
 #define PCL_SYS_AUX_PWR_DET		BIT(8)
 
 #define PCL_RCV_INT			0x8108
+#define PCL_RCV_INT_ALL_INT_MASK	GENMASK(28, 25)
 #define PCL_RCV_INT_ALL_ENABLE		GENMASK(20, 17)
+#define PCL_RCV_INT_ALL_MSI_MASK	GENMASK(12, 9)
 #define PCL_CFG_BW_MGT_STATUS		BIT(4)
 #define PCL_CFG_LINK_AUTO_BW_STATUS	BIT(3)
 #define PCL_CFG_AER_RC_ERR_MSI_STATUS	BIT(2)
@@ -167,7 +169,15 @@ static void uniphier_pcie_stop_link(struct dw_pcie *pci)
 
 static void uniphier_pcie_irq_enable(struct uniphier_pcie_priv *priv)
 {
-	writel(PCL_RCV_INT_ALL_ENABLE, priv->base + PCL_RCV_INT);
+	u32 val;
+
+	val = PCL_RCV_INT_ALL_ENABLE;
+	if (pci_msi_enabled())
+		val |= PCL_RCV_INT_ALL_INT_MASK;
+	else
+		val |= PCL_RCV_INT_ALL_MSI_MASK;
+
+	writel(val, priv->base + PCL_RCV_INT);
 	writel(PCL_RCV_INTX_ALL_ENABLE, priv->base + PCL_RCV_INTX);
 }
 
@@ -231,32 +241,56 @@ static const struct irq_domain_ops uniphier_intx_domain_ops = {
 	.map = uniphier_pcie_intx_map,
 };
 
-static void uniphier_pcie_irq_handler(struct irq_desc *desc)
+static void uniphier_pcie_misc_isr(struct pcie_port *pp, bool is_msi)
 {
-	struct pcie_port *pp = irq_desc_get_handler_data(desc);
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	unsigned long reg;
-	u32 val, bit, virq;
+	u32 val, virq;
 
-	/* INT for debug */
 	val = readl(priv->base + PCL_RCV_INT);
 
 	if (val & PCL_CFG_BW_MGT_STATUS)
 		dev_dbg(pci->dev, "Link Bandwidth Management Event\n");
+
 	if (val & PCL_CFG_LINK_AUTO_BW_STATUS)
 		dev_dbg(pci->dev, "Link Autonomous Bandwidth Event\n");
-	if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
-		dev_dbg(pci->dev, "Root Error\n");
-	if (val & PCL_CFG_PME_MSI_STATUS)
-		dev_dbg(pci->dev, "PME Interrupt\n");
+
+	if (is_msi) {
+		if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
+			dev_dbg(pci->dev, "Root Error Status\n");
+
+		if (val & PCL_CFG_PME_MSI_STATUS)
+			dev_dbg(pci->dev, "PME Interrupt\n");
+
+		if (val & (PCL_CFG_AER_RC_ERR_MSI_STATUS |
+			   PCL_CFG_PME_MSI_STATUS)) {
+			virq = irq_linear_revmap(pp->irq_domain, 0);
+			generic_handle_irq(virq);
+		}
+	}
 
 	writel(val, priv->base + PCL_RCV_INT);
+}
+
+static void uniphier_pcie_msi_host_isr(struct pcie_port *pp)
+{
+	uniphier_pcie_misc_isr(pp, true);
+}
+
+static void uniphier_pcie_irq_handler(struct irq_desc *desc)
+{
+	struct pcie_port *pp = irq_desc_get_handler_data(desc);
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long reg;
+	u32 val, bit, virq;
 
 	/* INTx */
 	chained_irq_enter(chip, desc);
 
+	uniphier_pcie_misc_isr(pp, false);
+
 	val = readl(priv->base + PCL_RCV_INTX);
 	reg = FIELD_GET(PCL_RCV_INTX_ALL_STATUS, val);
 
@@ -330,6 +364,7 @@ static int uniphier_pcie_host_init(struct pcie_port *pp)
 
 static const struct dw_pcie_host_ops uniphier_pcie_host_ops = {
 	.host_init = uniphier_pcie_host_init,
+	.msi_host_isr = uniphier_pcie_msi_host_isr,
 };
 
 static int uniphier_add_pcie_port(struct uniphier_pcie_priv *priv,
-- 
2.7.4


  parent reply	other threads:[~2020-06-05  9:45 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-05  9:44 [PATCH v4 0/6] PCI: uniphier: Add features for UniPhier PCIe host controller Kunihiko Hayashi
2020-06-05  9:44 ` [PATCH v4 1/6] PCI: dwc: Add msi_host_isr() callback Kunihiko Hayashi
2020-06-05 11:44   ` Gustavo Pimentel
2020-06-05  9:44 ` Kunihiko Hayashi [this message]
2020-06-05  9:44 ` [PATCH v4 3/6] dt-bindings: PCI: uniphier: Add iATU register description Kunihiko Hayashi
2020-06-05  9:44 ` [PATCH v4 4/6] PCI: uniphier: Add iATU register support Kunihiko Hayashi
2020-06-05  9:44 ` [PATCH v4 5/6] PCI: uniphier: Add error message when failed to get phy Kunihiko Hayashi
2020-06-05  9:44 ` [PATCH v4 6/6] PCI: uniphier: Use devm_platform_ioremap_resource_byname() Kunihiko Hayashi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591350276-15816-3-git-send-email-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jaswinder.singh@linaro.org \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=masami.hiramatsu@linaro.org \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).