linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
	asutoshd@codeaurora.org, jejb@linux.ibm.com,
	martin.petersen@oracle.com, stanley.chu@mediatek.com,
	beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
	cang@codeaurora.org, ebiggers@kernel.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] scsi: ufs: remove wrapper function ufshcd_setup_clocks()
Date: Fri,  5 Jun 2020 22:05:20 +0200	[thread overview]
Message-ID: <20200605200520.20831-3-huobean@gmail.com> (raw)
In-Reply-To: <20200605200520.20831-1-huobean@gmail.com>

From: Bean Huo <beanhuo@micron.com>

The static function ufshcd_setup_clocks() is just a wrapper around
__ufshcd_setup_clocks(), remove it. Rename original function wrapped
__ufshcd_setup_clocks() to new ufshcd_setup_clocks().

Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 drivers/scsi/ufs/ufshcd.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ec4f55211648..531d0b7878db 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -215,9 +215,7 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
 static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
 static void ufshcd_hba_exit(struct ufs_hba *hba);
 static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
-				 bool skip_ref_clk);
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk);
 static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
 static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
 static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
@@ -1497,7 +1495,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 	}
 
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
-	ufshcd_setup_clocks(hba, true);
+	ufshcd_setup_clocks(hba, true, false);
 
 	ufshcd_enable_irq(hba);
 
@@ -1655,10 +1653,10 @@ static void ufshcd_gate_work(struct work_struct *work)
 	ufshcd_disable_irq(hba);
 
 	if (!ufshcd_is_link_active(hba))
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 	else
 		/* If link is active, device ref_clk can't be switched off */
-		__ufshcd_setup_clocks(hba, false, true);
+		ufshcd_setup_clocks(hba, false, true);
 
 	/*
 	 * In case you are here to cancel this work the gating state
@@ -7683,8 +7681,7 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
 	return 0;
 }
 
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
-					bool skip_ref_clk)
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk)
 {
 	int ret = 0;
 	struct ufs_clk_info *clki;
@@ -7747,11 +7744,6 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 	return ret;
 }
 
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
-{
-	return  __ufshcd_setup_clocks(hba, on, false);
-}
-
 static int ufshcd_init_clocks(struct ufs_hba *hba)
 {
 	int ret = 0;
@@ -7858,7 +7850,7 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
 	if (err)
 		goto out_disable_hba_vreg;
 
-	err = ufshcd_setup_clocks(hba, true);
+	err = ufshcd_setup_clocks(hba, true, false);
 	if (err)
 		goto out_disable_hba_vreg;
 
@@ -7880,7 +7872,7 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
 out_disable_vreg:
 	ufshcd_setup_vreg(hba, false);
 out_disable_clks:
-	ufshcd_setup_clocks(hba, false);
+	ufshcd_setup_clocks(hba, false, false);
 out_disable_hba_vreg:
 	ufshcd_setup_hba_vreg(hba, false);
 out:
@@ -7896,7 +7888,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
 		if (ufshcd_is_clkscaling_supported(hba))
 			if (hba->devfreq)
 				ufshcd_suspend_clkscaling(hba);
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 		ufshcd_setup_hba_vreg(hba, false);
 		hba->is_powered = false;
 		ufs_put_device_desc(hba);
@@ -8259,10 +8251,10 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	ufshcd_disable_irq(hba);
 
 	if (!ufshcd_is_link_active(hba))
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 	else
 		/* If link is active, device ref_clk can't be switched off */
-		__ufshcd_setup_clocks(hba, false, true);
+		ufshcd_setup_clocks(hba, false, true);
 
 	hba->clk_gating.state = CLKS_OFF;
 	trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state);
@@ -8321,7 +8313,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 
 	ufshcd_hba_vreg_set_hpm(hba);
 	/* Make sure clocks are enabled before accessing controller */
-	ret = ufshcd_setup_clocks(hba, true);
+	ret = ufshcd_setup_clocks(hba, true, false);
 	if (ret)
 		goto out;
 
@@ -8404,7 +8396,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	ufshcd_disable_irq(hba);
 	if (hba->clk_scaling.is_allowed)
 		ufshcd_suspend_clkscaling(hba);
-	ufshcd_setup_clocks(hba, false);
+	ufshcd_setup_clocks(hba, false, false);
 out:
 	hba->pm_op_in_progress = 0;
 	if (ret)
-- 
2.17.1


  parent reply	other threads:[~2020-06-05 20:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-05 20:05 [PATCH v3 0/2] scsi: ufs: cleanup UFS driver Bean Huo
2020-06-05 20:05 ` [PATCH v3 1/2] scsi: ufs: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Bean Huo
2020-06-06 23:20   ` Winkler, Tomas
2020-06-10  9:30     ` Bean Huo
2020-06-10 10:33       ` Winkler, Tomas
2020-06-11 15:52   ` Alim Akhtar
2020-06-05 20:05 ` Bean Huo [this message]
2020-06-06 23:28   ` [PATCH v3 2/2] scsi: ufs: remove wrapper function ufshcd_setup_clocks() Winkler, Tomas
2020-06-11 16:00     ` Alim Akhtar
2020-06-16  3:59 ` [PATCH v3 0/2] scsi: ufs: cleanup UFS driver Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200605200520.20831-3-huobean@gmail.com \
    --to=huobean@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=ebiggers@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).